Energ y from C entrifugal F orce Ex plained Consider a heavy mass moving in free space . A load is applied. The load is directly opposite the direction of motion of the mass. Two things will happen. 1. The mass will have an equally opposite reacti on to the load. (The mass will pull on the load ) 2. The mass will slow down. N ow consider this special case. A load is applied 90 ° to the d irection of mot ion of the weight. Two things will happen. 1. The mass will have an equally opposite reacti on to the load. (The mass will pull on the load ) 2. The mass will change direction. Notice that the mass did not slow down, it only changed direction. Of co urse, our machines a re imperfect so there is always a small amount of force from the load on the weight , bu t it is kept as small as possible. O ne of my designs. The weight is removed. Th is machine is far to small to be of any practic al use. G ravity motors vs C entrifugal force multipliers My research has conc luded that almost all the extra energy from a gravity motor co mes from centrifugal force. Gravity acts like a spring , so it hel ps the gravity motors to be self - running. A centri fugal force multiplier is much si mpler to build and less dangerous. A centrifugal force multiplier that w eights thousands of pounds can be built very easily and cheap ly. I recommend starting with a diameter of at least 10 feet and two weights of 500 pounds or more. This mechanism could be started by hand and should produce several horsepower The load will slow it down, but only about 1 - 2% of the load should be transfer red int o the weight s as energy loss The cables on the red output wheel can be moved in or out from the center for optimal performance. 12 inc hes in diameter is a good starting distance More buckets can be added . It can be modified to act li ke a v ertical windmill which will help it rotate easier in the wind.