1 / 13 Juniper JN0-650 Exam Enterprise Routing and Switching, Professional (JNCIP-ENT) https://www.passquestion.com/jn0-650.html 35% OFF on All, Including JN0-650 Questions and Answers P ass JN0-650 Exam with PassQuestion JN0-650 questions and answers in the first attempt. https://www.passquestion.com/ 2 / 13 1.You are configuring BGP within your network and are deploying route reflectors. Which two statements are true? (Choose two.) A. The cluster ID is configured on the clients. B. The cluster ID is configured on the route reflectors. C. Routes received by a client are advertised to clients and non-clients. D. Routes received by a route reflector from a client are advertised to all IBGP peers. Answer: BD 2.Click the Exhibit button. Which well-known community needs to be used to restrict 10.0.0.0/8 from being advertised to AS 2? A. no-publish B. no-advertise C. no-export-subconfed D. no-export Answer: D 3.Referring to the exhibit 3 / 13 How will router E quickly learn that the remote MAC addresses are no longer reachable through the router attached to the failed link? A. Router E receives Type 2 withdrawal messages from router D. B. Router E receives Type 1 withdrawal messages from router D. C. Router E receives Type 1 withdrawal messages from router C. D. Router E receives Type 2 withdrawal messages from router C. Answer: B 4.Your IPv4 multicast network uses different MX Series routers for the source DR and the PIM sparse-mode RP. What is required before PIM register messages are exchanged between the DR and RP routers? A. Add an adaptive services PIC to the DR router. B. Configure PIM encapsulation on the DR and RP routers. C. Enable tunnel services on the DR and RP routers. D. Add a tunnel services PIC to the RP router. Answer: C 5.Exhibit: 4 / 13 The policy shown in the exhibit is applied as an export policy to your BGP neighborship. Which action will be taken for route 12.233.45.5? A. It will rejected by term 2. B. It will be accepted by term 1. C. It will be accepted by the default policy. D. It will be evaluated by the next policy. Answer: B 6.A customer is connected to the provider ’ s ge-0/0/0.0 interface. The provider uses ge-0/0/10.0 to forward traffic through the provider ’ s core network to other sites in the customer ’ s network. The ge-0/0/0.0 interface is configured to receive traffic tagged with a VLAN ID of 100. Referring to the exhibit, which statement is true? 5 / 13 A. The frame will be forwarded out interface ge-0/0/10 untagged. B. The frame will be forwarded out interface ge-0/0/10 with VLAN tag 200 only. C. The frame will be forwarded out interface ge-0/0/10 with VLAN tag 100 only. D. The frame will be forwarded out interface ge-0/0/10 with both VLAN tag 100 and VLAN tag 200. Answer: D 7.Which two statements are correct regarding the behavior shown in the exhibit? (Choose two.) A. The ge-1/1/0 interface is configured as secondary for Area 0. B. The router is an ABR. C. The router is not an ABR. D. The ge-1/1/0 interface is configured as secondary for Area 100. 6 / 13 Answer: BD 8.Referring to the exhibit, which two statements are true? (Choose two.) A. The IP address of this device is 10.0.1.32. B. The type of device is a physical phone. C. The device is connected to port 1 on the switch. D. The device is not a physical phone. Answer: AB 9.Which two statements are true regarding packet loss priority in CoS? (Choose two.) A. A low loss priority guarantees forwarding. B. It can be changed by a traffic policer. C. A high loss priority guarantees forwarding. D. It is assigned to a packet on ingress. Answer: BD 10.What is the primary benefit of implementing BGP multipath in a network? A. To increase the number of hops in the AS path. B. To improve network redundancy and load balancing. C. To decrease BGP convergence time. D. To simplify the BGP routing policy. Answer: B 11.You have deployed a Juniper switch that hosts multiple VLANs. 7 / 13 Which statement is true? A. To provide inter-VLAN routing, configure an IP address on the physical port that connects to the end devices. B. To provide inter-VLAN routing, configure a VLAN or IRB interface and place it within the VLAN. C. To provide inter-VLAN routing, the switch must forward traffic to a routing device over a trunk port. D. To provide inter-VLAN routing, the switch must forward traffic to a routing device over an access port within each VLAN. Answer: B 12.You are configuring MSTP to prevent loops in your layer2 network. After applying the configuration, you notice that MSTO is not working correctly Referring to the exhibit what is causing the problem? A. Too many VIANs have been defined. B. Context identifier Must be specified C. MSTI-to-VLAN mapping must be the same. D. Incorrect revision number is used Answer: C 13.You are currently using VLAN IDs 2 through 300 within your Layer 2 domain and you need to configure VSTP to prevent loops You must ensure that all VL ANs are loop free. In this scenario, which statement is correct? A. You must enable all VLANs, 2 through 300, under the VSTP configuration B. You must ensure that the VLANs are balanced between two different root bridges C. You must enable RSTP to account for all VLANs D. You must ensure that the bridge priority is set to the lowest value on all switches in the Layer 2 domain Answer: A 14.Which statement is true regarding LLDP advertisements? A. LLDP communicates VLAN information to VoIP devices B. LLDP communicates device information to neighbors C. LLDP communicates power requirements from PoE enabled devices 8 / 13 D. LLDP communicates CoS values to VoIP devices Answer: B 15.A Layer 2 connection does not expend across data centers. The IP subnet in a Layer 2 domain is confined within a single data center. Which EVPN route type is used to communicate prefixes between the data centers? A. Type 1 B. Type 2 C. Type 4 D. Type 5 Answer: D 16.A router receives a BGP route from two IBGP peers. The routes are advertised with the same path attributes. How does the router determine which peer should be installed as the forwarding next-hop? A. The router that advertised the route first