PRODUCT CATALOG CONTENT WATERPROOFING ROOFING Lanko K10 Dampflex 5 Sikalastic®-614 20 Lanko K11 Matryx 5 Sikalastic®-618 20 SikaTop®-105 Seal QA 5 Sikalastic®-625 21 SikaTop®-107 Seal QA 5 Sikalastic®-641 21 SikaLastic®-152 QA 6 Sikalastic®-701 21 Sika MonoTop®-108 Water Plug QA 6 Sikalastic®-708 UV 21 Sikadur®-52 (AB) CN 6 Sikalastic®-709 22 Sika Injection®-101 RC 6 Sikalastic®-835i 22 Sika Injection®-201 CE 7 Sikalastic®-833 R - ALU 22 Sika Injection® -107 KA10 7 Sikalastic®-851 R 23 Sika Injection®-306 Set 7 Sikalastic®-852 R 23 Sika Injection® -310 7 Sikalastic®-708 UV 23 Sika Igolflex®-100 QA 8 Sikalastic®-859 R 23 Sika Igolflex®-160 QA 8 Sikalastic®-560 24 Sika Igolflex®-165 QA 8 Sikalastic®-505 24 Sika Igolflex®-550 QA 8 Sarnafil® TG 66 24 SikaBit® P-13 QA 9 Sarnafil® TS 77 24 SikaBit® S-515 9 Sarnafil® S 327 25 SikaBit® E-15-15 HDPE XL SA 9 Sarnafil® TG 76 Felt 25 Sika Waterbar® V-25 9 Sarnafil® G 410 L Felt 25 Sika Waterbar® AR-25 9 Sarnafil® G 410 L 25 Sika Waterbar® A-32 10 Sarnafil® G 410-18 EL Felt 26 Sika Waterbar® AR-20 10 Sikaplan® TB 26 Sika Waterbar® AR-31 10 Sikaplan® TM 26 Sika Waterbar® DR-32 10 Sika® Reemat Premium 26 Sika Waterbar® O-25 10 Sika® Joint Tape SA 26 Sika Waterbar® O-32 11 SikaSwell® S-2 SikaSwell® A-2010 Rot 11 11 BUILDING FINISHES Sika Dilatec® BE-300 11 Sika Dilatec® BR-500 11 Sikaceram®-117 QA 28 Sika Dilatec® E-220 12 Sikaceram®-118 QA 28 SikaDilatec® ER-350 12 Sikaceram®-550 Silent 28 Sikadur-Combiflex® SG-20 P200 12 Lanko TileBond 28 Sikadur-Combiflex® SG-20 P250 12 Lanko TTB 28 Sikadur-Combiflex® SG-20 P300 13 Lanko TTB+ 29 Sikadur-Combiflex® SG-20 P400 13 Lanko Sac 28 29 SikaFuko® Eco-1 13 Lanko Sac 28+ 29 SikaFuko® VT1 Combipack 13 Lanko Floorbond 29 Sikalastic® Metal Primer 14 Lanko Colorgrout 29 Sikalastic®-8850 14 Lanko Colorgrout+ 30 Sikalastic®-851 (A,B) 14 Lanko-572 30 Sikalastic®-8800 (A,B) 14 Lanko EA 30 Sikaplan® WP 1100-30 HL/22 HL/20 HL/15 15 Lanko EG 30 HL Lanko PRC 1 30 Sikaplan® WP 1100-20 HLE 15 Lanko PRC 2 31 Sikaproof® A-08 HC 16 Lanko PP-1 31 Sikaproof® A-12 HC 16 Lanko TB-F 31 Sikaproof® A+ 12 17 Lanko TB-F+ 31 SikaProof® Tape A + 17 Lanko Granatech 31 Sikaproof® Tape-150 A 17 Lanko FBC 32 Lanko Monodecor GT 32 ROOFING Lanko Ceramic Coating Lanko PCK 32 32 Lanko Magic Grantie 33 SikaRoof® MTC-12 19 Lanko Stony Coating 33 SikaRoof® MTC-15 19 Parexal 33 SikaRoof® MTC-18 19 SikaRoof® MTC-22 19 Sikalastic® 590 20 Sikalastic®-612 20 2 REFURBISHMENT CONCRETE Sika AnchorFix®- 1 N 35 Sika® Separol®-300 QA 51 SikaTop® Armatec®-110 35 Sika® Separol® FP-15 51 EpoCem® Sika® Antisol®-200 QA 51 Sika AnchorFix®-2+ Tropical 35 Sika® Antisol® -250 WP 51 Sika Anchorfix®-3001 36 Lanko K11 CWA 52 Sikadur®-32 Normal 36 SikaIntraplast® -Z 52 SikaLatex®-100 P QA 36 SikaFibre® 12-34 52 Sikagrout®-214 QA 37 SikaFibre® Force PP-65 52 Lanko NSG 37 Sikagrout®-114 QA Sikadur®-42 MP Slow QA 37 37 FLOORING Sika Monotop®-612 QA 38 Sika Monotop®-625 Fine QA 38 Sikafloor®-161 QA 54 Lanko Skimcoat 113 38 Sikafloor®-161 54 Lanko 731 38 Sikafloor® -264 SG 54 Lanko Skim 110 38 Sikafloor® -359 N 54 Sikacrete®-113 PP QA 39 Sikafloor® -3240 54 Sikacrete®-114 QA 39 Sikagard®-62 55 Sikadur®-31 CF Slow/Normal 39 Sikadur® Aggregates QA 55 Sikagard®-700 S QA 40 Sikafloor®-20 PurCem® 55 Sikagard®-705 L 40 Sikafloor®-21 N PurCem® (CN) 55 Sikagard®-720 Epocem 40 Lanko Floor Screed 56 Sika Intraplast® CFG 41 Lanko 123 56 Sika Anchorfix® -3030 41 Lanko 162 56 Lanko 101 41 Lanko 173 56 Lanko CG 60 41 Lanko 243 56 Sika® FerroGard®-903 42 Sikagard® WallCoat N QA 57 Sika® Galvashield® XP 42 SikaDecor®-801 Nature 57 Sika® Galvashield® XPT 42 SikaDecor®-803 Nature 57 Sika® Galvashield® XP2 42 Sikafloor®-304 W 57 Sika® Galvashield® XP4 42 Sikafloor®-330 57 Sika® Galvashield® Embedding Mortar 43 Sikafloor®-305 W ESD 58 Sika® Galvashield® CC 43 Sikafloor®-305 W 58 Sika® Galvashield® T2 43 Sika® DecoQuartz 58 Sika® Galvanode® DAS 44 Sikafloor®-169 58 Sikagard®-790 44 Sikafloor® Comort Regupol-4580 59 Lanko 238 Hydroresist 44 Sikafloor® Comfort Porefiller 59 Sikafloor® Comfort Adhesive 59 SEALING & BONDING Sikafloor® Comfort Regupol-6015 H 59 Sikafloor® Conductive Set 59 Sikafloor® MultiDur ES-44 ESD 59 Sikasil® SG-18 46 Sikafloor® PS 60 SikaHyflex® 305 EU 46 Sika® PU Quartz 60 Sikaflex® Construction+ 46 Sikafloor® DecoDur EM-21 Compact 60 Sikaflex®-11 FC+ 46 Sikafloor®-2530 W LP 60 Sikaflex® Pro-3 46 SikaTop®-10 60 Sikaflex® PRO-3 SL 47 Sikafloor®-154 W 61 Sikaflex®-118 Extreme Grab 47 Sikafloor®-2100 61 Sikaflex®-111 Stick & Seal 47 Sikadur®-504 61 Sikaflex®-112 Crystal Clear 47 Sikafloor® CureHard-24 61 SikaBond®-115 Strong Fix 48 Sikafloor®-1 MetalTop 62 Sikasil® Universal 48 Sika® Extender T 62 Sika Sanisil® 48 Sikafloor®-2040 62 Sika® Aktivator®-205 48 Sikafloor®-381 62 SikaPrimer®-3 N 49 SikaCor® EG-5 62 SikaPrimer®-210 49 SikaCor® Zinc R 63 Sikasil® WS-305 S 49 SikaCor® EG-120 63 Sikacryl®-621 Fire 49 Sika® Permacor®-2230 VHS 63 Sikacryl®-110 49 Sikaflex®-428 Precast 49 3 WATERPROOFING SOLUTIONS 4 Lanko K10 Dampflex USE CHARACTERISTICS PACKAGING: ́ Provides a seamless waterproofing system ́ Ready-to-use, ease of application 20 kg container which is ideal for use in shower recess prior ́ Fast dry to tiling. ́ Extremely flexible, high elongation, absorb ́ Can also be used to waterproof terraces vibration and balconies. ́ Water based, non-toxic, non-flammable ́ Bond to various substrates, e.g. concrete, ́ Bonds to various substrates render, existing tile, gypsum, metal/wood- en surfaces, fiber ce¬ment/particle boards. Lanko K11 Matryx USE CHARACTERISTICS Recommended for interior and exterior below ́ Single component and easy to apply. grade surfaces. LANKO K11 Matryx gives ́ Can be used for positive or negative water- protection against concrete decay and water- proofing of concrete structure. PACKAGING: 25 kg bag borne corrosive salts. ́ Protection against rising dampness on Can be used for negative waterproofing of ground slab. concrete structure and on horizontal structural slabs against hy¬drostatic pressure as it provides strong resistance to impact and abrasion. SikaTop® -105 Seal QA USE CHARACTERISTICS PACKAGING: SikaTop®-105 Seal QA is used for:- ́ Easy to apply by brush or in thin trowel 25 kg set (5 kg pail Part ́ Interior and exterior waterproofing and applications A + 20 kg bag Part B damp-proofing of concrete, cementitious ́ No water required rendering, brickwork and blockwork ́ Pre-batched components ́ Protection of concrete structures against ́ Hand or spray applied the effects of de-icing salts and freeze ́ Easy and fast mixing thaw attack ́ Very good adhesion ́ Rigid waterproofing of basement walls in ́ Protects concrete against carbonation new construction and refurbishment ́ Protects against water penetration ́ Pore / blowhole filling ́ Non-corrosive to steel or iron ́ Waterproofing basement and cellars ́ Over-paintable ́ Sealing fine “hairline” cracks in concrete ́ Approved for potable water contact structures (not subject to movement) ́ Levelling mortar for concrete repair works. SikaTop®-105 Seal QA can be used for concrete protection. In particular it is: ́ Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9) ́ Suitable for moisture control (Principle 2, method 2.2 of EN 1504-9) ́ Suitable for increasing the resistivity (Prin- ciple 8, method 8.2 of EN 1504-9) SikaTop® -107 Seal QA USE CHARACTERISTICS PACKAGING: ́ Rigid waterproofing of basement walls in ́ Easy to apply by brush or in thin trowel 25 kg set (5 kg pail Part applications A + 20 kg bag Part B) new construction and refurbishment ́ Concrete surface protection, to improve the ́ No water required durability ́ Pre-batched components ́ Waterproofing and protection of hydraulic ́ Hand or spray applied structures such as: basins, tanks, concret ́ Easy and fast mixing piping, bridges, canals ́ Very good adhesion ́ Protective coating for reinforced concrete ́ Protects concrete against carbonation structures ́ Protects against water penetration ́ Waterproofing of terraces, balconies and wet areas underneath protection screed and tiles 5 SikaLastic®-152 QA USE CHARACTERISTICS PACKAGING: ́ Flexible waterproofing and protection of ́ Flexible waterproofing and concrete protection Ready batched 33 kg hydraulic structures such as basins, tanks, in one product units: concrete piping, bridges and canals ́ Very good crack-bridging abilities, also at low Comp. A 8 kg ́ Waterproofing of bathrooms, shower, temperature Comp. B 25 kg terraces, balconies, swimming pools before ́ Resistance against de-icing salts and carbon Grey the application of ceramic tiles bonded dioxide with adhesives ́ Reliable application also in very humid ́ Waterproofing and protection of outer environment walls to be buried into the ground ́ All components ready delivered, no additional ́ Inside waterproofing of light counter mixing water required pressure water of walls and floors in ́ Applicable also on lightly humid subgrades basements ́ Excellent adhesion onto lots of substrates ́ Protective, anti-carbonation coating of such as concrete, cement mortars, stone, concrete surfaces masonry Sika MonoTop®-108 Water Plug QA USE CHARACTERISTICS PACKAGING: ́ Ready-to-mix powder. ́ Water tanks, reservoirs, gutters. 15 kg container. ́ Fast-setting. ́ Toilet, swimming pools. ́ Can be used underwater. ́ Underground structures. ́ Non-toxic. ́ Floor-wall joints. ́ High resistance to pressure. ́ Sealing of injectors and drain ́ Suitable for contact with potable water. Sikadur®-52 (AB) CN USE CHARACTERISTICS PACKAGING: As an injection resin with good adhesion ́ Solvent-free 15 kg container. to concrete, mortar, stone, steel and wood. ́ Sharkage free hardening Sikadur®-52 CN is used to fill and seal voids ́ High mechanical and adhesive strengths COLOR: and cracks in structures such as bridges and ́ Hard but not brittle Component A: Trans- parent other civil engineering buildings, industrial and ́ Low viscosity Component B: residential buildings, e.g. columns, beams, ́ In Injectable with single component pumps Brownish foundations, walls, floors and water retain- Components A + ing structures. It not only forms an effective B mixed: Yellow- barrier against water infiltration and corrosion ish-brownish promoting media, but it also structurally bonds the concrete sections together. Sika Injection®-101 RC USE CHARACTERISTICS PACKAGING: ́ Sika® Injection-101 RC may only be used by ́ No reaction takes place unless it is in direct Part A 10 or 20 kg experienced professionals. contact with water. Part B 12.5 or 25 kg ́ Sika® Injection-101 RC is used for the ́ Sika® Injection-101 RC can be injected as a temporary water stopping of high-water single component system. intrusions in cracks, joints and cavities in ́ The free foaming expansion in contact with concrete, brickwork and natural stone- water is up to 40 times. work. ́ The reaction speed (foam formation) is in- ́ To achieve permanent watertight crack fluenced by the temperatures of the mixed sealing, Sika® Injection-201 CE should be material, the structure and the contact injected subsequently water, plus the hydrodynamic conditions. 6 Sika Injection®-201 CE USE CHARACTERISTICS PACKAGING: ́ Sika® Injection-201 CE may only be used by ́ Permanently elastic, can absorb limited Part A 10 kg, 20 kg experienced professionals. movements Colourless ́ Sika® Injection-201 CE is used for per- ́ No shrinkage in subsequent dry conditions Part B 10.6 kg, 21.2 kg manent watertight sealing with some flex- ́ Due to its low viscosity it can penetrate into Brown ibility to absorb limited movement, in dry, cracks >0.2 mm in width damp or water-bearing cracks and joints in ́ Cured Sika® Injection-201 CE is inert and concrete, brickwork and natural stone chemically resistant ́ Sika® Injection-201 CE can be used for the ́ Solvent-free injection of the SikaFuko®-System (non ́ Can be injected as a one component system re-injectable!) ́ For use in water-bearing cracks under hydrostatic pressure, preliminary injection shall be made with Sika® Injection-101 RC. Sika Injection® -107 KA10 USE CHARACTERISTICS PACKAGING: ́ Sika® Injection-107 may only be used by ́ Permanently elastic, can absorb limited Available in metal experienced professionals. movements. containers of: ́ Sika® Injection-107 is used for permanent ́ Durable sealing of water-bearing cracks and 5.3 kg watertight sealing with some flexibility to voids of > 0.3mm. 10.6 kg absorb limited movement, in water-bear- ́ Moisture-reactive, one-component polyure- ing cracks and joints in concrete, brickwork thane resin – water contact is required for the and natural stone structures. foaming reaction and curing to a permanently flexible sealing compound. Sika Injection®-306 Set USE CHARACTERISTICS PACKAGING: ́ Sika® Injection-306 may only be used by ́ Adjustable curing time between 8 and 50 Component A (Resin) 2 × experienced professionals. minutes 8.0 kg ́ Sika® Injection-306 is used for the repair ́ Permanently elastic, can absorb limited Accelerator 1 × 1.0 kg by injection of damaged waterproofing movements Hardener powder 4 × 40 g membranes (single and double layer ́ Capable