1 / 7 Esri EAPF_2025 Exam Esri ArcGIS Pro Foundation 202 https://www.passquestion.com/eapf_2025.html 35% OFF on All, Including EAPF_2025 Questions and Answers P ass EAPF_2025 Exam with PassQuestion EAPF_2025 questions and answers in the first attempt. https://www.passquestion.com/ 2 / 7 1.A point feature class has a correctly defined projected coordinate system. A partner needs a new feature class whose coordinates are stored in a different projected coordinate system using the same geographic datum. The original feature class must remain unchanged. Which action meets this requirement? A. Use Define Projection to assign the requested coordinate system to the original feature class. B. Use Project to create an output feature class in the requested coordinate system. C. Change the map coordinate system to the requested coordinate system and save the project. Answer: B Explanation: The requirement is to transform the stored coordinates and write a separate dataset. Project creates an output in the specified coordinate system, leaving the input feature class unchanged. The shared geographic datum keeps this question focused on projection rather than datum transformation. ● Why A is incorrect: Define Projection changes the coordinate system information associated with the data; it does not transform the geometry. The input definition is already correct, so replacing it would misdescribe the existing coordinates. ● Why C is incorrect: Changing the map coordinate system changes how data is displayed in that map. It does not create the requested feature class with transformed stored coordinates. Key distinction: Distinguish a dataset's coordinate system definition, its stored coordinates, and the coordinate system used to display a map. Review: Project — Summary and Parameters; Define Projection — Usage; Coordinate systems, projections, and transformations. 2.A feature layer references an editable feature class in a file geodatabase. Its current records are shown below. The analyst uses this layer as the input to Calculate Field, setting the existing text field Status to Reviewed. The calculation succeeds, and the selection remains as shown. Which records in the source feature class now have Status set to Reviewed? AssetID Selected Status before calculation 101 Yes Pending 102 No Pending 103 Yes Pending 104 No Pending A. All four records: 101, 102, 103, and 104. B. Only the unselected records: 102 and 104. C. Only the selected records: 101 and 103. Answer: C Explanation: Calculate Field uses the selected records when its input is a layer with a selection. It updates the input data, so records 101 and 103 in the source feature class receive Reviewed. Records 102 and 104 retain Pending. This is an attribute change, not just a display change. ● Why A is incorrect: This treats the selected layer as though all records were being processed. The stated input and selection limit this calculation to the selected records. ● Why B is incorrect: The operation uses the selection as given; it does not invert it. The unselected 3 / 7 records are outside this calculation. Key distinction: Before calculating a field, check both the input object and the active selection: they determine which source records are changed. Review: Calculate Field — Usage: selected records and modification of input data. 3.In a two-dimensional map, a building layer is configured to draw at scales of 1:50,000 and larger, with no limit on how far the user can zoom in. Its scale range is enabled. Which map scale is within this visibility range? A. 1:25,000 B. 1:100,000 C. 1:250,000 Answer: A Explanation: Map scales are ratios. With the numerator fixed at 1, a smaller denominator represents a larger scale. Therefore, 1:25,000 is larger than 1:50,000 and falls within the stated range. ● Why B is incorrect: 1:100,000 is a smaller scale than 1:50,000, so it is outside the permitted zoomed- out range. ● Why C is incorrect: 1:250,000 is smaller still and is also outside the range. Key distinction: Larger scale means more zoomed in and a smaller denominator; larger denominator means smaller scale. Scale visibility controls drawing, not deletion of features. Review: Display layers at certain scales — Set a visible scale range for a layer in a map. 4.A city has road centerlines in a projected coordinate system suitable for local distance measurements. An analyst needs a new polygon feature class representing the area within 200 meters of those lines. Which geoprocessing tool produces the required geometry? A. Clip B. Buffer C. Merge Answer: B Explanation: Buffer creates polygons around input features at a specified distance. Applying a 200-meter buffer to the road lines produces the required proximity areas. ● Why A is incorrect: Clip extracts the portions of input features that fall within clipping features. It does not create a distance-based area around the road lines. ● Why C is incorrect: Merge combines input datasets into one output dataset. Combining road lines does not generate the surrounding 200-meter polygons. Key distinction: Use the required output to distinguish tools: a proximity area calls for Buffer; extracting by a boundary and combining datasets are different tasks. Review: Buffer — Summary and Parameters; Clip — Summary; Merge — Summary. 5.You own a web map and an existing hosted feature layer that it references in ArcGIS Online. The web map is shared with your organization, but the feature layer is shared only with its owner. A colleague in the organization has no administrator role or special access privileges. The colleague can open the map but cannot view that layer. You want members of the organization to view the layer without making it 4 / 7 public. Which change meets this requirement? A. Change only the web map's sharing level to Everyone (public). B. Enable editing on the hosted feature layer while keeping its sharing level unchanged. C. Change the hosted feature layer's sharing level to Organization. Answer: C Explanation: The map and its referenced layer have separate access settings. Sharing the layer with the organization gives the intended members access to its content while keeping it unavailable to the public. The map is already shared with that same audience. ● Why A is incorrect: Changing only the map's audience leaves the layer restricted to its owner. It also broadens access to the map beyond the requested audience. ● Why B is incorrect: Editing settings govern permitted operations on the data; they do not give this colleague access to a layer that remains owner-only. Key distinction: Check access to both the web map and its referenced web layers. Grant the intended audience access to the dependent content as well as the map. Review: Share a web map — Sharing Level and the note about existing web layers. 