Universal Dry Verge & Starter and End Cap Benefits Description Our unique starter unit includes a verge-end closure and a blanking cap to ensure a secure, infestation free and aesthetically pleasing finish. For use in both new build and refurbishment application, the unit is UV stable and comes in all colours. • Ensures an infestation free and aesthetically pleasing finish to the dry verge U • Weather resistant and UV Stable Installation Snap the starter kit off the blanking plate. Starting at the bottom edge of the roof, insert the starter piece into the front end of the verge unit, mark out the starter piece position on the facia and barge board. Remove the dry verge U and mechanically fix the starter piece into position through the grid. Refer to Dry verge U product information sheet for further information on our Dry Verge U system. Where required, insert the blanking plate over the final verge U nail grid to prevent water ingress. Colours: Grey, Brown and Terracotta Material: Polypropylene find us: Tel: +44 (0) 845 034 6008 e: enquiries@easy-trim.co.uk w: www.easy-trim.co.uk f: +44 (0) 845 034 6010 Unit 12B Metcalf Drive Altham Industrial Estate | Altham Lancashire | BB5 5TU | England TECHNICAL DATASHEET Universal Verge Unit Product Codes Profile at widest Profile at narrowest 150mm 410mm GREY EASYVERGEU/GREY BROWN EASYVERGEU/BROWN TERRACOTTA EASYVERGEU/TERRA BLACK EASYVERGEU/BLK Weight 0.20kg per Single 165mm 125mm 90mm 137mm Weight 0.13kg per Single Starter & End Cap Product Codes GREY EASYVERGEU/G/PCK BROWN EASYVERGEU/B/PCK TERRACOTTA EASYVERGEU/T/PCK BLACK EASYVERGEU/BL/PCK Blanking Plate Starter ISSUE DATE: November 2015 Other related products: • Easy-Trim Verge U • Easy-Trim Ridge End Caps & FlapCap Technology