Quick Start Stand-Alone Control Guide Menu Legend FN: Controller Functions Down/Up: Scroll Through Functions & Adjust Levels Enter: Confirm Selection P: Built-In Chase Patterns So1: Sound Detection 1 (no strobe) So2: Sound Detection 2 (with strobe) Host: Master Controller Slav: Slave Controller R: Channel 1 Brightness Level (000-255) G: Channel 2 Brightness Level (000-255) B: Channel 3 Brightness Level (000-255) U: Channel 4 Brightness Level (000-255) A: Set DMX Address (001 – 512) FAQ Q: Can I dim or control the speed of the chase patterns? A: Only through DMX control. Q: Can I dim the individual channels without selecting a chase pattern? I don’t want the channels to chase. A: You can manually control the brightness of each channel by adjusting the R, G, B & U levels. Q: Is the Host/Slave function possible without DMX control? A: Yes. Set the first controller to “HOST” and set the remaining controllers to “SLAV”. Use 3 PIN DMX Cable to connect the controllers together. The host control sends the signal to the slave controllers in the line. Q: Can I control the sound detection feature? A: No. The channels react randomly to the sound captured through the controller’s built-in microphone.