W HO P ERFORMS A LLOY C HAIN I NSPECTIONS & H OW O FTEN ? INTRODUCTION It is the only Chain grade recommended option used in overhead lifting equipment, alloy chain slings, and binder too Alloy steel, Heat treated 25 % stronger than Grade 80 Alloy Chain Alloy chain inspect and document at a minimum of 12 - months of periods All inspection should be performed by an inspection expert who can identify the problems and what steps needs to be taken to prevent any hazard FIRST INSPECTION : First inspect the chain after receiving it from the manufacturer is very important Cross - check the tag to ensure that what you ordered and that the ratings meet all of your project characteristic and lifting requirements FREQUENT : Hire an expert to perform a regular optical investigation of damage, defects and other issues on joints and fastenings Shock loads, severe angles, edges and excessive heat can quickly damage a Chain sling, so it is necessary to do a visual inspection before shift change or in lifting Uses AT FIX PERIOD : This Inspection is done by a professional Technician Factors that matters in inspection at Fix timing : 1. Multiple time uses 2. The badness of service conditions 3. Nature of the lifts being performed 4. Experience gained on the service life of wire rope slings used in similar applications WWW.ROMAENT.COM Tel: +971 4 2236724 Fax: +971 4 2274669