optional closures B1 PURSE A6 B2 FLAP A5 C1 D1 optional purse feet C2 BOTTOM D2 E1 BACK A1 PANEL A2 FRONT STRAP COVERS F1 INSIDE E2 optional purse feet F2 POCKET A3 FRONT rivets A4 PANEL rivets FULL VIEW LAYOUT DIRECTIONS 1. Print pattern to actual size using adobe acrobat reader. 2. Cut pattern across dotted lines and tape pattern together. 3. attach inside pocket to flesh side of the back panel (a1 & a2). 4. attach purse feet to bottom panel if using purse feet (otional) and attach bottom panel to the bag. 5. attach front flap to the bag, and choose your closure style, any style will work and line to center. Do not put your secondary closure to the front of bag yet, we will line that up last. 6. cut straps at 1” to however long you would like, i set mine at 36”. 7. thread the strap through the back and front of bag so the nice portion (none flesh) is toward front of bag. Rivet the straps on, and trim tips of strap if needed to not cover holes 8. attach strap covers 9. attach the side gussets to the bag 10. line up your closure system and attach to the bag. 11. grab a beer.