Contribution Of Rust Preventive In Millipore Value Of Finished Parts The Millipore or contamination values of the finished or machined parts play an important role in improving the cleanliness of the component. Industries need clean parts that are free from particles and other contamination, based on the conditions standardized by ISO 16232, VDA 19 (German Automotive) and more of the same. Millipore tests are now an inherent part of industrial quality control (QC) standards and organizations are dependent on them to increase the efficiency and lifespan of their equipment. As manufacturing tolerance increases, contamination control becomes an important means of reducing wear and tear. The presence of contamination on machined parts results in the following potential problems for equipment users: Increased corrosion Friction between moving parts Component wear and the cause of equipment failures Obstruction in fluid flow in pipe and tubes Effects of Rust Preventive Oil on Contamination of Parts: Generally, parts are cleaned in washing machines to get rid of contamination. After cleaning, the part needs to be protected from rust therefore oil to prevent rust need to be applied over the parts. The rust preventive oil with a high NVM (Non-Volatile Matter) content, high viscosity and capable of forming a thick film, possessing a high Millipore value which further increases the Millipore value of the parts. Therefore, it is recommended to use such rust preventive oils which form a thin film and have low Millipore values. Several NOX-RUST Rust Preventive Oils are based on Thin Film Technology and possess low Millipore value. Monitoring of Rust Preventive Oil for Contamination: To further control the contamination of parts, it is necessary to check the contamination present in rust preventive oils regularly. A suitable filtration system should be designed to maintain the required limits. NOX-RUST Rust Preventive Oils, Wax, Coatings, etc. are based on the CCI or Contact Corrosion Inhibition Technology have proven to be instrumental in temporary corrosion prevention and control for automotive and engineering parts. Based on the concept of polarity and thin-film technology, the Daubert proprietary polar molecules do not allow any oxidizing elements to permeate even under condensing climates and are able to survive thermal stresses beyond most other rust preventive oils. The exceptional ability of NOX-RUST to remove pre-existing moisture and light alkaline coatings from the metal surface further augments its performance. NOX-RUST offers a broad range of rust preventives which, besides corrosion of metals and its prevention, can also be selected based on needs such as water displacement properties, film thickness, upstream and downstream compatibility requirements, and many more. Similarly, Daubert’s VCI Technology is based on the concept of volatility and polarity and performs favorably even in the presence of moisture. This unique technology enables Daubert to form a complex with moisture and negate its corrosive effects. Products based on this technology are available in various forms such as rust preventive oils, packaging papers and films, emitters, and powders. Benefits with NOX-RUST® Thin Film Rust Preventive Oil: Low Millipore of parts It works as a dewatering-cum-rust preventive fluid which further cleans the part Quick separation of contamination in rust preventive oil tank No need to clean the parts before assembly Low Consumption of rust preventive oil Source Link: https://www.zavenir.com/insight/best-millipore-achievement-with-right- selection-of-rust-preventive
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-