of reversibly absorbing (swelling) and Measuring cup 1 piece system). releasing (shrinking) moisture Additional Accelerator 4 x 1 ́ Sika® Injection-306 is used as a post- ́ Solvent free acrylic resin kg used for faster reaction ́ High pH-value of 9 to 10 times construction, external injection sealing system for construction and limited ́ Very low viscosity comparable to that of water movement expansion or drainage pipe ́ Cured Sika® Injection-306 is insoluble in water joints, that are, or will be, covered with and hydrocarbons and resistant to acids and damp or water saturated soil. alkalis ́ Sika® Injection-306 is used for the injection ́ Can be used in ground water protection zones of SikaFuko® injection hoses to seal construction joints. ́ Sika® Injection-306 can be used to seal water-bearing cracks and voids. ́ Sika® Injection-306 can be used for making new sealing walls (curtains) in damp or water saturated ground conditions, situated in close proximity to the building component or within the building structure. Sika Injection® -310 USE CHARACTERISTICS PACKAGING: Sika® Injection-310 may only be used by expe- ́ 1-part, all in one product Pail 4 × 5 kg sealed bags in rienced professionals. ́ Activation by just adding water 30 litre container Repair by injection of damaged waterproofing ́ Easy to mix compared to multicomponent 18 containers on pallet membranes (single and double layer system) resins (360 kg) ́ Easy to apply with 1-component pump Sealing of construction joints via injection ́ Very low viscosity Box hoses, i.e. SikaFuko® System ́ Equipment easy to clean, only water 5 × 5 kg in box 24 boxes on pallet Injection of construction and movement required (600 kg) expansion joints ́ When cured, insoluble in water and hydro- carbons 7 Sika Igolflex®-100 QA USE CHARACTERISTICS PACKAGING: ́ Concrete foundation which are above the ́ VOC free 200 kg drums water table ́ No health or environmental hazard ́ Block works ́ Odorless and safe to apply in poorly ventilated ́ Building facades prior to cladding or confined areas ́ Easy to apply. Cold applied. No additional heating is required ́ Good resistance to soil chemicals like chlorides and sulfates ́ Good adhesion on most substrates ́ Non flammable Sika Igolflex®-160 QA USE CHARACTERISTICS PACKAGING: ́ Tanking and waterproofing of substructures ́ High rubber content - 10 % 180 kg drums to provide an impervious membrane ́ Excellent adhesion to most building substrates ́ Vapour barrier of cladded walls ́ Reduced chloride penetration ́ Maintenance of many roof types including ́ Can be applied on damp substrates asphalt-felt roofs, concrete, cement, light- ́ Non sagging weight screeds, timber etc. ́ Single component ́ As an adhesive for bonding insulation ́ Water based boards, expanded polystyrene, cork tiles etc. ́ Economical, easy to apply, reduces labour cost ́ Damp proof membrane for roofs and floor ́ Can be applied on vertical and horizontal areas slabs ́ Impermeable to water ́ Efficient curing membrane to freshly laid ́ Elastic, seamless, joint free concrete ́ Unaffected by high ambient temperature ́ Basements, retaining walls ́ Resistant to aggressive soils and contaminated ground water ́ Low odour, dries without generating strong vapour Sika Igolflex®-165 QA USE CHARACTERISTICS PACKAGING: ́ Bathrooms, showers, kitchens and other ́ Durable, elastic and joint free coating 200 kg drums wet areas ́ VOC free and non-flammable ́ For water tanks, general waterproof- ́ No health or environmental hazard ing, vapor barrier and damp proofing of ́ Odorless, safe to apply in poorly ventilated or concrete structures, roofs, walls, decks and floors confined areas ́ Water proofing of concrete substructures ́ Easy to apply. Cold applied. No additional heat- and block works ing is required ́ Water proofing basements and retaining ́ Highly thixotropic and high viscosity walls ́ Can be applied at high thickness on vertical ́ Damp proofing and vapor barrier for build- ing facades prior to cladding surface without any sag or flow ́ Maintenance of concrete, cement, metal ́ Good resistant to soil chemicals like chlorides or wooden roofs and sulfates ́ Maintenance of existing built up roof ́ Good adhesion on most substrates waterproofing ́ Adhesive for polystyrene insulation boards, wood mosaic or tiles Sika Igolflex®-550 QA USE CHARACTERISTICS PACKAGING: ́ Water proofing of concrete substructures ́ VOC free 200 kg drums and block works ́ No health or environmental hazard ́ Water proofing basements and retaining ́ Odorless and safe to apply in poorly ventilated walls or confined areas ́ Damp proofing and vapor barrier for build- ́ Easy to apply. Cold applied. No additional ing facades prior to cladding heating is required ́ Maintenance of concrete, cement, metal or ́ Highly thixotropic/in paste form wooden roofs ́ Can be applied at high thickness on vertical ́ For water tanks, general waterproofing, surface without any sag or flow vapor barrier and damp proofing of concrete ́ Good resistance to soil chemicals like chlorides structures like basements, roofs, walls, and sulfates decks and floors ́ Good adhesion on most substrates ́ Maintenance of existing built up roof ́ Non-flammable waterproofing ́ Adhesive for polystyrene insulation boards, wood mosaic or tiles 8 SikaBit® P-13 QA USE CHARACTERISTICS PACKAGING: ́ SikaBit® P-13 QA is used as a primer for ́ High adhesion and bonding ability on various 200 L drums SikaBit® membranes to increase adhesion substrates and bond to the substrate. ́ Good binding ability for dust and loose particles ́ Ready to use by brush, roller or spray SikaBit® S-515 USE CHARACTERISTICS PACKAGING: 1.00 x 20 m single roll SikaBit® S-515 is a cold and post-applied ́ Cold-applied and self-adhesive (no heating packed in a cardboard self-adhesive sheet waterproofing mem- or open flames required) box, 33 kg/roll brane. The system is applied on existing ́ Fully bonded sheets with self-sealing below ground concrete structures to provide abilities damp-proofing and waterproofing: ́ Resistant to aggressive mediums in natural ́ On horizontal slabs and protrusions ground water and soil ́ On single and strip foundations or slabs ́ Provides Radon and Methane gas barrier ́ On the outside of external walls ́ Controlled layer thickness ́ On concrete roof decks ́ Easy, fast and secure application, without special equipment ́ Temporarily UV-/weather resistant (during limited construction periods) SikaBit® E-15-15 HDPE XL SA USE CHARACTERISTICS PACKAGING: ́ Cold-applied and self-adhesive (no heating 1.05 m x 15 m single roll SikaBit® E 15-15 HDPE XL SA is a cold and post-applied self-adhesive sheet waterproof- or open flames required) ing membrane. The system is applied on ́ Fully bonded sheets existing below ground concrete structures to ́ Resistant to aggressive mediums in natural provide damp-proofing and waterproofing: ground water and soil ́ Controlled layer thickness ́ On horizontal slabs and protrusions ́ Easy, fast and secure application, without ́ On single and strip foundations or slabs special equipment ́ On the outside of external walls ́ Split release liner for easy application Sika Waterbar® V-25 USE CHARACTERISTICS PACKAGING: For the effective sealing of concrete construc- ́ Sealing starts as soon as the concrete has 20 m rolls tion and expansion joints in structures such hardened as: ́ Multi rib profile provides impenetrable barriers to water migration ́ Basements ́ Can be easily site welded - (welding knife is ́ Water reservoirs available) ́ Sewage treatment plants ́ Good chemical resistance ́ Swimming pools ́ Available various kind of profiles for all type of ́ Retaining walls application ́ Lift shafts ́ Tunnels, culverts ́ Service pits Sika Waterbar® AR-25 USE CHARACTERISTICS PACKAGING: For the effective sealing of concrete construc- ́ Sealing starts as soon as the concrete has 20 m rolls tion and expansion joints in structures such as: hardened ́ Multi rib profile provides impenetrable barriers ́ Basements to water migration ́ Water reservoirs ́ Can be easily site welded - (welding knife is ́ Sewage treatment plants available) ́ Swimming pools ́ Good chemical resistance ́ Retaining walls ́ Available various kind of profiles for all type of ́ Lift shafts application ́ Tunnels, culverts ́ Service pits 9 Sika Waterbar® A-32 USE CHARACTERISTICS PACKAGING: ́ Watertight joint sealing of construction ́ High tensile strength and elongation Standard rolls of 15 m joints in new concrete structures. Typical ́ Permanent flexibility length packed on Euro ́ Suitable for low to medium levels of hydro- or disposable pallets structures include: static water pressure Factory produced, ́ Residential building basements ́ Resistant to all-natural mediums in soil and pre-fabricated Sika® ́ Commercial building basements Waterbar water-stop- ́ Underground car parks groundwater ping systems are sup- ́ Water retaining structures and water ́ Resistant to a broad spectrum of chemicals plied in coils, on Euro treatment plants ́ Robust products designed for handling and or disposable pallets installation on site dependent ́ Suitable for thermal welding in shop and on on their size site Sika Waterbar® AR-20 USE CHARACTERISTICS PACKAGING: Sika® Waterbars are used to waterproof ́ High quality PVC for long durability 10 m rolls construction and expansion joints in concrete ́ Suitable for high water pressure 15 m rolls ́ Easy to weld on site 30 m rolls structures such as those in water retain- ́ Many different sizes and types available, (Depends on type and ing structures including reservoirs, canals, depending on their use size) sewage plants, dams, swimming pools etc. Plus those in the watertight construction of many buildings and structures including large basements, underground car parks, subways and sea walls etc. Sika Waterbar® AR-31 USE CHARACTERISTICS PACKAGING: ́ Sika® Waterbars are used to waterproof ́ High quality PVC for long durability 10 m rolls construction and expansion joints in ́ Suitable for high water pressure 15 m rolls concrete structures such as those in water ́ Easy to weld on site 30 m rolls retaining structures including reservoirs, ́ Many different sizes and types available, (Depends on type and size) canals, sewage plants, dams, swimming depending on their use pools etc. Plus those in the watertight ́ construction of many buildings and structures including large basements, underground car parks, subways and sea walls etc Sika Waterbar® DR-32 USE CHARACTERISTICS PACKAGING: ́ High quality PVC for long durability 10 m rolls Sika® Waterbars are used to waterproof ́ Suitable for high water pressure 15 m rolls construction and expansion joints in concrete ́ Easy to weld on site 30 m rolls structures such as those in water retaining (Depends on type and structures including reservoirs, canals, sewage ́ Many different sizes and types available, size) plants, dams, swimming pools etc. Plus those depending on their use in the watertight construction of many build- ings and structures including large basements, underground car parks, subways and sea walls etc. Sika Waterbar® O-25 USE CHARACTERISTICS PACKAGING: ́ High quality PVC for long durability 15 m rolls Sika®-Waterbars* are used to seal construc- tion and expansion joints in water retaining ́ Suitable for high water pressure structures such as reservoirs, water towers, ́ Easy to weld on site dams, spillways, canals, swimming pools ́ Many different sizes and types available, sewage tanks etc. as well as to keep water depending on their use out of concrete structures such as basements, underground car parks, tunnels, subways, retaining walls etc. 10 Sika Waterbar® O-32 USE CHARACTERISTICS PACKAGING: Sika®-Waterbars are used to waterproof ́ High quality PVC for long durability 10 m rolls construction and expansion joints in concrete ́ Suitable for high water pressure 15 m rolls structures such as those in water retain- ́ Easy to weld on site 30 m rolls ing structures including reservoirs, canals, ́ Many different sizes and types available, (Depends on type and depending on their use size) sewage plants, dams, swimming pools etc. Plus those in the watertight construction of many buildings and structures including large basements, underground car parks, subways and sea walls etc. SikaSwell® S-2 USE CHARACTERISTICS PACKAGING: Sealing: ́ Easy to apply 600 ml unipacs 20 ́ Good adhesion to various substrates unipacs/box, 48 boxes/ ́ Construction joints pallet ́ Optimized expansion rate, therefore no dam- ́ Pipe and steel work penetrations through 300 ml cartridges 12 age to fresh concrete during curing walls and floor slabs cartridges/box, 112 ́ Highly economical ́ Around all types of penetrations and con- boxes/pallet ́ Swells in contact with water struction joints ́ Permanently water resistant ́ Construction joints in cable ducts, etc. COLOR: ́ Adaptable to fit many different types of ́ Fixing / Adhering swellable profiles: Oxide Red detailing ́ SikaFuko® Swell 1 Injection hoses ́ SikaSwell®-A Profiles ́ SikaSwell®-P Profiles SikaSwell® A-2010 Rot USE CHARACTERISTICS PACKAGING: To seal: ́ Easy to apply Roll of 10 m ́ Can be applied on different substrates Box with 1 or 6 rolls ́ Construction joints ́ Highly economical ́ Pipe and steel work penetrations through ́ Swells in contact with water walls and floor slabs ́ Can swell into cracks and gaps ́ Construction joints in cable ducts, etc. ́ Long-term reliability tested ́ Around all types of penetrations through ́ Resistant against water and various chemical concrete substances ́ No hardening time required ́ No welding required ́ Adaptable to fit many different detailing tasks ́ Different types and dimensions available Sika Dilatec® BE-300 USE CHARACTERISTICS PACKAGING: End tape for bituminous waterproofing on ́ Durable water and weather resistance Thickness 1.6 mm concrete and metals. Sealed on one side with ́ High movement absorption Width 300 mm hot bitumen between polymer bitumen wa- ́ Root resistant Roll length 30 m terproofing membranes (B-edge) and bonded ́ Resistant to many chemicals on the other side with Sikadur®- Combiflex® ́ UV resistant CF Adhesive or Sikadur®-31 CF Slow (E-edge). ́ Suitable for use and service over a wide tem- perature range ́ Can be hot air welded Sika Dilatec® BR-500 USE CHARACTERISTICS PACKAGING: End tape for bituminous waterproofing and ́ Durable water and weather resistance Thickness 1.6 mm jointing tape between PVC waterproofing ́ High movement absorption Width 500 mm membranes and bituminous waterproofing. ́ Root resistant Roll length 30 m ́ Resistant to many chemicals Sealed on one side with hot bitumen between ́ UV resistant two layers of polymer modified bitumen ́ Suitable for use and service over a wide tem- membrane (B-edge) and welded on the other perature range side to the PVC waterproofing membrane ́ Can be hot air welded (R-edge). 