TYRE PRESSURE MONITOR - DIRECT TPMS, Active TPMS, High TPMS, Direct TPMS Parts List (5Q0 907 273B) - Wireless Receiver (5Q0 907 275B) - Pressure Sensor Special Tools None Important Notes This device does not require any sensor to receiver coding. The wireless receiver must be mounted in the rear of the car for correct sensor pickup. Fitting Exact tment is not important, the module can be hidden in the boot area for ease of installation. The correct installation area however is under the rear right of the car as photoed below. Easiest installation path is from TIUL point in the nearside (Passenger/RHD, Drivers/LHD) footwell and routing the cable towards the back under the sill panel to the boot. fi Wiring TPMS Car T4/1 - (CAN-L) T17d/p13 - (Can-L) T4/3 - (CAN-H) T17d/p12 - (Can-H) T4/2 - (Power) T17d/p15 - (SC32) T4/4 - (Earth) Earth point can be located on behind the boot liner Coding This coding list involves ABS coding. Backup your vehicle before hand! These coding instructions are from a 7.0 but veri ed to work on a 7.5. [19] Gateway -> Installation List 65 - Tire Pressure activate [19] Gateway -> Adaptation (security access 20103) {12} - Tire Pressure Monitoring coded [17] Instruments -> Longcoding Byte 4 - Bit 0 (Indirect TPMS) deactivate Byte 3 - Bit 7 (Direct TPMS) activate Byte 11 - Bit 2 (TPMS Information BAP) activate [03] - ABS -> Longcoding Byte 27 - Bit 4 (XXX0XXXX) deactivate Byte 27 - Bit 5 (XX0XXXXX) deactivate Byte 27 - Bit 6 (X0XXXXXX) deactivate Byte 28 - Bit 7 (0XXXXXXX) deactivate [5F] - Information Electronic -> Adaptation Extended {14} tire_pressure_system_0x07_msg_bus Data Bus fi
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-