will be installed. B. The router that is reachable with the shortest IGP metric will be installed. C. The router with the lowest router ID will be installed. D. Both routes will be installed and the router will load balance between them. Answer: B 17.What is the main advantage of using Anycast RP over traditional RP in a multicast network? A. It simplifies the multicast topology by eliminating the need for RP B. It provides redundancy and load-balancing for Rendezvous Point services C. It increases multicast traffic by allowing multiple sources to send simultaneously D. It restricts multicast to a specific set of sources and receivers Answer: B 18.What is the result of configuring the 'allowas-in' command in a BGP session in Junos? A. It allows routes with the local AS number in the AS_PATH to be accepted. B. It prevents the local AS number from being advertised to eBGP peers. C. It advertises the local AS in every BGP update. D. It removes the local AS number from the AS_PATH attribute. Answer: A 19.When configuring 802.1X authentication, what are three server fail fallback settings? (Choose three.) A. log B. sustain C. permit D. count E. move Answer: BCE 20.You have configured DHCP snooping on a Juniper switch. 9 / 13 Which statement is true? A. All access ports are untrusted by default. B. All ports are untrusted by default. C. All ports are trusted by default. D. All access ports are trusted by default. Answer: A 21.Which BGP message type contains NLRI information? A. notification B. keepalive C. update D. open Answer: C 22.You are asked to troubleshoot voice quality issues on your newly implement VoIP network. You notice that the voice packets are being dropped. You have verified that the packets are correctly marked for expedited forwarding queue. 10 / 13 11 / 13 Referring to the exhibit, what must you configure to solve the problem? A. You must configure a multifield classifier to put the VoIP traffic in the correct queue. B. You must configure a rewrite rule to ensure that the traffic is scheduled properly in the device. C. You must configure a scheduler to allocate bandwidth to the expedited forwarding queue. D. You must configure a policer to ensure that the queue is not being starved. Answer: C 23.You have configured a EX Series access switch to support VoIP phones. The voice VLAN has been configured to manage voice traffic. There is a computer and a VoIP phone connected to the same switch port. The VoIP phone is sending traffic with a VLAN tag. Which statement is true? A. The port facing the host and VoIP device must be configured as a trunk port. B. The port facing the host and VoIP device must be configured as an access port. C. The host must also be configured to send VLAN tagged traffic. D. The VLAN tag from the VoIP phone is discarded on the switch. Answer: B 24.In the context of Junos, what is the purpose of the 'multicast' routing-options configuration hierarchy? 12 / 13 A. To enable multicast routing protocols such as PIM or MSDP B. To specify static multicast routes C. To configure multicast rate limiting D. To define multicast boundary filters Answer: A 25.Which two statements are true regarding OSPF LSAs? (Choose two.) A. Type 1 LSAs have a link scope. B. Type 3 LSAs have an area scope. C. Type 3 LSAs have a domain scope. D. Type 1 LSAs have an area scope. Answer: BD 26.You are securing Web access in the network by using captive portal. There are some devices that must be allowed to connect that do not have interactive user interfaces. Which statement us true? A. A MAC whitelist and multiple supplicant mode can be used to allow devices based on MAC address. B. A MAC whitelist and single supplicant mode can be used to allow devices based on MAC address. C. A MAC whitelist and single-secure supplicant mode can be used to allow devices based on MAC address. D. A MAC whitelist can redirect a device to a shared VLAN that bypasses captive portal. Answer: A 27.Which command on a Junos device is used to display the operational status of PIM? A. show pim interfaces B. show pim statistics C. show pim neighbors D. show pim rp Answer: A 28.When configuring an Anycast RP, which of the following is true? A. Only one physical RP exists for each multicast group. B. Multiple RPs with the same IP address serve multicast groups. C. Anycast RP is incompatible with MSDP. D. Anycast RP does not support PIM-SM. Answer: B 29.How is MSDP used in conjunction with PIM-SM? A. To exchange multicast source information between PIM-SM domains B. To replace the need for an RP within a PIM-SM domain C. To optimize the multicast routing table size D. To enhance multicast traffic encryption Answer: A 13 / 13 30.Which two statements are true regarding the single rate tricolor token bucket algorithm? (Choose two.) A. It creates three token buckets. B. Token buckets are filled at different rates. C. Token buckets are filled at the same rate. D. It creates two token buckets. Answer: CD 31.In Junos, which command would you use to troubleshoot issues with BGP prefix advertisement? A. show route advertising-protocol bgp B. show bgp neighbor advertised-routes C. show bgp summary D. show route receive-protocol bgp Answer: B 32.What is the correct authentication processing order on EX Series switches when multiple Layer 2 authentication methods are enabled? A. MAC RADIUS ""> 802.1X ""> captive portal B. 802.1X ""> MAC RADIUS ""> captive portal C. 802.1X ""> captive portal ""> MAC RADIUS D. captive portal ""> MAC RADIUS ""> 802.1X Answer: B 33.What is the primary function of the OSPF Area Border Router (ABR)? A. To connect OSPF areas to non-OSPF networks B. To advertise external routes into the OSPF domain C. To maintain separate link-state databases for each area it serves D. To redistribute routes from other routing protocols into OSPF Answer: C 34.Which statement is true regarding the OSPF overload setting? A. It sets the metric to all interfaces to 65,535. B. It disables OSPF routing on a device. C. It limits the number of link state database entries. D. It removes the device from the link state database advertisements. Answer: A