11 Sika Dilatec® E-220 USE CHARACTERISTICS PACKAGING: Sealing tape for construction and movement ́ Durable water and weather resistance Thickness 1.6 mm joints in concrete and metals. ́ High movement absorption Width 220 mm ́ Root resistant Roll length 30 m Bonded on both sides with Sikadur®-Com- ́ Resistant to many chemicals biflex® CF Adhesive or Sikadur®-31 CF Slow ́ UV resistant (E-edges). ́ Suitable for use and service over a wide temperature range ́ Can be hot air welded SikaDilatec® ER-350 USE CHARACTERISTICS PACKAGING: ́ Durable water and weather resistance 10 m rolls End tape for PVC waterproofing membranes ́ High movement absorption 15 m rolls on concrete and metals. ́ Root resistant 30 m rolls Bonded on one side with Sikadur®-Combiflex® (Depends on type and ́ Resistant to many chemicals CF Adhesive or Sikadur®-31 CF Slow (E-edge) size) ́ UV resistant and welded on the other side to the PVC ́ Suitable for use and service over a wide waterproofing membrane (R-edge). temperature range ́ Can be hot air welded Sikadur-Combiflex® SG-20 P200 CHARACTERISTICS CHARACTERISTICS PACKAGING: Sealing all types of joints and cracks in many ́ Advanced adhesion, no activation on site 15 m rolls different structures and applications including: required ́ Tunnels and culverts ́ Hydroelectric power plants ́ Highly flexible - high crack and joint bridging ́ Sewage treatment plants ability ́ Basements ́ Good chemical resistance ́ Water retaining structures ́ Weathering and UV-resistant ́ Drinking water reservoirs ́ Root penetration resistant Sealing of: ́ Performs well within a wide range of ́ Movement joints ́ Construction joints temperatures ́ Pipe penetrations ́ Plasticiser-free ́ Cracks ́ Hot air weldable Building components where differential settle- ́ Can be used in contact with potable/drinking water ment is expected Sikadur-Combiflex® SG-20 P250 CHARACTERISTICS CHARACTERISTICS PACKAGING: Sealing all types of joints and cracks in many ́ Advanced adhesion, no activation on site 1 roll of 25 m length different structures and applications including: required ́ Tunnels and culverts ́ Highly flexible - high crack and joint bridging ́ Hydroelectric power plants ability ́ Sewage treatment plants ́ Good chemical resistance ́ Basements ́ Weathering and UV-resistant ́ Water retaining structures ́ Root penetration resistant ́ Drinking water reservoirs ́ Performs well within a wide range of tem- Sealing of: peratures ́ Movement joints ́ Plasticiser-free ́ Construction joints ́ Hot air weldable ́ Pipe penetrations ́ Can be used in contact with potable/drinking ́ Cracks water Building components where differential settle- ment is expected 12 Sikadur-Combiflex® SG-20 P300 CHARACTERISTICS CHARACTERISTICS PACKAGING: Sealing all types of joints and cracks in many ́ Advanced adhesion, no activation on site 600 ml unipacs 20 different structures and applications including: required unipacs/box, 48 boxes/ ́ Tunnels and culverts ́ Highly flexible - high crack and joint bridging pallet ́ Hydroelectric power plants ability 300 ml cartridges 12 ́ Sewage treatment plants ́ Good chemical resistance cartridges/box, 112 ́ Basements ́ Weathering and UV-resistant boxes/pallet ́ Water retaining structures ́ Root penetration resistant ́ Drinking water reservoirs ́ Performs well within a wide range of tem- COLOR: Sealing of: peratures Oxide Red ́ Movement joints ́ Plasticiser-free ́ Construction joints ́ Hot air weldable ́ Pipe penetrations ́ Can be used in contact with potable/drinking ́ Cracks water Building components where differential settle- ment is expected Sikadur-Combiflex® SG-20 P400 CHARACTERISTICS CHARACTERISTICS PACKAGING: Sealing all types of joints and cracks in many ́ Advanced adhesion, no activation on site 1 roll of 25 m length different structures and applications including: required ́ Tunnels and culverts ́ Highly flexible - high crack and joint bridging ́ Hydroelectric power plants ability ́ Sewage treatment plants ́ Good chemical resistance ́ Basements ́ Weathering and UV-resistant ́ Water retaining structures ́ Root penetration resistant ́ Drinking water reservoirs ́ Performs well within a wide range of tem- Sealing of: peratures ́ Movement joints ́ Plasticiser-free ́ Construction joints ́ Hot air weldable ́ Pipe penetrations ́ Can be used in contact with potable/drinking ́ Cracks water Building components where differential settle- ment is expected SikaFuko® Eco-1 USE CHARACTERISTICS PACKAGING: SikaFuko® Eco 1 is used to seal construction ́ Re-injectable with Sika acrylic resins and as a Combi-pack in a cardboard joints in watertight structures against water micro-fine cement suspensions. box containing: and salt water ingress. It is cast into the ́ One time injectable with Sika polyurethane - 200 m SikaFuko® Eco 1 construction joints of the concrete. injection resins. - 10 m green PVC-hose (inlet) ́ Highly economical - 10 m white PVC-hose (outlet) When it is necessary to seal or reseal the ́ Ideal back-up solution for combination with - Accessories (2 m connecting construction joints, SikaFuko® Eco 1 can be waterstops pipe, 4 m heat shrink sleeve , x injected with the most suitable Sika Injection ́ Easy to install 50 closure plugs, 1 can of glue, materials based on acrylic and polyurethane ́ Tested in water pressures up to 10 bar (100m) 1 roll of tape, x 800 fastening resins or micro-fine cement suspensions. clips) ́ Suitable for many different structures and construction methods SikaFuko® VT1 Combipack USE CHARACTERISTICS PACKAGING: ́ Sealing construction and connection joints ́ Uses unique ‘valve techniques’ for injection Supplied as a Combi-pack ́ Suitable for many different structures and ́ Multiple re-injections with Sika injection in a cardboard box con- construction methods where additional joint acrylate resins or microfine cement taining: security/safety is required suspensions 200 m SikaFuko® VT-1 ́ One-time injectable with Sika injection 10 m green PVC-hose ́ Prevents water ingress through concrete polyurethane and epoxy resins (inlet) joints in the following typical structures: ́ Easy and secure installation 10 m white PVC-hose Water retaining or excluding structures, (outlet) water reservoirs, dams, canals, sewage ́ Tested in water pressures up to 10 bar (100 m) treatment plants, tunnels, subways, ́ External test reports for suitable injection retaining walls material ́ As a back-up system for waterbars ́ Ideal back-up system in combination with ́ Enables testing for water leaks waterbars ́ Long-term references on many international projects 13 Sikalastic® Metal Primer USE CHARACTERISTICS PACKAGING: ́ Fast curing, overcoat possible after 6 hours 5.0 L (~7.17 kg) con- Versatile and anti-corrosive primer on metal sub- ́ Corrosion protection in industrial and marine tainers strates for use with: environments Component A: 2.5 L ́ SikaRoof® MTC (~3.7 kg) ́ Easy application by brush or roller ́ Sikalastic® roofing systems Component B: 2.5 L ́ Enhances adhesion to a broad range of ́ Sikafloor® balcony waterproofing systems (~3.47 kg) metallic substrates ́ Sikagard® hygiene coatings ́ Protects against migration of volatile bitu- Barrier against migration of volatile bitumen men or plasticizers or plasticizer migration Sikalastic®-8850 USE CHARACTERISTICS PACKAGING: ́ Sikalastic®-8850 may only be used by ́ Seamless Component A (ISO) 200 experienced professionals. ́ Very fast reactivity and curing time L drum (225 kg) Concrete: ́ Almost immediate return-to-service Component B (Resin) time 200 L drum (205 kg) ́ Abrasion resistant protective coating in industrial and manufacturing facilities ́ Performs in constant dry temperatures ́ Waterproofing for cut and cover structures, from -30 °C to +100 °C submersed structures, walkways and balconies, ́ Good crack bridging properties floors and car park decks ́ Good chemical and abrasion resistance ́ Water retaining structures in power plants ́ Secondary containment structures ́ Tank, bund and pit lining in sewage and waste water treatment plants Steel: ́ Truck bed lining ́ Wear resistant coating on hydraulic steel structures Sikalastic®-851 (A,B) USE CHARACTERISTICS PACKAGING: Sikalastic®-851 may only be used by experienced ́ Very fast reactivity and curing time Part A-211kg drums ~189 professionals. ́ Almost immediate return-to-service time L (Isocyanate) ́ Applicable in temperatures from -10 °C Part B-202kg drums On Concrete: ~189L (Polyol/ - ́ Waterproofing on concrete bridge decks, mem- to +50 °C amine) brane underneath hot rolled asphalt, certified in ́ Performs in constant dry temperatures Color: accordance to BBA/HAPAS from -30 °C to +100 °C Part A-Transparent ́ Waterproofing on concrete bridge decks, ́ Excellent crack bridging properties Part B-Grey membrane underneath mastic asphalt, tested in ́ Moderate chemical resistance accordance to ETAG 033 ́ Good abrasion resistance ́ Waterproofing for submersed structures ́ Not UV resistant ́ Waterproofing for cut and cover structures ́ Waterproofing on walkways and balconies ́ Waterproofing on floors and car park decks ́ Water retaining structures in power plants ́ Tank, bund and pit lining in fresh water areas of sewage and waste water treatment plants On Steel: ́ Truck bed lining Sikalastic®-8800 (A,B) USE CHARACTERISTICS PACKAGING: Sikalastic®-8800 may only be used by experienced ́ Very fast reactivity and curing time Part-A 212kg drums professionals. ́ Almost immediate return-to-service time ~189 L(Isocyanate) ́ Excellent crack bridging properties Part-B 191kg drums On concrete ~189 L (Polyamine) ́ Good chemical resistance ́ Abrasion resistant protective coating in ́ Excellent abrasion resistance Color: industrial and manufacturing facilities ́ UV light exposure may lead to yellowing Part A-Transparent ́ Waterproofing for cut and cover structures Part B-Grey ́ Waterproofing for submersed structures ́ Waterproofing on walkways and balconies ́ Waterproofing on floors and car park decks ́ Water retaining structures in power plants ́ Secondary containment structures ́ Tank, bund and pit lining in sewage and waste water treatment Plants On steel ́ Truck bed lining ́ Waterproofing and wearing layer on steel ridges 14 Sikaplan® WP 1100-30 HL Sikaplan® WP 1100-22 HL Sikaplan® WP 1100-20 HL Sikaplan® WP 1100-15 HL USE CHARACTERISTICS PACKAGING: Waterproofing of tunnels and basements against ́ High resistance to ageing Sikaplan® WP 1100-30 HL water ingress ́ Based on virgin material with consistent Sikaplan® WP 1100-22 HL quality 2.20 m (width) × roll length ́ Without DEHP (DOP) plasticisers individual as specified ́ With signal layer to indicate damages Sikaplan® WP 1100-20 HL ́ Optimized flexibility, tensile strength and Sikaplan® WP 1100-15 HL multi-axial elongation 2.20 m (width) × roll length20m or individual as ́ Elastic material behaviour specified ́ High resistance to mechanical influences ́ Flexible in cold temperatures ́ Suitable for contact with acidic soft water and alkaline environments ́ Resistant to root penetration and micro- organisms ́ Optimized workability, thermal weldable ́ Can be installed on damp substrates ́ Temporary UV stability for installation ́ Self-extinguishing in fire Sikaplan® WP 1100-20 HLE USE CHARACTERISTICS PACKAGING: Waterproofing of tunnels and basements with ́ Embossing for easy flow of repair injection 2.20 m (width) × roll material