PRD N° 0230 B Membro degli Accordi di Mutuo Riconoscimento EA, IAF e ILAC Signatory of EA, IAF and ILAC Mutual Recognition Agreements Notified Body 0498 EU Type Examination Certificate Date: 2021/05/21 n. 857212002/OE Validity: 2026/05/20 The hereunder described items of Personal Protective Equipment have overcome positively the “EU type examination” (Module B), proving their conformity to the safety and health requirements of the Regulation (EU) 2016/425 (Annex II) Manufacturer: MAXIMO MOTO SL (Responsible of the Carrer de Linares, nr.21 - 46018 – VALENCIA - SPAIN PPE) Type of PPE: Motorcyclist’s protective clothing – one-piece suit Category of PPE: II : “medium” risks. This certificate is based on reference standards listed below: its validity is no longer ensured should new version of the standards come into force. Model “R-Tech Hawk” 5 colorways Description: DESCRIPTION of the BLACK/BLUE/WHITE color variant: (*) BLACK/BLUE/WHITE external side: black cow leather (CI-CL-05); white cow leather (CI-CL-05-WHITE); blue cow leather (CI-CL-05-BLUE); black perforated cow leather (CI-CL-05-PERFORATED); white perforated cow leather (CI-CL-05-WHITE-PERFORATED); black stretch fabric (CI-STF- S-01); black neoprene (CI-NEOPRENE); black fabric tape (AC-01); black velcro “VELCRO LOOP” (CI-VELCRO-02); internal side: black stretch fabric (CI-STF-S-01); black neoprene (CI-NEOPRENE); black fabric tape (AC-01); black perforated knitting “11-BARAY MESH” (11-BARAY); black three-dimensional mesh “AIR MESH” (CI-AIR-MESH); black fabric “Polyester Fabric 600 D” (CI-P600D-BLK); black stretch fabric “LYCRA FABRIC” (CI-LYCRA); mid-layer: white foam material matched with white knitting (PLAYBOY+FOAM-WHT); white elasticized fabric declared Lycra (CI-LYCRA-WHT); white stretch knitting “PIPE ELASTIC” (WHITE KNITTING); anthracite foam material (EVA RUBBER); velcro fabric with EVA rubber declared 4 mm (CI-VLFBR-01); main fastening: by means of a plastic zipper with black metallic slider and hook and loop closure; sleeve and wrist closure: by means of a plastic zipper with silver metallic slider; leg and ankle closure: by means of a plastic zipper with black metallic slider; internal pockets: black perforated knitting “11-BARAY (*) The suit is available also MESH” (11-BARAY); shoulder protectors’ pocket: black perforated knitting “11-BARAY MESH” (11-BARAY); elbow protectors’ pocket: black cow leather (CI-CL-05); white cow in the following colour leather (CI-CL-05-WHITE); blue cow leather (CI-CL-05-BLUE); white foam material variants: BLACK/WHITE/FLUO matched with white knitting (PLAYBOY+FOAM-WHT); back protectors’ pocket: black ORANGE; perforated knitting “11-BARAY MESH” (11-BARAY); black three-dimensional mesh “AIR BLACK/WHITE/FLUO RED; MESH” (CI-AIR-MESH); knee protectors’ pocket: absent, attack by velcro fabric with EVA BLACK/FLUO rubber declared 4mm (CI-VLFBR-01). YELLOW/WHITE; BLACK/WHITE/GREY. CE Certified protectors (according to either EN 1621-1:2012 or EN 1621-2:2014) inserted See pictures on page 3. into the garment, all by SAFE TECH Srl: shoulder protector: art. 432; elbow protector: art. 520; back protector (optional): art. 851; knee protector: art. 630. Technical Standard: EN ISO 13688:2013 Protective clothing – general requirements EN 17092-4:2020 Protective garments for motorcycle riders – Part 4: Class A garments – Requirements. 1/3 Certificato ue E rev05 - 26/10/20 RICOTEST Via Tione, 9 - 37010 Pastrengo (VR) tel: +39 045 7170088 fax: +39 045 7110014 email: [email protected] P.I. 01491930234 PRD N° 0230 B Membro degli Accordi di Mutuo Riconoscimento EA, IAF e ILAC Signatory of EA, IAF and ILAC Mutual Recognition Agreements Notified Body 0498 EU Type Examination Certificate Date: 2021/05/21 n. 857212002/OE Validity: 2026/05/20 Intended use: Motorcycling: preventive use – correct fitting and positioning of the inner protectors is essential. Size range: Sizes: from ITA 46/EU 44 to ITA 62/EU 60 Technical File: DC-12924 Test report: RCT n° 3945007/E Functions and The garment offers limited protection against mechanical risks arising from impact and performance levels: abrasion in case of a fall while participating in motorcycling activities. This PPE item has reached the following performance: Class A(*): Class A garments offer a minimum necessary degree of protection from impact and abrasion and are expected to have the least ergonomic and weight penalties. (*):The Standard provides different classes of protection for garments including protectors/shells: AAA (highest class), AA (middle class) and A (lowest class); class B is for garments not including protectors / shells = just abrasion protection; class C is for impact protector ensemble garments. NOTES: the protection provided also depends on the correct fit of the garment; the CE-Certified incorporated impact protectors provide strengthened protection and must be kept in their place: this falls within the responsibility of the user. Marking: printed on a label stitched to the garment and including the following information: CE Marking; name, trademark and full address of the Manufacturer; item designation (declared as unique/ unambiguous); pictogram to indicate the intended use (motorcycling) + nr./year of the Standard of reference + indication of the class of protection achieved during laboratory tests; size; pictogram inviting the user to read the User Manual; other information: care and washing instructions, material compositions and production date. BLACK/BLUE/WHITE 2/3 Certificato ue E rev05 - 26/10/20 RICOTEST Via Tione, 9 - 37010 Pastrengo (VR) tel: +39 045 7170088 fax: +39 045 7110014 email: [email protected] P.I. 01491930234 PRD N° 0230 B Membro degli Accordi di Mutuo Riconoscimento EA, IAF e ILAC Signatory of EA, IAF and ILAC Mutual Recognition Agreements Notified Body 0498 EU Type Examination Certificate Date: 2021/05/21 n. 857212002/OE Validity: 2026/05/20 BLACK/WHITE/FLUO ORANGE BLACK/WHITE/FLUO RED BLACK/FLUO YELLOW/WHITE BLACK/WHITE/GREY NOTE: the Technical File contains a more detailed description of the PPE (material, method of assembly, photographs or drawings), performance data, safety functions and level of protection, elements of conformity to the basic and supplementary requirements. The Technical File is integral part of the present Certification, which has to be kept available by the applicant to be forwarded - upon request - to the entitled person (supervising body, Controlling Officer). 3/3 Certificato ue E rev05 - 26/10/20 RICOTEST Via Tione, 9 - 37010 Pastrengo (VR) tel: +39 045 7170088 fax: +39 045 7110014 email: [email protected] P.I. 01491930234
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-