1. DEFINITION This 'Emergency Stop' switch is called a Pull cord switch. It clings to the side of the conveyor belt or other machines. In the emergency, the worker can stop the operation of the conveyor belt or other machines by pulling the wire rope connected to pull cord switches. 2. OPERATION 1) Indicator plate(Red color) is placed horizontally during the normal operation.(Fig.2) 2) In the case of emergency, the worker pulls a wire rope. Then, the Indicator plate is placed vertically. (Fig.1) 3) To return on to normal operation of switch after emergency, please push the Indicator plate in clockwise rotation with small force. Then, the indicator plate will be returned. (Fig.2) 4) When the indicator plate is placed wrongly (Fig.3), please pull the lever until indicator plate is placed vertically as shown on Fig.1. And then, please push the Indicator plate in clockwise rotation with small force. 5) Please be cautious not to give big impact to locker by hand. The impact on locker may cause the damage and breakdown of switch. 6) When the case shown on Fig.3, please be cautious not to give too much force to Indicator plate. It can cause the damage and breakdown of holder hinge. 7) Recommended interval of switch for installation is 20-40mm. 8) Accessories like wire rope, wire clip and eye bolt are supplied with switches. It is recommended to install eye bolts every 2.5m. Eye bolts will prevent the drop of wire rope. 3. WIRING