length individual as doublelayer membrane systems specified ́ High resistance to ageing ́ Based on virgin material with consistent quality ́ Without DEHP (DOP) plasticisers ́ With signal layer to indicate damages ́ Optimized flexibility, tensile strength and multi-axial ́ elongation ́ Elastic material behavior ́ High resistance to mechanical influences ́ Flexible in cold temperatures ́ Suitable for contact with acidic soft water and alkaline environments ́ Resistant to root penetration and micro-or- ganisms ́ Optimized workability, thermally weldable ́ Can be installed on damp substrates ́ Temporary UV stability for installation ́ Self-extinguishing in fire 15 Sikaproof® A-08 HC USE CHARACTERISTICS PACKAGING: SikaProof® A-08 HC may only be used by experi- ́ S Fully bonded to the reinforced concrete PE-film structure Roll Width 2.0m enced professionals. Roll Length 25 m Waterproofing and concrete protection for base- ́ No lateral water underflow between the ments and other below ground concrete structures concrete structure and the membrane against ground water ingress. Suitable for use on: system ́ Reinforced concrete base slabs ́ Specifically designed for hot climates ́ Reinforced concrete walls with both single and ́ Validated high water tightness double-faced formwork ́ High flexibility and crack-bridging ́ Extension and reconstruction work ́ Pre-applied, before fixing reinforcement & ́ Prefabricated structures concrete placement ́ Shotcrete structures ́ Easy to install with fully adhered joints (no welding required) ́ Cold-applied (no pre-heating or open flames) ́ Good tear and impact resistant properties ́ Temporarily resistant to weathering and UV-light during construction ́ Highly durable and resistant to aging ́ Resistant to aggressive elements in natural ground water and soil ́ Can be combined with other approved Sika Waterproofing / Joint Sealing Systems Sikaproof® A-12 HC USE CHARACTERISTICS PACKAGING: Damp-proofing, waterproofing and concrete ́ Pre-applied, before the reinforcement is fixed PE-film and the concrete is poured Roll Width 1 and 2.0m protection for basements and other below ground concrete structures against ground water ingress. ́ Fully and mechanically bonded to the rein- Roll Length 20 m Suitable for use on: forced concrete structure ́ No lateral water underflow between the con- ́ Below ground reinforced concrete slabs crete structure and the membrane system ́ On reinforced concrete walls with both single ́ High water tightness tested according to and double-faced formwork various standards ́ Extensions and reconstruction work ́ Easy to install with fully adhered joints (no ́ Prefabricated structures welding required) ́ Cold-applied (no pre-heating or open flames) ́ Temporarily resistant to weathering and UV- light during construction ́ Specially designed for use in hot climate areas ́ Resistant to aging ́ High flexibility and crack-bridging abilities ́ Resistant to aggressive mediums in natural ground water and soil ́ Can be combined with other approved Sika Waterproofing / Joint Sealing Systems 16 Sikaproof® A+ 12 USE CHARACTERISTICS PACKAGING: SikaProof® A+ 12 may only be used by experienced ́ Pre-applied: Fixed before placing reinforce- Roll Width 1 and 2.0m ment and casting concrete Roll Length 20 m professionals.Damp-proofing, waterproofing and concrete protection for basements and other below ́ Dual bond: Mechanical and adhesive bond ground concrete structures against ground water with fresh concrete ingress. Suitable for use on: ́ Fully and permanently bonded to the rein- forced concrete structure ́ Reinforced concrete base slabs ́ No lateral water migration between the ́ Reinforced concrete walls with single and dou- concrete structure and the membrane blefaced formwork system ́ Extension and reconstruction works ́ High watertightness tested according to ́ Prefabricated structures various standards ́ Easy to install with fully adhered joints ́ Cold-applied or thermally jointed ́ Temporarily resistant to weathering and UV exposure during construction ́ Resistant to aging ́ High flexibility and crack-bridging capabil- ities ́ Resistant to aggressive conditions in natu- ral ground water and soil ́ Can be combined with other approved Sika® Waterproofing / Joint Sealing Systems SikaProof® Tape A+ USE CHARACTERISTICS PACKAGING: SikaProof® Tape A+ may only be used by experi- ́ Fully bonded to the concrete structure 2 rolls packed in one ́ No lateral water migration (identical to cardboard box, each roll enced professionals. 25 m long and 150 mm SikaProof® A+ membrane) width ́ High adhesion and sealing capability, espe- cially in cold and damp conditions ́ Simple and fast to install Sikaproof® Tape-150 A USE CHARACTERISTICS PACKAGING: ́ Fully bonded to the concrete structure 2 rolls packed in one SikaProof® Tape-150 A is used for sealing ́ No lateral water underflow (like SikaProof® cardboard box, each roll transverse overlap joints, connections and details 25 m long and 150 mm within the SikaProof A membrane system (internal A system) width / fleece side) in combination with the SikaProof ́ High adhesion and sealing ability, especially ExTape-150. in cool and damp conditions ́ Easy and fast to install 17 ROOFING SOLUTIONS 18 SikaRoof® MTC-12 USE CHARACTERISTICS SikaRoof® MTC-12 may only be used by experi- ́ Proven technology - over 25-year track record enced professionals. SikaRoof® MTC-12 can be ́ One component - no mixing, easy and ready to use used as following: ́ UV resistant - Highly reflective (RAL 9016) and resistant to yellowing ́ Cold applied - requires no heat or flame ́ Roof waterproofing solution for new ́ Seamless roof waterproofing membrane construction and refurbishment projects ́ Compatible with Sika® Reemat Standard - easy to detail ́ For roofs displaying complex detail areas ́ Fast curing - free from resin damage almost immediately on and geometry, even when accessibility is application limited ́ High elastic and crack-bridging - retains flexibility even at low ́ For cost efficient life cycle extension of temperatures. High root resistance failing roofs ́ Easily re-coated when needed - no stripping required ́ In combination with Sikalastic®-621 TC - SR ́ Good adhesion to most substrates - see primer chart (traffic white RAL 9016) for cool roofs and ́ Vapour permeable - allows substrate to breathe solar roofs ́ Strong resistance to common atmospheric chemicals SikaRoof® MTC-15 USE CHARACTERISTICS SikaRoof® MTC-15 may only be used by experi- ́ Proven technology - over 25-year track record enced professionals. SikaRoof® MTC-15 can be ́ One component - no mixing, easy and ready to use used as following: ́ UV resistant - Highly reflective (RAL 9016) and resistant to yellowing ́ Cold applied - requires no heat or flame ́ Roof waterproofing solution for new ́ Seamless roof waterproofing membrane construction and refurbishment projects ́ Compatible with Sika® Reemat Standard - easy to detail ́ For roofs displaying complex detail areas ́ Fast curing - free from resin damage almost immediately on applica- and geometry, even when accessibility is tion limited ́ High elastic and crack-bridging - retains flexibility even at low tempera- ́ For cost efficient life cycle extension of tures. High root resistance failing roofs ́ Easily re-coated when needed - no stripping required ́ In combination with Sikalastic®-621 TC - SR ́ Good adhesion to most substrates - see primer chart (traffic white RAL 9016) for cool roofs and ́ Vapour permeable - allows substrate to breathe solar roofs ́ Strong resistance to common atmospheric chemicals SikaRoof® MTC-18 USE CHARACTERISTICS SikaRoof® MTC-18 may only be used by experi- ́ Proven technology - over 25-year track record enced professionals. SikaRoof® MTC-18 can be ́ One component - no mixing, easy and ready to use used as following: ́ UV resistant - Highly reflective (RAL 9016) and resistant to yellowing ́ Cold applied - requires no heat or flame ́ Roof waterproofing solution for new con- ́ Seamless roof waterproofing membrane struction and refurbishment projects ́ Compatible with Sika® Reemat Standard - easy to detail ́ For roofs displaying complex detail areas ́ Fast curing - free from resin damage almost immediately on applica- and geometry, even when accessibility is tion limited ́ High elastic and crack-bridging - retains flexibility even at low tem- ́ For cost efficient life cycle extension of peratures. High root resistance failing roofs ́ Easily re-coated when needed - no stripping required ́ In combination with Sikalastic®-621 TC - SR ́ Good adhesion to most substrates - see primer chart (traffic white RAL 9016) for cool roofs and ́ Vapour permeable - allows substrate to breathe solar roofs ́ Strong resistance to common atmospheric chemicals SikaRoof® MTC-22 USE CHARACTERISTICS SikaRoof® MTC-22 can be used as following: ́ Proven technology - over 25 year track record ́ One component/ no mixing, easy & ready to use ́ Roof waterproofing solution for new con- ́ UV resistant - Highly reflective (RAL9016) and resistant to yellowing struction and refurbishment projects ́ Cold applied - requires no heat or flame ́ For roofs displaying complex detail areas ́ Seamless roof waterproofing membrane and geometry, even when accessibility is ́ Compatible with Sika® Reemat Premium limited ́ Fast curing - free from resin damage almost immediately on applica- ́ For cost efficient life cycle extension of tion failing roofs ́ High elastic and crack-bridging - retains flexibility even at low tem- ́ In combination with Sikalastic®-621 TC – SR peratures. High root resistance (traffic white RAL 9016) for cool roofs and ́ Easily re-coated when needed -no stripping required solar roofs ́ Good adhesion to most substrates- see primer chart ́ Vapour permeable - allows substrate to breathe ́ Strong resistance to common atmospheric chemicals 19 Sikalastic® 590 USE CHARACTERISTICS PACKAGING: ́ For waterproofing solutions in both new ́ Good behavior under limited water ponding 20 kg Plastic pails construction and refurbishment projects ́ UV resistant and resistant to yellowing and Grey and white ́ For roofs with many details and complex weathering geometry when accessibility is limited ́ Highly elastic and crack-bridging ́ For cost efficient life cycle extension of ́ Non-toxic and VOC compliant water-based coating failing roofs ́ One component - ready to use ́ For reflective coating to enhance energy ́ Excellent adhesion on porous and non-porous substrates efficiency by reducing cooling costs (Sika- ́ Seamless waterproofing membrane lastic®-590 White) ́ Water vapour permeable Sikalastic®-612 USE CHARACTERISTICS PACKAGING: ́ Water-proofing of flat and pitched roof ́ Single component 15L (~21.3 kg), single structures ́ Cold applied use pails ́ Treatment of new construction and refur- ́ Can be reinforced where required White or Grey bishment of existing structures ́ Seamless, fully bonded membrane based ́ Applicable to existing concrete, asphalt, upon moisture-triggered chemistry roofing felt, brickwork, asbestos cement ́ Vapour permeable & Elastic decks (subject to condition and priming ́ Good adhesion to most substrates – see table requirements). ́ No mixing, easy and ready to use ́ Moves with normal thermal movement - Retains flexibility even at low temperatures ́ Reinforced system - easy to detail ́ Free from rain damage almost immediately on application (see table) ́ Economic – provides a cost-efficient life cycle extension of failing roofs ́ Allows substrate to breathe ́ Requires no heat or flame ́ Easily recoated when needed - no stripping required Sikalastic®-614 USE CHARACTERISTICS PACKAGING: ́ Sikalastic®-614 may only be used by experi- ́ Single component - no mixing, easy and ready 15 L (~20.7 kg) metal enced professionals. to use pail ́ For roof waterproofing solutions in both ́ Cold applied - requires no heat or flame 5 L (~7.1 kg) metail pail new construction and refurbishment ́ Seamless membrane projects ́ Compatible with Sika® Reemat Premium - ́ For roofs displaying complex detail areas, easy to detail even when accessibility is limited ́ Easily recoated when needed - no stripping ́ For cost efficient life cycle extension of required failing roofs ́ Economic - provides a cost-efficient life cycle extension of ́ For waterproofing underneath tiles bonded failing roofs with adhesives on balconies and terraces ́ Vapour permeable - allows substrate to breathe ́ Elastic - retains flexibility even at low temperatures ́ Good adhesion to most substrates - see table ́ Fast Curing - free from rain damage almost immediately on application Sikalastic®-618 USE CHARACTERISTICS PACKAGING: ́ Single component 15lt (~20.7 kg), pails ́ Water-proofing of flat and pitched roof ́ Cold applied White, Grey and Green structures ́ Treatment of new construction and ́ Can be reinforced where required refurbishment of existing structures ́ Seamless membrane based upon moisture- ́ Applicable to existing concrete, roofing triggered chemistry felt, brickwork, cementitious substrates, ́ Vapour permeable cement decks (subject to condition and ́ Elastic