GUARDIAN Single Filter Half Mask User instructions Preparing the Filter: Remove the filter from the bag. Remove the stoppers: Removal Instructions: > Release the straps using the buckles. > Remove the system. Guardian Half Mask Description: Cleaning Instructions: A unique design, advanced filtration system that guarantees high level comfort and safety. > On leaving the work environment and removingthe system, The system provides respiratory protection against biological plug the filter. substances and particles up to 3 microns. The system includes > Wipe clean the system externally with70% alcohol. a half mask and P3 filter that can be disinfectable. > The system can be stored in the original package for the 1 2 next use. > Efficient filtering of particles and biological substances. > Store the system in a cool, dry shaded place. > The silicon half mask has a unique design structure for full proofing while maintaining maximum comfort. Extract the black stopper from Turn the black stopper coun- On finishing use of the filter: > The system of straps for fitting guarantees that the system inside the filter. terclockwise until it is discon- will remain in place, while enabling simple adjustment to the nected from the filter. > On leaving the work environment and removing the system, shape of the face. plug the filter. Please note, keep the stoppers for cleaning and removal. > The design has been adapted for use with protective > Disconnect the filter from the mask and place it in a sealed goggles. > Sterilizable. Fitting the Mask: bag. Guardian Half Mask Contents: 3 Take out the mask. Ensure fastening straps are loose. 4 Open straps using palms, back of the hand facing outwards and fit mask. Please note, if the filter has been exposed to biological risk factors, it constitutes a risk and must be destroyed according to biological/medical waste removal instructions. Sealed Filter Half Mask Guardian Half Mask Parts: 5 Ensure contour of the mask is 6 Tighten the straps using the placed over center of the face buckles until the mask is covering the mouth and nose effectively tightened over the completely. face. Attaching the Filter: Buckles Exit Valves Starps Half Mask Filter 7 Screw open filter into mask 8 The system is ready to use. threaded socket. Ensure filter www.supergum.com is screwed in tightly. 11 Shontzino street, Tel Aviv, 67216.
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-