RUBBER FLOOR TECHNICAL SPECIFICATION * Granular rubber particles must be produced by pressing under high pressure and high temperature with special adhesives. *Rubbers 1-3mm thick truck and truck tires that have completed their recycling life It must be produced from granule * The upper edges of the rubbers will be chamfered to form joints. * The thickness of the coating material should be 2- 2.5-3 and 4 cm thick. * There should be water drainage ways at the bottom of the rubber material to provide drainage and better adhesion to the ground. * Rubber floor covering will be adhered to the concrete and screed surface prepared by the administration with special polyurethane adhesives. Approximately 1 kg of adhesive will be used for each m2. *2cm rubber m2 weight 17kg 2,5cm rubber m2 weight 22kg 3cm rubber m2 weight 26kg 4cm rubber m2 weight should be 32 kg DOUBLE COMPONENT ADHESIVE DEFINITION: Solvent-free, two-component, Polyurethane-based, multi-purpose, green, tile, yellow and beige color. Adhesive (special color on request) SCOPE OF APPLICATION : 1. In industrial rubber coatings 2. In insulation coatings. In natural stone, ceramic, granite marble and decorative bricks 4. PVC floor tile coverings, chipboard, chipboard 5. Styrofoam, polystyrene sheet, acoustic sound insulation 6. Bonding of concrete, glass, metals and different products It is used indoors and outdoors, in ship boat construction. PRODUCT ADVANTAGES: a. Solvent free adhesive b. It has high bonding strength. c. It is resistant to water, humidity and heat. D. Adhesion of non-absorbent surfaces (example: steel metal) glass, marble, ceramic, plastic bonding on the surface) gives good results. to. The product does not decompose. f. No press required. g. -20 C is applicable. TECHNICAL SPECIFICATIONS : COLOR: BEIGE, YELLOW, TILE AND GREEN (special color upon request) Density: 1.45 +- 0.1 kg. /lt. Mixing Ratio: 6 or 1 part Usage time: 20-30 min. (Depends on air temperature and humidity.) Usage amount: 800-1200 gr. / m2 Drying time: After 4 - 5 hours Mechanical durability : after 12 hours Chemical resistance: after 5 days RUBBER FLOOR TECHNICAL SPECIFICATION Granular rubber particles must be produced by pressing under high pressure and high temperature with special adhesives. *Rubbers 1-3mm thick, of truck and truck tires that have completed their recycling life It must be produced from granule * The upper edges of the rubbers will be chamfered to form joints. * The thickness of the coating material should be 2- 2.5-3 and 4 cm thick. * There should be water drainage ways at the bottom of the rubber material in order to provide drainage and better adhesion to the ground. * Rubber floor covering will be adhered to the concrete and screed surface prepared by the administration with special polyurethane adhesives. Approximately 1 kg of adhesive will be used for each m2. *2cm rubber m2 weight 17kg 2,5cm rubber m2 weight 22kg 3cm rubber m2 weight 26kg 4cm rubber m2 weight should be 32 kg DOUBLE COMPONENT ADHESIVE DEFINITION: Solvent-free, two-component, Polyurethane-based, multi-purpose, green, tile, yellow and beige color. Adhesive (special color on request) SCOPE OF APPLICATION : 1. In industrial rubber coatings 2. In insulation coatings. In natural stone, ceramic, granite marble and decorative bricks 4. PVC floor tile coverings, chipboard, chipboard 5. Styrofoam, polystyrene sheet, acoustic sound insulation 6. Bonding of concrete, glass, metals and different products It is used indoors and outdoors, in ship boat construction. PRODUCT ADVANTAGES: a. Solvent free adhesive b. It has high bonding strength. c. It is resistant to water, humidity and heat. D. Adhesion of non-absorbent surfaces (example: steel metal) bonding glass, marble, ceramic, plastic on the surface) gives good results. to. The product does not decompose. f. No press required. g. -20 C is applicable. TECHNICAL SPECIFICATIONS: COLOR: BEIGE, YELLOW, TILE AND GREEN (special color upon request) Density: 1.45 +- 0.1 kg. /lt. Mixing Ratio: 6 or 1 part Usage time: 20-30 min. (Depends on air temperature and humidity.) Usage amount: 800-1200 gr. / m2 Drying time: After 4 - 5 hours Mechanical durability : after 12 hours Chemical resistance: after 5 days