priming requirements). ́ Good adhesion to most substrates 20 Sikalastic®-625 USE CHARACTERISTICS ́ Roof waterproofing for new construction ́ Thickness: ~1,50 mm. PACKAGING: and refurbishment projects ́ Low maintenance 15 L container ́ Waterproofing of flat and pitched roof ́ Seamless structures, communal walkways, podium ́ 1-Part ready to use decks and roof terraces ́ Cold applied - requires no heat or flame ́ Waterproofing structures with numerous ́ Low temperature application > 2 °C details such as penetrations, drains, roof ́ Easy and quick application by spray, brush or lights and complex geometry roller ́ Waterproofing existing substrates of ́ Economic – provides a cost-efficient life cycle concrete, bituminous felt and coatings, extension of failing roofs brick, stone, asbestos cement, wood, ́ Water vapour permeable asphalt etc. ́ Retains flexibility at low temperatures ́ Only for exterior use ́ Moisture triggered technology develops early rain resistance ́ Elastic properties – tolerant of thermal move- ment ́ Impact and tear resistant Sikalastic®-641 USE CHARACTERISTICS PACKAGING: ́ Sikalastic®-641 may only be used by experi- ́ 1-part, no mixing, easy and ready to use 5 and 15 L containers enced professionals. ́ Thickness: ~1,30–2,2 mm ́ Top coat for SikaRoof® i-Cure-12/15/18/22 ́ Resistant to UV exposure systems in both new construction and ́ Highly reflective (~RAL 9016) refurbishment projects ́ Resistant to yellowing ́ Base coat and top coat for the ETA ́ Cold applied – requires no heat or flame approved, low odour Sikalastic®-641/-641 ́ Low odour - suitable for odour sensitive Economic, Standard, Enhanced, Premium projects and Premium Fleece systems ́ High solids content ́ Waterproofing structures with numerous ́ Seamless details such as penetrations, drains, roof ́ Easy to detail with Sika® Reemat Premium lights and complex geometry ́ Easily recoated - no removal required ́ Cost efficient service life extension of failing ́ Vapour permeable roofs ́ As a reflective top coat (traffic white ~RAL 9016) providing cool roof characteristics and solar efficient roofs ́ For odour sensitive areas ́ Only for exterior use Sikalastic®-701 USE CHARACTERISTICS PACKAGING: Sikalastic®-701 may only be used by experi- ́ Long term weathering performance 12.5 Kg pack size A+B: enced professionals. ́ Excellent weathering performance Part A 10.0 Kg ́ Aliphatic polyurethane, good UV and yel- Part B 2.5 Kg ́ Top coat for aromatic Liquid Applied Mem- lowing resistance branes ́ Good chemical resistance ́ Top coat applied over 2-C spray applied PU/ ́ Low soiling and easily cleanable PUA systems ́ Top coat for existing water-proofing system of flat and pitched roof structures, com- munal walkways, podium decks and terrace roofs. Sikalastic®-708 UV USE CHARACTERISTICS PACKAGING: ́ Sikalastic®-708 UV may only be used by ́ Aliphatic protective topcoat for aromatic Component-A 11 KG experienced professionals. polyurethane or polyurea waterproofing Component-B 4 KG ́ UV protection of the 2C PU/PUA wa- membranes. pigmented terproofing membranes either cold and ́ Fast curing Component-A 11.6 KG ́ Good adhesion properties Component-B 3.4 KG hot-applied ́ Top coat for existing waterproofing ́ High hardness and resistance achieved with a system of flat and pitched roof structures, single application. communal walkways, podium decks and ́ Excellent gloss and colour retention terrace roofs ́ Aliphatic polyisocyanate basis. No discoloura- ́ Suitable as top coat for areas with vehicle tion or pedestrian traffic ́ Good weathering resistance ́ Low soiling and easily cleanable ́ Resistant to ponding water 21 Sikalastic®-709 USE CHARACTERISTICS PACKAGING: ́ For use as waterproofing membrane on ́ Crack bridging ability Kit of 26.5 kg (A+B): new roof structures and for refurbishment ́ Highly elastic membrane Component A 25 kg ́ Fast curing Component B 1.5 kg of old roofs ́ For use on fully exposed roofs to UV, pro- ́ Thick layer (up to 2kg/m2 applied in a single tected by the use of an aliphatic topcoat layer) ́ For other concrete structures and on ́ Cold applied, self levelling behavior non-trafficked concrete areas with an ́ Desired thickness in one layer application (up additional top coat for UV protection. to 2.2 kg/m2 applied in a single layer) ́ Waterproofing kit achieved with or without the use of reinforcement ́ Can be covered with an aliphatic Sikalastic®-835i USE CHARACTERISTICS PACKAGING: ́ Very fast curing time Part A (resin) 205 kg For roof waterproofing solutions in both new ́ Easy to detail, even when accessibility is black drums construction and refurbishment projects: Part B (Isocyanate) 225 limited ́ Existing bituminous membranes kg red drums ́ High elasticity (>250%) ́ Terraces ́ Good crack bridging properties (Class A4 at ́ Roof screeds +23°C / B3.1 at -20°C EN1062-7) Coating for concrete protection according the ́ High impact, abrasion and puncture resistance requirements of EN 1504-2, for: ́ Good resistance to many chemicals ́ Decks ́ Applicable in temperatures from -15°C to ́ Bridges +70°C ́ Tunnels ́ Performs in constant dry temperatures from Metal and concrete water retaining structures: -30°C to +140°C ́ Dams ́ Total solid composition, without VOC ́ Canals ́ Excellent anticorrosion protection ́ Tanks ́ Suitable for most substrates (concrete, metal, ́ Safety tanks for petrochemical plants bituminous membrane, masonry and wood) ́ Pipelines on roofs suitable for vehicle access and car park decks Coatings for scenery and decorative structures. Sikalastic®-833 R - ALU USE CHARACTERISTICS Designed for the following waterproofing ́ Good crack-bridging properties PACKAGING: applications: ́ Seamless finish or textured when over- Part A (Polyamide) 192 sprayed kg drum ́ New construction and refurbishment ́ Good resistance to UV exposure Part B (Isocyanate) 208 projects ́ Thickness: ~ 2,0–2,4 mm kg drum ́ Balcony and terrace decks underneath a ́ Good elasticity and elongation at break protective layer (i.e. ballast, paving slabs, ́ Good abrasion resistance tiles) ́ Fast application ́ Waterproofing membrane for concrete, ́ Applied by 2-Component hot spray equipment metal, pedestrian decks, stadium seating ́ Easily detailed around complex geometries floor areas ́ Good chemical resistance ́ Solar reflective surfaces ́ Available in various colours ́ For exterior use only ́ Performs in constant temperatures from -30°C to +100°C ́ Good adhesion to many substrates with the appropriate Primers ́ Can be applied over existing corrugated metal roofs 22 Sikalastic®-851 R USE CHARACTERISTICS PACKAGING: Sikalastic®-851 R may only be used by experi- ́ Solvent free Component-A 211 kg enced professionals. ́ Fast application: application with 2-part hot drum Clear / brownish spray equipment Component-B 202 kg ́ For use as a waterproofing membrane drum Grey or yellowish ́ Fast curing: over coating with top coat possi- on flat and pitched roof structures with ble after approximately 10 minutes additional top coat for UV-protection for ́ Seamless waterproofing membrane exposed roofs. ́ High Solids: contains no fillers ́ For use as a waterproofing membrane ́ Excellent crack-bridging properties underneath planting or hard landscaping on ́ Highly elastic and crack bridging podium areas. ́ Low viscosity ́ For use as a waterproofing membrane ́ Water vapour permeable allows the substrate underneath XPS insulation as part of an to breathe inverted or vegetative roof system. ́ Good adhesion to most substrates ́ For use as a waterproofing membrane for ́ 12 months shelf life other concrete structures and on non-traf- ficked concrete areas with an additional top coat for UV-protection. Sikalastic®-852 R USE CHARACTERISTICS PACKAGING: Sikalastic®-852 R may only be used by ́ Thickness: ~1,9 mm Part A (Resin) 188 kg experienced professionals. For the following ́ Seamless finish drums waterproofing applications: ́ Good tear resistance Part B (ISO) 208 kg ́ Fast application drums ́ Flat and sloping fully exposed roofs to UV, Part C (Colour paste to ́ Applied by 2-component hot spray equipment protected by an aliphatic topcoat add into Part A) 4 kg ́ Easily detailed around complex geometries ́ New construction and refurbishment ́ Good chemical resistance projects ́ Available in various colours ́ Concealed and buried roofs ́ Good adhesion on most of building materials, ́ Exposed roofs on regulated markets accord- with the appropriate primers ing to ETAG 005. ́ Suitable substrates: concrete, cementitious roof screeds, bituminous felts and coatings, metal, brickwork, asbestos cement, ceramic tiles. Sikalastic®-708 UV USE CHARACTERISTICS PACKAGING: ́ Sikalastic®-708 UV may only be used by ́ Aliphatic protective topcoat for aromatic Component-A 11 KG experienced professionals. polyurethane or polyurea waterproofing Component-B 4 KG ́ UV protection of the 2C PU/PUA wa- membranes. pigmented terproofing membranes either cold and ́ Fast curing Component-A 11.6 KG ́ Good adhesion properties Component-B 3.4 KG hot-applied ́ Top coat for existing waterproofing ́ High hardness and resistance achieved with a system of flat and pitched roof structures, single application. communal walkways, podium decks and ́ Excellent gloss and colour retention terrace roofs ́ Aliphatic polyisocyanate basis. No discoloura- ́ Suitable as top coat for areas with vehicle tion or pedestrian traffic ́ Good weathering resistance ́ Low soiling and easily cleanable ́ Resistant to ponding water Sikalastic®-859 R USE CHARACTERISTICS PACKAGING: ́ Sikalastic®-859 R Ultimate may only be ́ Friend of the environment - does not contain Part A (ISO) in drums of used by experienced professionals. VOC 225 kg. ́ No weight losses Part B (RESIN) in drums ́ For use as waterproofing membrane on ́ No secondary reaction products of 205 kg new roof structures and for refurbishment of old roofs ́ Resistant to atmospheric agents ́ For use on fully exposed roofs to UV, pro- ́ Low permeability values tected by the use of an topcoat ́ For use as protective coating (EN1504-2) for concrete structures on non-trafficked areas or use as a waterproofing membrane ́ For other concrete structures and on non-trafficked concrete areas with an additional top coat for UV-protection. ́ For use as a waterproofing membrane underneath planters or hard landscaping on podium areas 23 Sikalastic®-560 USE CHARACTERISTICS PACKAGING: ́ For roof waterproofing solutions in both ́ One-component - ready to use 20 kg Containers new construction and refurbishment ́ Seamless waterproofing membrane Color: White projects ́ UV resistant and resistant to yellowing & ́ For roofs with many details and complex weathering geometry when accessibility is limited ́ Highly elastic and crack-bridging ́ For cost efficient life cycle extension of ́ Non-toxic and VOC compliant water-based failing roofs coating ́ For reflective coating to enhance energy ́ Excellent adhesion on porous and non-porous efficiency by reducing cooling costs substrates ́ Water vapour permeable - allows the sub- strate to breathe Sikalastic®-505 USE CHARACTERISTICS PACKAGING: ́ For exposed roof waterproofing solutions in ́ UV resistant and resistant to yellowing and 20 kg Plastic Pails both new construction and refurbishment weathering Color: White projects ́ Highly elastic and crack-bridging ́ For exposed roofs with many details and ́ One component - ready to use complex geometry when accessibility is ́ Excellent adhesion on porous and non-porous limited substrates ́ Waterproofing underneath screeds in wet ́ Seamless, fully bonded waterproofing membrane rooms ́ Water vapour permeable ́ For reflective coating to enhance energy efficiency by reducing cooling costs Sarnafil® TG 66 USE CHARACTERISTICS PACKAGING: Roof waterproofing membrane for roofs with ́ Proven performance over decades Width 2m ballast(example gravel, concrete slabs, green ́ Resistant to micro-organisms TG 66-20 roof) and / or exposed flat roofs: ́ Resistant to root penetration Roll W 60KG & L 15m ́ High dimensional stability due to glass fleece TG 66-18 ́ Loosely laid and Ballasted roofs inlay Roll W 54KG & L 15m ́ Green roofs ́ Compatible to bitumen TG 66-15 ́ Utility roofs ́ Resistant to permanent UV exposure Roll W 60KG & L 20m ́ Inverted roofs ́ Resistant against impact load and hail TG 66-12 Roof waterproofing membrane for exposed ́ Resistant to all common environmental Roll W 60KG & L 25m roof junction zones: influences ́ Roof waterproofing for junctions and ́ Resistant to mechanical influences flashings, example wall and parapet junc- ́ Hot air welding without use of open flame tions, roof lights, etc. which are perma- ́ Recyclable nently exposed in installations of Sarnafil® TG 66-20, 18, 15, 12 roof waterproofing systems with ballast. ́ Roof waterproofing for junctions and flashings in installations of all types of ́ Sarnafil® TS 77 and TG 76 Felt exposed roof waterproofing systems Sarnafil® TS 77 USE CHARACTERISTICS PACKAGING: Waterproofing membrane for: ́ Proven performance over decades. Width 2m ́ Mechanically fastened roofing systems. ́ Various colours available. TG 77-20 ́ High reflectance