TM ISOLATION GOWNS Single-Use • Level 4 For samples or more information, contact your Performance Safety Group Sales Representative at 877-774-4568 or COVID-19@PSGGEAR.com. © Copyright 2020 Performance Safety Group, Inc. Material Descriptions AAMI Level 1 to AAMI Level 4 Spunbond Polypropylene SPUNBOUND Standard, Cost-Effective and Comfortable For basic infection control, this non-woven fabric bonds fibers together to form a single layer that is appropriate only for very minimal fluid exposure. SMS Material Balanced mix of protection and comfort SPUNBOUND Strong and breathable, Spunbond/Meltblown/Spunbond (SMS) MELTBLOWN is a multi-layer fabric composed of inner layers of meltblown SPUNBOUND polypropylene sandwiched between strong, outer layers of spunbond polypropylene that is ideal for extended wear. Light/medium weight SMS is appropriate for low amounts of fluid and heavy weight SMS may be appropriate for moderate contact with fluids. Coated Polypropylene (“Poly-coated”) SPUNBOUND Balanced mix of protection and comfort POLY FILM Soft, spunbond polypropylene is coated with a layer of polyethylene (plastic) film. Polyethylene (Plastic) Film POLY FILM Basic Cover Protection A single layer of polyethylene (plastic) film provides light fluid-repelling protection at an affordable cost. Naturally low in lint and and does not meet the AAMI PB70 Standard. PerformanceSafetyGroup I 877.PSG.4568 I PSGgear.com AAMI PB70 Guidelines The Benchmark for Protection To comply with AAMI Guidelines, protective apparel must achieve minimum performance standards for strength, barrier performance and fluid resistance. Tested under controlled conditions, AAMI-rated gowns must demonstrate a 4% AQL level, which provides a high level of assurance that users are protected for the anticipated level of fluid contact. Each gown must be fully protective in the front, back and along the seams, and clearly labeled to indicate the level of protection provided, from AAMI PB70 Level 1 (lowest) to AAMI Level 4 (highest). The entire PSG portfolio of Isolation Gowns are manufactured in FDA QSR-compliant, ISO 13485 certified facilities and meet all AAMI PB70 specifications for Level 1, 2, 3 and 4 protection. Table 1: Summary of AAMI Fluid Resistance Classification (Adapted from AAMI PB70:2012) AAMI LEVEL 1 AAMI LEVEL 2 AAMI LEVEL 3 AAMI LEVEL 4 Characteristics Fluid Resistant Fluid Resistant Fluid Resistant Fluid Impermeable Commonly used as Appropriate where Used where large Minimum standard an isolation gown. more moderate amounts of fluids for isolation gowns Application Suitable for settings levels of fluid or sprays may be for minimal amounts with low amounts exposure or sprays anticipated or of spray or droplets of fluid or sprays are anticipated encountered Laminated or Single Layer Laminated or coated material Spunbond microfibres or a coated material Material (e.g. polypropylene non-woven product topically treated (e.g.impervious coated textile material polyethylene polypropylene) A higher standard Resistant to water Resistant to the of resistant to water spray and some penetration of Resistance to Fluid Minimal water spray and water resistance to water viruses based on resistance absorption on Penetration absorption on penetration of a contact compared contact surrogate microbe to Level 2 AATCC 42-2017 AATCC 42-2017 Meets requirements AATCC 42-2017: AATCC 127 Test for AATCC 127 Test for Resistance to Fluid of bacteriophage Test for spray water resistance > water resistance > Penetration test penetration ASTM resistance 20 cm hydrostatic 50 cm hydrostatic F1671 pressure pressure • AATCC 42-2017: Measures resistance of fabrics to the penetration of water by impact (AATCC, 2018) • AATCC 127-2017: Measures resistance of fabric to the penetration of water under hydrostatic pressure (AATCC, 2017) • ASTM F1670-17: Evaluate resistance of materials used in protective clothing to penetration by synthetic blood under conditions of continuous liquid contact (ASTM, 2017) • ASTM F1671-13: Measure penetration by blood-borne pathogens using a surrogate microbe under conditions of continuous liquid contact (ASTM, 2013) PerformanceSafetyGroup I 877.PSG.4568 I PSGgear.com PerformanceSafetyGroup I 877.PSG.4568 I PSGgear.com IMPERVIOUS SINGLE-USE ISOLATION GOWN LEVEL LATEX 4 CERTIFICATION Engineered from chlorinated polyethylene elastomer (CPE) material to provide protection at an affordable price • 40 gsm CPE (chlorinated polyethylene) non-woven material • Open-back for breathability to keep wearer cool and comfortable • Long sleeves, waist tie, elastic wrists and thumbhooks • Strong, heat sealed seams withstand fluids and pathogens • Thumb loop keeps gown sleeve in place under gloves • Overhead neck closure allows quick and easy donning • Meets ANSI/AAMI PB70 and AATCC 42 Level 4 standard • Item #: ISOGWCPEB4 / Universal / 1/pk, 100/cs PerformanceSafetyGroup I 877.PSG.4568 I PSGgear.com ANSI/AAMI PB70 STANDARD The Benchmark for Protection Our Isolation Gown portfolio provides barrier protection based on AAMI guidelines and helps reduce the risk of contamination and transmission of infectious organisms that lead to HAIs. PSG ANSI/AAMI PB70:2003 Level 3 and Level 4 Certified Isolation Gowns give healthcare professionals the confidence and comfort necessary to deliver the best possible patient care. PerformanceSafetyGroup I 877 I 877 PerformanceSafetyGroup .PSG.4568 .PSG.4568 I PSGgear. I PSGgear.comcom Satisfied Customers PerformanceSafetyGroup I 877.PSG.4568 I PSGgear.com Satisfied Customers PerformanceSafetyGroup I 877.PSG.4568 I PSGgear.com CONTACT US Business Name: PERFORMANCESAFETYGROUP Address: 781A Rudder Rd. St. Louis, MO 63026 Main: 636.326.4568 Government Division: 636.326.GOVT (4688) COVID-19 PPE Hotline: 877.774.4568 Fax: 636.496.7022 Toll Free Fax: 877.774.1329 Tax ID#: 81-4807855 Business Type: Limited Partnership Business Classification: Manufacturer/Distributor CAGE CODE: 5Q211 DUNS#: 849171942 NIGP CODES: 47500, 34000, 34500, 20100, 17500, 48500, 16500 NAICS CODES: 315990, 339113, 423450, 423840, 423990 SIC CODES: 2381, 3069, 3151, 3842, 5047, 5085, 5099 Government Division: GOVT@PSGgear.com COVID-19 Email: COVID-19@PSGgear.com Purchase Orders: ORDERS@PSGgear.com Website: PSG GEAR. COM ISOLATION GOWNS Single-Use • Reusable • Levels 1-4 COVID-19 SINGLE-USE SINGLE-USE FACE SHIELD FACE MASKS EXAM GLOVE INFECTION-CONTROL MEDICAL GRADE to those risking their lives to save ours: Our Healthcare Workers and First Responders. Thank You, Healthcare Heroes
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-