Tip and Tricks for Maintaining Water Filtration Systems An excellent first step in ensuring that you and your family have clean, hygienic water is purchasing and installing home water purifiers. Some home water filtration system maintenance is necessary if you want to keep your faucet's flow fresh. The guidelines listed below will help you keep your whole-house or under-sink filtration system operating properly. Simple Maintenance Tasks for Home Water Filtration Systems Replacing the filter is the simplest way to ensure that your faucet is dispensing filtered water. Sediment that is caught by filters over their lifetimes soon builds up. While under-sink systems can use the same filter for up to six months, whole-home cartridge filters can last up to three or six months before needing to be changed. The amount of water you use and the quality of your water will determine when you need to change the filter. If an outdated filter is kept in the system for any longer than that, sediment may pass through it since it is unable to contain any more material. How to Replace the Filter in a Whole Home System Whole-home filtration systems are excellent for homes where an overabundance of silt in the water is slowing down water-using appliances and internal pipe damage. The simplest water filtration system maintenance is as simple as replacing the filter on a regular basis. The filter for this entire home system can be changed as follows: 1. Take hold of the sump's bottom and carefully raise it. 3. Over a sink or waterproof surface, unsnap the lid clamp by pulling the latches in opposing directions; do not remove the clamp halves. 2. Pull the sump down to remove it from the head. 4. Remove the cover from the sump and take out the used filter cartridge. 5. Discard the previous filter. 6. Verify that the sump is dry and debris-free. 7. Take off the protective caps from the replacement filter, then place the new cartridge into the sump. 8. Align the filter cartridge in the sump so that its two triangular points line up with the sump's notch. 9. Reattach the lid, reattach the latches, reinstall the filter ports, and return the pivot to the service position. Before a vacation, maintain the whole house filtration system There are various options available to you if your house will be empty for longer than a month. To prevent the filtration unit from receiving any additional water, you can first switch off the water supply to your home. Additionally, disable the Clean Rinse feature to avoid having the same water filtered every 14 days. When you go home and utilise the water, we advise performing two filtering cycles manually if you decide to disable the Clean Rinse feature.