properties for excellent cool Roll W 66KG & L 15m ́ Enhancement of solar reflection of exist- ́ roofing characteristics (relevant only for color TG 77-18 ing TPO roofs (relevant only for colour RAL RAL 9016 SR). Roll W 59.50KG & L 15m 9016 SR) TG 77-15 ́ Resistant to permanent UV exposure. Roll W 66KG & L 20m ́ High dimensional stability due to glass fleece TG 77-12 inlay. Roll W 66KG & L 25m ́ Resistant to permanent wind exposure. ́ Resistant against impact load and hail. ́ Resistant to all common environmental influences. ́ Resistant to micro-organisms. ́ Resistant to root penetration. ́ Compatible to old bitumen. ́ Hot air welding without use of open flames. ́ Recyable 24 Sarnafil® S 327 USE CHARACTERISTICS PACKAGING: Waterproofing membrane for: ́ Proven performance over decades. Width 2m ́ Mechanically fastened roofing systems. ́ Resistant to permanent UV irradiation. S 327-20 ́ Resistant to permanent wind exposure. Roll W 72KG & L 15m ́ Resistant against impact load and hail. S 327-18 ́ Resistant to all common environmental Roll W 66KG & L 15m influences. S 327-15 ́ Hot air welding without use of open flames. Roll W 72KG & L 20m ́ High water vapour permeability S 327-12 Roll W 60KG & L 20m ́ Recyable Sarnafil® TG 76 Felt USE CHARACTERISTICS PACKAGING: Roof waterproofing membrane for fully bonded ́ Proven performance over decades Width 2m exposed roofs with Sarnacol® 2142 S. ́ Various colours available TG 76-20 Felt ́ Resistant to permanent UV irradiation Roll W 70KG & L 15m Approved standards TG 76-18 Felt ́ High dimensional stability due to glass fleece ́ Slated/mineralized bitumen sheets; new inlay Roll W 63KG & L 15m and aged TG 76-15 Felt ́ Resistant to all common environmental influ- ́ OSB, plywood, fibre cement boards Roll W 74KG & L 20m ences ́ Mineral fibre boards (Example: Bondrock TG 76-12 Felt ́ Resistant to micro-organisms Roll W 60KG & L 20m MV) ́ Compatible to old bitumen ́ PUR/PIR insulation boards, (Example: ́ Hot air welding without use of open flames Sarnatherm PIR GT, Kingspan TR 27) ́ Recyclable ́ Concrete, lightweight concrete Sarnafil® G 410 L Felt USE CHARACTERISTICS PACKAGING: Sarnafil® G 410 L Felt can be used as a water- ́ Outstanding resistance to weathering, includ- PE-foil Roll proofing membrane for fully adhered, exposed ing permanent UV irradiation Width 2.0m and Length flat roofs ́ Excellent weldability depends membrane ́ Excellent flexibility in cold temperatures thickness 1.2 mm X 20.0 M (ap- ́ Excellent dimensional stability prox. 74kg roll ́ High resistance to mechanical impact 1.5 mm X 20.0 M (ap- ́ High water vapour permeability prox. 86kg roll ́ High solar reflectance (in case of white colour 2.0 mm X 15.0 M (ap- top layer) prox. 87kg roll ́ Available in various colours ́ Reduced dirt pick-up due to lacquer coating ́ Recyclable Sarnafil® G 410 L USE CHARACTERISTICS PACKAGING: Roof waterproofing membrane for roofs with ́ Proven performance over decades. PE-foil Roll ballast (example: gravel, concrete slabs, green ́ Lacquer coated surface. Width 2.0m ́ High dimensional stability due to glass fleece G 410-20 roof): inlay. Roll W 73.20KG & L 15m ́ Loosely laid and ballasted G 410-18 ́ Green roofs ́ Resistant to permanent UV irradiation. Roll W 66KG & L 15m ́ Utility roofs ́ High water vapour permeability. G 410-15 ́ Inverted roofs ́ Resistant to all common environmental Roll W 73KG & L 20m influences. Roof waterproofing membrane for exposed G 410-15 ́ Hot air welding without use of open flames. Roll W 72KG & L 20m roof junction zones: ́ Recyclable. ́ Roof waterproofing for junctions and flashings, example: wall and parapet junc- tions, roof lights, etc. which are junctions, roof lights, etc., which are permanently exposed in roof lights, etc. which are permanently exposed in installations of Sarnafil® G 410-20, 18, 15, 12 L roof water- proofing systems with ballast. ́ Fully bonded junction areas with contact adhesive Sarnacol®-2170 in mechanically fastened roof systems with Sarnafil® S 327-types 25 Sarnafil® G 410-18 EL Felt USE CHARACTERISTICS PACKAGING: ́ This product may only be used by experi- ́ Proven performance over decades PE-foil Roll enced professionals. ́ Lacquer coated surface Width 2.0m ́ Fully bonded, roof waterproofing membrane ́ Various colours available Length 15 m for exposed roofs ́ Fast installation with Sarnacol® adhesives Weigh 78KG ́ Enhancement of solar reflection of existing ́ High reflectance properties for excellent cool roof- PVC roofs (~RAL 9016 SR) ing characteristics (relevant only for colour RAL 9016 SR). ́ Resistant to UV exposure ́ High dimensional stability due to glass fleece inlay ́ High water vapour permeability ́ Resistant to all common environmental influences ́ Felt backing compatible with old bitumen surfaces. Heat weldable. Sikaplan® TB USE CHARACTERISTICS PACKAGING: ́ Resistant to permanent UV irradiation PE-foil Roll Roof waterproofing membrane for roofs with ́ High dimensional stability due to glass fleece Width 2.0m ballast (example: gravel, concrete slabs, green inlay Sikaplan TB-18 roof) and / or exposed flat roofs: Roll W 55.20KG & L ́ Loosely laid and ballasted ́ Resistant against impact load and hail 15m ́ Green roofs ́ Resistant to all common environmental influ- Sikaplan TB-15 ́ Utility roofs ences Roll W 60KG & L 20m ́ Inverted roofs ́ Resistant to mechanical influences Sikaplan TB-12 Roof waterproofing membrane for exposed ́ Resistant to micro-organisms Roll W 60KG & L 25m roof junction zones: ́ Resistant to root penetration ́ Roof waterproofing for junctions and ́ Compatible to old bitumen flashings, e.g. wall and parapet junctions, roof ́ Hot air welding without use of open flames lights, etc., which are permanently exposed ́ Recyclable in installations of Sikaplan® TB- 18, 15, 12 roof waterproofing systems with ballast. ́ Roof waterproofing for junctions and flashings in installations of Sikaplan® TM exposed roof waterproofing systems. Sikaplan® TM USE CHARACTERISTICS PACKAGING: ́ Resistant to permanent UV irradiation PE-foil Roll Waterproofing membrane for: ́ Resistant to permanent wind exposure Width 2.0m ́ Mechanically fastened roofing systems Sikaplan TM-18 ́ Resistant against impact load and hail Roll W ± 59KG & L 15m ́ Resistant to all common environmental Sikaplan TM-15 influences. Recyclable. Roll W ± 66KG & L 20m ́ Resistant to micro-organisms Sikaplan TM-12 ́ Compatible to old bitumen Roll W ± 60KG & L 25m ́ Hot air welding without use of open flames Sika® Reemat Premium USE CHARACTERISTICS PACKAGING: ́ Reinforcement for Sikalastic®, Sikafloor®, ́ Easy and quick application Roll Sikagard® and SikaRoof® MTC Systems ́ Easy to adjust to complicated details 1.3 m wide by 150 m ́ Reinforcement for SikaRoof® MTC Detailing ́ Ensures the correct thickness of the long base coat 1.3 m wide by 90 m ́ For new construction and refurbishment ́ Enhance the crack-bridging properties of long projects 0.3 m wide by 150 m ́ For roofs with many details and complex the system long geometry even when accessibility is limited. ́ Enhance mechanical properties of the system Sika® Joint Tape SA USE CHARACTERISTICS PACKAGING: ́ Reinforcement of joints between cover boards ́ Self-adhering, no primer required for most 3” (76.2 mm) or 6”(152.4 on insulation applications mm) w x 50’ (15.24 m) ́ Reinforcement of joints between plywood deck ́ Fleece facer allows positive resin/coating rolls. bond Carton contains 8 x 3” panels wide rolls and 4 x 6” ́ Reinforcement of joints and seams in metal ́ Stretches with membrane to accommo- wide rolls roofing date thermal and structural movement 100 of total ́ Stripping in of metal flanges to structural deck ́ Imparts additional strength and durability ́ Conforms to substrate contours and flashing conditions 26 BUILDING FINISHES 27 Sikaceram®-117 QA USE CHARACTERISTICS PACKAGING: ́ Suitable for bonding high absorption ́ Single component system 25 KG BAG ceramic tiles ́ Easy to mix and use ́ Indoor application without primer over ́ Good workability concrete, cement mortars, bricks ́ Excellent bond strength ́ Suitable for floors and walls application Sikaceram®-118 QA USE CHARACTERISTICS PACKAGING: ́ Laying all kind of ceramic tiles ́ Easy to use 25 kg bag ́ Laying marbles and natural stone, provided ́ Good adhesion to most substrates (con- not sensitive to water crete, cementitious mortar, stone, bricks) ́ Application indoor for walls and floors ́ Good workability and thixotropic consis- ́ Application outdoor for floors tency ́ Suitable for wet areas ́ Water and weather resistant ́ Extended open time Sikaceram®-550 Silent USE CHARACTERISTICS PACKAGING: As an adhesive for bonding the following ́ Impact sound insulation properties 15 kg bag types of tiles: ́ Layer thickness < 10 mm ́ All kinds of medium, large-sized tiles ́ Normal setting ́ Grès porcelain ́ Highly deformable ́ Ceramic ́ Fibre reinforced ́ Earthenware ́ Suitable for heated floors (Water and ́ Glazed electric systems) ́ Porcelain ́ High coverage ́ Stoneware ́ 1-part ́ Unglazed ́ Extended open time ́ Smooth application Bonding tiles for the following interior appli- cations: ́ Bathrooms ́ Residential environments ́ Existing floor finishes ́ Heated floors (Water and electric systems) ́ Leisure centres ́ Wet areas (occasionally wet) ́ Overlaying existing firmly fixed ceramic tiles or stones Lanko TileBond USE CHARACTERISTICS PACKAGING: ́ For the installation of absorptive and ́ For interior walls and floors. 25 kg bag non-absorptive wall and floor tiles for ́ Premixed, just add water. interior and exterior surfaces. ́ Prolonged open time. ́ Suitable for tiling on concrete, rendered ́ Excellent bond strength and consistency. brickwork and blockwork. ́ Non-toxic, non-flammable. ́ Water-resistant. ́ VOC - None (<10μg/lt) Lanko TTB USE CHARACTERISTICS PACKAGING: Interior and exterior walls and floors. ́ For interior and exterior walls and floors. 25 kg bag ́ Easy to use, just mix with water. ́ Laying tiles, marble or natural stone onto ́ Waterproof. concrete render; blockwork and rendered ́ Non-toxic, non-flammable. brickwork surfaces. ́ High build to facilitate layering. ́ Waterproof, therefore can be used to lay ́ Quick grip. tiles in wet areas such bathrooms etc. ́ VOC - None (<10μg/lt) 28 Lanko TTB+ USE CHARACTERISTICS PACKAGING: Interior and exterior walls and floors. ́ For interior and exterior walls and floors. 25 kg bag ́ Laying tiles, marble or natural stone onto ́ Easy to use, just mix with water. concrete render; blockwork and rendered ́ Waterproof. brickwork surfaces. ́ Non-toxic, non-flammable. ́ Waterproof, therefore can be used to lay ́ High build to facilitate layering. tiles in wet areas such bathrooms etc. ́ Quick grip. Lanko Sac 28 USE CHARACTERISTICS PACKAGING: ́ High bonding performance and deforma- ́ High bonding performance. 25 kg bag bility makes SAC 28+ suitable for bonding ́ Suitable for very large formats. reduced porosity natural stone or tiles onto ́ Permanently flexible. new or old substrates. ́ Waterproof ́ Suitable for very large formats, up to 3 ́ Suitable for bonding metal. 600 cm 2 . ́ Internal & external walk & floors ́ Waterproof, therefore suitable for bonding ́ VOC 1.6g/L on submerged substrates: ponds, tanks, swimming pools, water sport centres. ́ Permanent flexibility makes it resistant to thermal shock. ́ Suitable for bonding on non-permissi- ble substrates such as metal and film coatings. Lanko Sac 28+ USE CHARACTERISTICS PACKAGING: ́ High bonding performance and deforma- ́ High bonding performance. 25 kg bag bility makes SAC 28+ suitable for bonding ́ Suitable for very large formats. reduced porosity natural stone or tiles onto ́ Permanently flexible. new or old substrates. ́ Waterproof. ́ Suitable for very large formats, up to 3 ́ Suitable for bonding metal. 600 cm2 . ́ No Vertical Slip (Non-Sagging) ́ Waterproof, therefore suitable for bonding ́ CASIET Standard on submerged substrates: ponds, tanks, ́ VOC < 0.1g/L swimming pools, water sport centres. ́ Permanent flexibility makes it resistant to thermal shock. ́ Suitable for bonding on non-permissi- ble substrates such as metal and film coatings. Lanko Floorbond USE CHARACTERISTICS PACKAGING: ́ Fixing ceramic tiles, slates, marbles, gran- ́ Easy to use 25 kg bag ite, natural stone. ́ Economical ́ Installing large size tiles on interior and ́ Bedding thickness range from 10mm to exterior floors. 30mm ́ Installing tiles on irregular substrate. En- ́ Classification: C1 (BS EN Standards) hance with Lanko Mortaflex ECO or Lanko Davelastic for installa¬tion of large or heavy tiles, in external or in immersed. Lanko Colorgrout USE CHARACTERISTICS PACKAGING: ́ Suitable for wall and floor tiling in joints up ́ Available in a wide range of colours. 20 kg bag to 5 mm wide. ́ Prevents mould. ́ Suitable for wet areas such as swimming ́ Good adhesion to absorptive and non-ab- pools and bathrooms. sorptive surfaces. ́ In special areas like kitchens, hospitals ́ Does not stain tiles. and cleanrooms where a stain and fungal ́ Excellent ultra-violet (U.V.) resistance. resistant joint filler is required. ́ Waterproof*. 