Technical Datasheet - PCCF Pro Print settings recommendations: Typical material properties (2) 24 °C; humidity 35 % Mechanical properties of 3D printed testing specimens Typical Value Nozzle temp 250-285 Bed temp 90-120 Fan speed (normal) 10-50 Fan speed (overhangs) 70-90 Spool weight 220g Typical Value Method Density [g/cm 3 ] 1.24 ISO 1133 Moisture Absorption in 24 hours [%](2) 0.15 Proprietary Moisture Absorption in 7 days [%](2) 0.38 Proprietary Heat De fl ection Temperature (0.45 MPa) [°C] 123 ISO 75 Heat De fl ection Temperature (1.80 MPa) [°C] 112 ISO 75 Tensile Yield Strength for Filament [MPa] 66 ± 2 ISO 527 Interlayer Adhesion [MPa] 29 ± 2 Proprietary Property\Print Direction Horizontal Vertical xz Method Tensile Yield Strength [MPa] 59 ± 4 65 ± 4 ISO 527-1 Tensile Modulus [GPa] 2.6 ± 0.1 2.9 ± 0.1 ISO 527-1 Elongation at Yield Point [%] 4.1 ± 0.5 4.2 ± 0.4 ISO 527-1 Flexural Strength [MPa] 87 ± 1 101 ± 1 ISO 178 Flexural Modulus [GPa] 5.2 ± 0.1 5.2 ± 0.1 ISO 178 De fl ection at Flexural Strength [mm] 9.1 ± 0.2 7.1 ± 0.2 ISO 178 Impact Strength Charpy [kJ/m 2 ](4) 28± 6 33 ± 3 ISO 179-1 Impact Strength Charpy Notched [kJ/m 2 ](5) 8± 1 9 ± 1 ISO 179-1 These samples were printed on a Prusa i3MK3S+ using Superslicer 2.3.57.12 and the following settings: • 100% rectilinear in fi ll • 0.2mm layer height • 2 perimeters • 3 solid top/bottom layers • In fi ll Print Speed 200 mm/s; • Nozzle Temperature 265 °C all layers • Bed Temperature 115 °C all layers • Extrusion Multiplier 1.06 • Print cooling 10% Disclaimer: The results shown in this data sheet are subject to a variety of factors, and cannot be relied upon for mission critical applications. These values are dependent on print settings, environmental conditions and other external factors. Before using any material, consider the data sheet and conduct appropriate testing