ADJUST BURNER VENT TO CENTER SCREW HOLE REGULATOR WILL NOT SCREW IN COMPLETELY AS SHOWN WITH REGULATOR OFF, SLIGHT MOVE BURNER AWAY FROM THE POST SO ACCESS TO THE SCREWS ARE ALLOWED AS SHOWN THE VENT IS OFF CENTER BLOCKING ONE SIDE OF THE THREADS AS SHOWN AND WILL NEED TO BE CENTERED. USING A PHILLIPS HEAD SCREWDRIVER, SLIGHT LOOSEN BOTH SCREWS CENTER THE VENT SO THE HOLE IS CENTERED AS SHOWN AND THE THREADS ARE ACCESSIBLE FROM ALL SIDES AS SHOWN THEN TIGHTEN BOTH SCREWS PUSH THE BURNER BACK INTO PLACE SO THE BURNERS LINES UP WITH THE POST AND SCREW IN THE REGULATOR TIGHT
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-