29 Lanko Colorgrout+ USE CHARACTERISTICS PACKAGING: ́ Suitable for wall and floor tiling in joints up ́ Available in a wide range of colours. 20 kg bag to 5 to 10mm wide. ́ Prevents mould. ́ Suitable for wet areas such as swimming ́ Good adhesion to absorptive and non-ab- pools and bathrooms. sorptive surfaces. ́ In special areas like kitchens, hospitals ́ Does not stain tiles. and cleanrooms where a stain and fungal ́ Excellent ultra-violet (U.V.) resistance. resistant joint filler is required. ́ Waterproof*. Lanko-572 USE CHARACTERISTICS PACKAGING: ́ Interior and exterior walls ́ Suitable for large-size tiles up to 10 000 cm2 25 kg bag ́ Interior and exterior floors ́ Fibre-enriched: crack-resistant ́ Ideal for slim tiles ́ Single-component ́ Versatile Lanko EA USE CHARACTERISTICS PACKAGING: ́ Water cleanable, fresh grout can be easily ́ Flexible and waterproof. 20 kg kit cleaned with water eliminating expensive ́ Durable. Weather and shock resistant. solvents and harsh cleaning solution that ́ Odorless, non-toxic, non-flammable. may attack the grout. ́ Long open time. ́ Superior adhesion to wide variety of ́ Exterior and interior application. substrates. ́ Can be applied on damp surface. ́ Excellent chemical resistance to dilute ́ Water cleanable acids, alkalies, oils, grease, detergents, ́ VOC 25 Gms/Ltr cleaning solutions, etc. ́ High compressive, tensile, and bond strength. ́ Can be used in contact with food or potable water. Lanko EG USE CHARACTERISTICS PACKAGING: ́ Water cleanable, fresh grout can be easily ́ Flexible and waterproof. 14 kg kit cleaned with water eliminating expensive ́ Durable. Weather and shock resistant. solvents and harsh cleaning solution that ́ Odorless, non-toxic, non-flammable. may attack the grout. ́ Long open time. ́ Superior adhesion to wide variety of ́ Exterior and interior application. substrates. ́ Can be applied on damp surface. ́ Excellent chemical resistance to dilute ́ Antibacterial & Antifungus acids, alkalies, oils, grease, detergents, ́ Non-sagging & Stin Resistance cleaning solutions, etc. ́ Water Cleanable up to 60 minutes ́ High compressive, tensile, and bond ́ VOC 35 Gms/Ltr strength. ́ Can be used in contact with food or potable water. Lanko PRC 1 USE CHARACTERISTICS PACKAGING: LANKO RUSH COAT PRC-1 is ready mixed ́ Ready to Use 40 kg bag mortar based on mineral bonding agent used ́ Good Adhesion for preparing surfaces before the rendering. it ́ Durable improves the adhesion of new plaster, cement render, applied on masonry block and fair face concrete. The PRC-1 can be applied traditional- ly by hand using a Tyrolene. 30 Lanko PRC 2 USE CHARACTERISTICS PACKAGING: ́ Ready to Use 40 kg bag LANKO PRC-2 is ready mixed mortar based on mineral bonding agent used for preparing ́ Good Adhesion surfaces before rendering. It improves adhesion ́ Durable of new plaster, cement render, applied on the masonry block & regular block. The PRC-2 applied traditionally by hand using a Tyrolene. Lanko PP-1 USE CHARACTERISTICS PACKAGING: ́ The plaster is now ready for application by ́ Ready to use 40 kg bag machine or manually with a plastering trowel. ́ Good workability Apply the plaster on the prepared surface at a ́ Good adhesion thickness between 10 and 20 mm in one layer. ́ Durable ́ Finish the surface with a soft synthetic ́ Suitable for regular and AAC blocks sponge and a steel float. ́ Let the product set properly on the surface before any curing. ́ If more thickness is required, the application should be done in 2 layers. Let the first layer rough. Cure it. Apply the second layer at least 48 hrs after the first one. Lanko TB-F USE CHARACTERISTICS PACKAGING: ́ Internal or external laying of A.A.C. (Aerated ́ Easy Application 40 kg bag Autoclaved) blocks or the equivalent. ́ Suitable for temperatures of +5°C to +45°C ́ Cost Effective, & Good Open Time ́ VOC (<10μg/lt) Lanko TB-F+ USE CHARACTERISTICS PACKAGING: ́ Internal & External laying of Concrete blocks ́ Easy Application 40 kg bag or the equivalent. Void filling grout of Con- ́ Suitable for temperatures of +5°C to crete blocks or the equivalent. +45°C ́ Cost Effective ́ Good Open Time Lanko Granatech USE CHARACTERISTICS PACKAGING: ́ Grouting large areas. ́ Quick to apply, High strength 25 kg bag ́ Laying cropped setts. ́ Economical & cost-effective ́ Suitable for pedestrian traffic at 2hrs. ́ Aesthetically pleasing finish ́ Suitable for vehicular traffic at 6hrs ́ Hydraulic binders chloride free ́ Grey powder ready to mix ́ Aggregate size: 0-2 mm ́ Hardened density: 2.2 ́ Pot life: 45 mins 31 Lanko FBC USE CHARACTERISTICS PACKAGING: ́ Contact surfaces must be sound, clean and ́ BS 7533 Compliant 25 kg bag provide a good mechanical key. Remove ́ Cost Effective any loose material, laitance, plaster, paint ́ Available in Bulk Silos or bags and oily deposits. Lanko Monodecor GT USE CHARACTERISTICS PACKAGING: ́ The substrate must be clean, sound, dust- ́ Fine finish single-coat 30 kg bag. ́ Scraped, float or rustic finish Disposable wrapped free and without any traces of plaster or palette of 40 bags paint. ́ Waterproof at 10mm thickness ́ Planimetry and plumbline must be compli- ant with building regulations in force. ́ On concrete and non-absorbent substrates apply arough coating made up by adding 1 litre of LANKO 751 bonding agent to the mixing water for a 30kg bag of MONO- DECOR GT. Lanko Ceramic Coating USE CHARACTERISTICS PACKAGING: Cement mortar, concrete, PC slab wooden, ́ Outstanding texture granite 25KG Drum metal and various other surfaces are suitable ́ Easy and fast application for Parex Ceramic coating application so long ́ Time resistant as the surface is leveled, free from dust and ́ Economical (Low consumption applicators follow our substrate preparation guidance. If you have any doubt, please con- tact our technical department. Lanko PCK USE CHARACTERISTICS PACKAGING: Cement mortar, concrete, PC slab wooden, ́ Outstanding texture granite 27KG Drum metal and various other surfaces are suitable ́ Easy and fast application for Parex PCK application so long as the sur- ́ Time resistant face is leveled, free from dust and applicators ́ Excellent abrasion resistance follow our substrate preparation guidance. If you have any doubt, please contact our tech- nical department 32 Lanko Magic Grantie USE CHARACTERISTICS PACKAGING: Cement mortar, concrete, PC slab wooden, ́ Oustanding texture granite 27KG Drum metal and various other surfaces are suitable for ́ Easy and fast application Parex PCK application so long as the surface is ́ Time resitant leveled, free from dust and applicators follow our ́ Excellent abrasion resistance substrate preparation guidance. If you have any doubt, please contact our technical department. Lanko Stony Coating USE CHARACTERISTICS PACKAGING: Cement mortar, concrete, PC slab wooden, ́ Outstanding texture granite 27KG Drum metal and various other surfaces are suitable for ́ Easy and fast application Parex PCK application so long as the surface is ́ Time resistant leveled, free from dust and applicators follow our substrate preparation guidance. If you have any doubt, please contact our technical department. Parexal USE CHARACTERISTICS PACKAGING: ́ Permissible substrates ́ Substrate-friendly restoration render 30KG bag ́ Low elasticity modulus Pallet containing ́ Old masonry, e.g. quarry stone, brick, 40 Bags (1200 KG) natural stone (including soft stone as- ́ High lime content sembled with weak mortar) compliant ́ Suitable for large thickness with DTU 26.1 ́ Application: 10 mm to 5 cm ́ Earth-based constructions: e.g. pisé, ́ Compressive strength: CS I adobe, rammed earth, cob, witchet, ́ Water absorption: W2 clinker ́ Reaction to fire: A1 ́ Masonry with plaster or lime mortar ́ Apparent density: 1 400 kg/m3 pre-treated with GOBETIS SPECIAL A ́ Modulus of elasticity: ≤ 2 700 MPa ́ Masonry coated with traditional ren- ́ Tensile strength (average at 28 days): der/mortar compliant with DTU 26.1 1 MPa ́ New masonry: concrete, concrete ́ Water retention: 96% blocks, Rt3 and Rt2 bricks ́ High water vapour permeance: ́ PARINTER RENOVATION ́ Above 0.8 g/m².h.mm.Hg ́ Concrete ́ Water vapour permeability*: μ 10 approx. ́ Permissible substrates ́ Sd value: 0.10 m approx. (for 10 mm thickness) ́ Plaster/Gypsum based substrates ́ Water-resistant substrates ́ Pure hydrated lime coatings ́ Paint and thick acrylic coatings ́ Inclined or horizontal substrates ́ Cellular concrete 33 REFURBISHMENT SOLUTIONS 34 Sika AnchorFix®- 1N USE CHARACTERISTICS PACKAGING: 300 ml standard Sika AnchorFix®-1 N may only be used by ́ Fast curing cartridge 12 cartridges experienced professionals. As a fast curing ́ Standard guns can be used per box anchoring adhesive for all grades of: ́ Can be used at low temperatures pallet: 84 boxes ́ ETA to ETAG 029 for anchoring in masonry ́ Rebars / reinforcing steel ́ Non-sag, even overhead ́ Threaded rods ́ Styrene-free ́ Bolts and special fastening systems ́ Low odour In the following substrates: ́ Low wastage ́ Hollow and solid masonry ́ Hard natural stone* ́ Solid rock* * These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 N Adhesive must be tested by first applying Sika AnchorFix®-1 N Adhesive only to a sample area. Check in particular bond strength, surface staining and discoloration SikaTop® Armatec®-110 EpoCem® USE CHARACTERISTICS ́ Contains EpoCem® technology - improved PACKAGING: ́ Suitable for control of anodic areas 20 kg: A (1.14 kg) + B (Principle 11, method 11.1 EN 1504-9) bonding agent (2.86 kg) + C (16 kg) ́ Suitable in concrete repair as corrosion ́ Extended open times for repair mortars protection for reinforcement. ́ Compatible with most Sika® repair mortars ́ Suitable as a bonding primer on concrete ́ Excellent adhesion to concrete and steel and mortar ́ Contains corrosion inhibitor ́ Certified for application under dynamic load conditions ́ Good resistance to water and chloride pene- tration ́ High shear strength ́ Long pot life ́ Easy to mix ́ Can be brushed on or applied using spray gun Sika AnchorFix®-2+ Tropical USE CHARACTERISTICS PACKAGING: ́ Fast curing 300 mL standard Sika AnchorFix®-2+ Tropical may only be used cartridge 12per box by experienced professionals. ́ Standard guns can be used ́ Medium to high load capacity Pallet: 75 boxes As a fast curing anchoring adhesive for all ́ ETA Approval available Component A Grey grades of: ́ Suitable for cracked concrete Component B Off-white Component A + B mixed ́ Rebars / reinforcing steel ́ Drinking Water certified Light grey ́ Threaded rods ́ LEED Attestation available ́ Bolts and special fastening systems ́ Non-sag, even overhead ́ Concrete ́ Styrene-free ́ Solid masonry ́ Low odour ́ Steel ́ Low wastage Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: ́ Hard natural stone ́ Solid rock 35 Sika Anchorfix®-3001 USE CHARACTERISTICS PACKAGING: ́ Long Open Time 250 ml standard Sika AnchorFix®-3001 may only be used by experi- cartridge 12 cartridges enced professionals. ́ Can be used in damp concrete per box ́ High load capacity For the fixing of non-expanding anchors in the ́ ETA to ETAG 001 for anchoring in cracked pallet: 75 boxes following: concrete 400 ml side by side Structural work: ́ ETA to ETAG 001 for rebar connections cartridge 12 cartridges ́ Rebar / steel reinforcement anchoring in new ́ ESR to AC308 by ICC-ES, anchoring in per box and refurbishment works cracked concrete for static, wind and earth- pallet: 60 boxes ́ Threaded rods quake loading ́ Bolts and special fastening / fixing systems ́ ERto AC308 by IAPMO UES, anchoring in 600 ml side by side ́ Metalwork, carpentry: cracked concrete for static, wind and earth- cartridge 12 cartridges ́ Fixing of handrails, balustrades and supports quake loading per box ́ Fixing of railings ́ Drinking Water certified pallet: 36 boxes ́ Fixing of window and door frames ́ LEED Attestation available ́ Fire resistance test report available In the following substrates: ́ Seismic testing available ́ Concrete (cracked and un-cracked) ́ Styrene-free ́ Hollow and solid masonry ́ Excellent adhesion to the substrate ́ Wood ́ Shrinkage-free hardening ́ Hard natural and reconstituted stone* ́ Standard guns can be used (with the 250ml ́ Solid rock* cartridge) * These substrates may vary greatly, in particular ́ Low odour with regard to strength, composition and poros- ́ Low wastage ity. Therefore, for each application the suitability of Sika AnchorFix®-3001 Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration. Sikadur®-32 Normal USE CHARACTERISTICS PACKAGING: Sikadur®-32 Normal has the following 5 kg (A+B) As a structural bonding agent and adhesive for: Pre-batched unit ́ Concrete elements (including bonding fresh advantages: to hardened concrete) ́ Easy to mix and apply ́ Hard natural stone ́ Suitable for dry and damp concrete surfaces ́ Ceramics, fibre-cement ́ Very good adhesion to most construction ́ Mortar, Bricks, Masonry materials ́ Steel, Iron, Aluminum ́ High Bond Strength ́ Wood ́ Hardens without shrinkage ́ Polyester / fiberglass and Epoxy resin ́ Different coloured components (for mixing materials control) ́ Glass ́ No primer needed ́ High initial and ultimate mechanical strength ́ Impermeable to liquids and water vapour ́ Good chemical resistance SikaLatex®-100 P QA USE CHARACTERISTICS PACKAGING: SikaLatex-100 P QA is used as bonding agent ́ SikaLatex-100 P QA is simply added to the 20 L pails, and site- mix mortar admixture for the follow- mixing water to improve the following prop- 200 L drums ing applications: White liquid erties: ́ Thin layer patching mortars ́ Adhesion ́ Renders ́ Shrinkage ́ Floor screeds ́ Water resistance ́ Concrete repair mortars ́ Abrasion resistance ́ Abrasion resistant linings ́ Chemical resistance ́ Tile fixing mortars SikaLatex-100 P QA is non-corrosive, ready to ́ Masonry mortars use and does not re-emulsify, even under highly ́ Bonding slurry for fresh to old concrete alkaline conditions. 36 Sikagrout®-214 QA USE CHARACTERISTICS PACKAGING: SikaGrout®-214 QA is an easy to use grout 25 kg bags SikaGrout®-214 QA precision grout is used for Grey powder requiring only the addition of water. It offers the grouting in the following: following beneficial properties: ́ Machine Foundations ́ Easy to mix ́ Columns in pre-cast construction ́ Good flow characteristics ́ Base plates ́ Dual expansion system ́ General concrete repairs ́ Adjustable consistency ́ Joint nosing ́ High early and final strengths ́ Bridges bearing pads ́ Non-corrosive and iron-free Lanko NSG USE CHARACTERISTICS PACKAGING: ́ Non-shrink. 25 kg bags ́ Bedding of industrial equipment, rebars, Grey powder anchor bolts. ́ Good workability. ́ Assembling of precast panels, grip-filling. ́ Easy application ́ Bearing casting of heavy machinery, column, ́ Excellent compressive strength crane rails. ́ Repairing of concrete structure. Sikagrout®-114 QA USE CHARACTERISTICS PACKAGING: 25 kg bags SikaGrout®-114 QA is used for grouting in the SikaGrout®-114 QA is an economical and easy to Grey powder following: use grout requiring only the addition of water. It offers the following beneficial properties: ́ Machine foundations ́ Easy to mix ́ Columns in pre-cast construction ́ Good flow characteristics ́ Concrete anchors, cavities, gaps and ́ Dual expansion system recesses ́ Adjustable consistency ́ Base plates ́ High final strengths ́ General concrete repairs ́ Non-corrosive and iron-free ́ Bridge bearings pads Sikadur®-42 MP Slow QA USE CHARACTERISTICS ́ High early strength PACKAGING: Sikadur®-42 MP Slow QA may only be used 12 kg (A+B+C) by experienced professionals. High-strength ́ Ready-to-mix, pre-batched units 30 kg (A+B+C) grouting and fixing of: ́ Moisture tolerant Pre-batched unit for ́ Non-shrink ́ Starter bars each ́ Corrosion and chemically resistant ́ Anchors ́ Stress and impact resistant ́ Fasteners Concrete Grey ́ High compressive strength ́ Tie rods ́ High vibration resistance ́ Crash barrier posts ́ Low coefficient of thermal expansion ́ Fence and railing posts Under-grouting and bedding of: ́ Base plates ́ Machine bases, seat base-plates for light and heavy machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. ́ Bridge bearings ́ Mechanical joints (i.e. road/bridge/deck types etc.) Sleeper-less, direct rail fixing: ́ Crane tracks ́ Light rail and permanent way in tunnels ́ Light rail and permanent way over bridges 37 Sika Monotop®-612 QA USE CHARACTERISTICS PACKAGING: Sika MonoTop®-612 QA provides the following 25 kg bags Sika MonoTop®-612 QA is used for structural Grey powder repair work and suitable for: beneficial properties: ́ Structural repair ́ Restoration works, repair of spalling and ́ Rapid strength gain and high final strength damaged concrete in buildings, bridges, ́ Good water and oil resistance infrastructure and superstructure works ́ Low shrinkage behavior ́ Structural strengthening by increasing the ́ High abrasion resistance bearing capacity of the concrete structure ́ Good adhesion by adding mortar (section enlargement) ́ Easy to apply ́ Preserving or restoring passivity by increas- ́ Application up to 60 mm in 1 layer ing cover with additional mortar and replac- ́ Low permeability ing contaminated or carbonated concrete Sika Monotop®-625 Fine QA USE CHARACTERISTICS PACKAGING: ́ Easy to use; mix with water only 20 kg bags ́ Pore sealer / finishing coat on cementitious Grey powder substrates ́ User friendly application; excellent workability ́ Thin layer render coat on horizontal and ́ Good mechanical strengths vertical areas in building and civil engineer- ́ Sprayable by the wet-spray method ing construction, for external and internal ́ Non-corrosive, non-toxic finishing etc. ́ Adjustable consistency ́ Levelling mortar on uneven substrates, and ́ High bond strength profiled concrete surfaces. ́ Fine repair mortar to fill honeycombs, pores etc. ́ Repair mortar for repair of small defects on edges and joint sides; to form and finish joints and covings Lanko Skimcoat 113 USE CHARACTERISTICS PACKAGING: ́ Application thickness : 0.5-10 mm. 25 kg bags Interior and exterior walls and ceilings. ́ Adjustable consistency. ́ Reinforced concrete. ́ Good trowelability on application. ́ Precast concrete panels. ́ No primer required. ́ Traditional rendering ́ Compatible with decorative ́ VOC - none (<10μg/lt) Lanko 731 USE CHARACTERISTICS PACKAGING: ́ Application thickness: 5-50 mm. 25 kg bags ́ Repair of concrete surfaces: spalling, hon- eycombing, stair nosing, ramp, etc. ́ Thixotropic. ́ Concrete restructuring: pillars, slabs, posts, ́ Strong bonding. dam aprons and spillways, etc. ́ High initial and final mechanical strength. ́ Reinforcement of weakened structures: ́ Excellent resistance to sea water and sulphat- balconies, overhangs, cornices. ed waters. ́ Treatment of chamfers and seams prior to ́ Contact possible with drinking water. waterproofing. ́ VOC - none (<10μg/lt) Lanko Skim 110 USE CHARACTERISTICS PACKAGING: ́ For interior and exterior walls and ceilings. 20 kg bag Interior and exterior walls and ceilings. ́ Easy to use. ́ Reinforced concrete. ́ Perfectly smooth finish. ́ Precast concrete panels. ́ Adjustable consistency. ́ Traditional rendering ́ Good trowelability on application. ́ No primer required. ́ Compatible with decorative wall-coverings. ́ Application thickness: 0.5 to 3 mm 38 Sikacrete®-113 PP QA USE CHARACTERISTICS PACKAGING: ́ One component, requires the addition of 25 kg bags ́ Sikacrete -113 PP QA used for the structur- Grey powder al repair of deteriorated concrete. water only ́ It is ideal for casting sections or members ́ Reduced waste and risk of mixing failures where the volumes required are too large ́ Easy to mix, apply and finish for conventional grouts, and too small ́ Economical Excellent adhesion Shrinkage and inaccessible for normal concreting compensated Rapid strength development applications. ́ Compatible with the properties of typical ́ A typical application is the re-profiling of concrete damaged concrete members and reprofil- ́ Vapour permeable High resistance to freeze/ ing of pile tops using formwork for both thaw cycling pouring and pumping techniques. ́ Excellent flowability Sikacrete®-114 QA USE CHARACTERISTICS PACKAGING: 25 and 40 kg bags Sikacrete®-114 QA is used for the structural ́ One component, requires the addition of Grey powder repair of deteriorated concrete. It is ideal water only for casting sections or members where the ́ Reduced waste and risk of mixing failures volumes required are too large for convention- ́ Easy to mix, apply and finish al grouts, and too small and inaccessible for ́ Economical normal concreting applications. ́ Excellent adhesion ́ Shrinkage compensated A typical application is the re-profiling of dam- ́ Rapid strength development aged concrete members, using formwork. ́ Compatible with the properties of typical concrete ́ Vapour permeable Sikadur®-31 CF Slow/Normal USE CHARACTERISTICS ́ Easy to mix and apply PACKAGING: Sikadur®-31 CF Slow/Normal may only be used 1 kg and 5 kg units by experienced professionals. As a structural ́ Very good adhesion to most construction (A+B) adhesive and mortar for: materials Normal: ́ High strength adhesive ́ Concrete elements 6 kg (A+B) Pre-batched ́ Thixotropic: non-sag in vertical and overhead ́ Hard natural stone unit applications Pallets 480Kg (80X6) ́ Ceramics, fiber cement ́ Hardens without shrinkage 1.2 kg (A+B) Pre- ́ Mortar, Bricks, Masonry ́ Different coloured components (for mixing batched unit ́ Steel, Iron, Aluminum control) box of 6 x 1.2 kg ́ Wood ́ No primer needed ́ Polyester, Epoxy ́ High initial and ultimate mechanical strength ́ Glass ́ Good abrasion resistance As a repair mortar and adhesive: ́ Impermeable to liquids and water vapour ́ Corners and edges ́ Good chemical resistance ́ Holes and void filling ́ Vertical and overhead use Joint filling and crack sealing: ́ Joint and crack arris / edge repair 39 Sikagard®-700 S QA USE CHARACTERISTICS PACKAGING: ́ Reduction of capillary water absorption 20 L cans ́ Sikagard®-700 S QA is used as a water ́ Reduces efflorescence repellent and colourless protective surface ́ Reduces dirt penetration into the pores treatment absorbent exposed materials such ́ Improves thermal insulation as concrete, Cementitious rendering, concrete ́ Can be over coated with solvent based and tiles, fibre cement, brickwork (clay and lime dispersion coatings sand, non-vitrified), natural stone etc. ́ Higher durability and resistance than con- ́ Sikagard®-700 S QA can also be used as hydro- ventional silicone based treatments phobic primer under solvent based or emulsion ́ Does not usually change the appearance of based protective coatings. the substrate ́ Sikagard®-700 S QA is used as water-repellent ́ Does not act as a vapour barrier impregnation (hydrophobic treatment) for absorbent substrates such as concrete in civil engineering or building concrete structures. ́ Suitable for protection against ingress (Princi- ple 1, method 1.1 of EN 1504-9) ́ Suitable for moisture control (Principle 2, method 2.1 of EN 1504-9) ́ Suitable for increasing the resistivity (Principle 8, method 8.1 of EN 1504-9) Sikagard®-705 L USE CHARACTERISTICS PACKAGING: ́ Excellent penetration 25 L Pail ́ Sikagard®-705 L is used as water-repellent 200 L Drum ́ Fast uptake even on dense concrete impregnation (hydrophobic treatment) for ́ Economic and easy to use absorbent substrates such as concrete in civil ́ Reduces capillary water absorption, engineering or building concrete structures protection against driving rain and subjected to heavy stress due to freeze and splashing on vertical areas thaw cycles and de-icing salts and chloride ́ Reduction of absorption of aggressive or attack in marine environment ́ deleterious agents dissolved in water (i.e. de-icing salts ́ Suitable for protection against ingress (Princi- or chloride from marine environment) ple 1, method 1.1 of EN 1504-9), ́ No change in water vapour permeability ́ Suitable for moisture control (Principle 2, ́ Long term efficiency, deep penetration method 2.1 of EN 1504-9) ́ Increases the resistance of concrete to freeze and thaw ́ Suitable for increasing the resistivity (Principle cycles and de-icing salts 8, method 8.1 of EN 1504-9) ́ Reduce corrosion even in cracked concrete ́ Retard corrosion initiation by reducing the available humidity at reinforcement bars level ́ Mitigate corrosion by preventing further chloride to migrate to reinforcement bars ́ Comply with Dutch guidelines (RWS NEN-EN 1504-2) on CEM III. Resistant to sea water. Low VOC content. ́ Ready to use Sikagard®-720 Epocem USE CHARACTERISTICS PACKAGING: ́ Better chemical resistance than a PCC Pre-dosed 21 kg sets. ́ As a levelling layer over concrete and mortars Part A: 1.14 kg plastic in 0.5 - 3 mm on vertical or horizontal surfaces. mortar container ́ Application in new works or damaged con- ́ Excellent protection of concrete in aggres- Part B: 2.86 kg plastic crete, in aggressive chemical environments sive environments container ́ Application over high moisture content sub- ́ CE certified in accordance with EN 1504 Part C: 17.0 kg plastic or strates, even green concrete parts 2 and 3 aluminium lined double ́ As a Temporary Moisture Barrier (TMB) (min. ́ Impervious to liquids but permeable to paper bags 2 mm thick) allowing the application of Epoxy, water vapour Polyurethane and PMMA* resin coatings re- ́ Excellent bond to green or hardened con- quiring dry substrates, for a lasting solution. crete whether damp or dry ́ As a pore sealer for the reprofiling, smoothing ́ Fast overcoating of Sika® resin based finish and levelling of concrete surfaces products ́ Suitable for moisture control (Principle 2, ́ Ideal preparation for smooth surface method 2.3 of EN 1504-9) finishes ́ Suitable for restoration work (Principle 3, ́ For internal or external use method 3.1 and 3.3 of EN 1504-9). ́ Contains no solvents ́ Suitable for physical resistance (Principle 5, ́ Can be applied by hand or mechanically method 5.1 of EN 1504-9) ́ Suitable for preserving or restoring passivity (Principle 7, method 7.1 and 7.2 of EN 1504-9) ́ Suitable for increasing resistivity (Principle 8, method 8.3 of EN 1504-9). 40
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-