6.Before reusing a feature class, an analyst wants to read the provider's documented purpose and use restrictions. The provider has completed this information in the feature class's item description. Which action provides the requested information? A. Open the Source tab of the layer's Properties dialog box. B. Select the feature class in a catalog view and read its metadata in the details panel. C. Open the General tab of the layer's Properties dialog box. Answer: B Explanation: The item description is metadata about the dataset. Viewing the feature class in a catalog view provides access to that description, including the information the provider has supplied about its intended use. ● Why A is incorrect: The Source tab describes technical properties such as the data source and spatial reference. It is not the item description. ● Why C is incorrect: The General tab includes layer settings such as its name and visibility range, rather than the provider's dataset description. Key distinction: Use metadata to understand a dataset's documented purpose and restrictions; use data properties to inspect technical characteristics. Review: View and edit metadata — View content in a catalog view; Set layer properties — General and Source. 7.An analyst has an existing project folder and needs a new file geodatabase containing an empty feature class for trail centerlines. Which workflow creates the requested storage and geometry? A. Run Create File Geodatabase, then Create Feature Class using the new geodatabase as the location and Polyline as the geometry type. B. Run Create File Geodatabase, then Create Feature Class using the project folder as the location and Polyline as the geometry type. 5 / 7 C. Run Create File Geodatabase, then Create Feature Class using the new geodatabase as the location and Polygon as the geometry type. Answer: A Explanation: Create the geodatabase first so the output location exists. Then create the feature class inside it. Polyline geometry represents trail centerlines. ● Why B is incorrect: Using the ordinary project folder as the feature class location creates a shapefile there, leaving the new feature class outside the geodatabase. ● Why C is incorrect: This places the feature class in the correct geodatabase, but Polygon represents areas rather than centerlines. Key distinction: When creating a feature class, check both its output workspace and the geometry it must represent. Review: Create a file geodatabase — Run the Create File Geodatabase tool; Create Feature Class — Summary, Usage, and dialog parameters; Feature class basics — Types of feature classes. 8.An analyst is adding an AssetCode field to a file geodatabase feature class. Codes such as 000742, 018206, and 470125 must be stored as six-character identifiers, including leading zeros. The codes are not used for arithmetic. Which field definition meets this requirement? A. Short B. Long C. Text with a length of 6 Answer: C Explanation: Text stores the code as characters, preserving its leading zeros. A length of 6 accommodates every identifier shown. ● Why A is incorrect: Short stores integer values, so it does not preserve leading zeros as part of a code. The value 470125 also exceeds its range. ● Why B is incorrect: Long accommodates these numerical values, but stores them as integers. It does not preserve the six-character identifier representation. Key distinction: Choose a field type from the meaning and storage requirements of a value, not just the characters it contains. Review: ArcGIS field data types — Numbers and Text. 9.An analyst is drawing a service line that must connect to the interior of an existing main-line segment in a two-dimensional map. Snapping is on, and the main-line layer is enabled for snapping. Near the intended connection, the segment is within the snapping tolerance, but all of its vertices are outside that tolerance. Which snap agent supports placing the new line's endpoint on the segment? A. Edge B. Vertex C. Endpoint Answer: A Explanation: 6 / 7 Edge snapping places the pointer on a nearby polyline or polygon segment. It can provide the connection here because the segment is within the snapping tolerance. ● Why B is incorrect: Vertex snapping requires a vertex within tolerance; the question states that none is available there. ● Why C is incorrect: Endpoint snapping targets a polyline's start or end. Those vertices are also outside the stated tolerance. Key distinction: Choose snapping according to the existing geometry you want to connect to, not the part of the new feature you are drawing. Review: Use snapping — Enable snap agents and snapping tolerance. 10.A Sites feature layer and a Survey table contain the hypothetical rows below. SiteID is a unique, non- null Text field in each dataset. Neither has a definition query. The Rating field exists only in Survey. The analyst will use Add Join with Sites as the input and Survey as the join table to display each site's survey rating while keeping every site in the layer. Which settings meet this requirement? Dataset ObjectID SiteID Rating Sites 1 S101 — Sites 2 S102 — Sites 3 S103 — Survey 1 S102 Fair Survey 2 S101 Good A. Match ObjectID to ObjectID, with Keep all input records checked. B. Match SiteID to SiteID, with Keep all input records unchecked. C. Match SiteID to SiteID, with Keep all input records checked. Answer: C Explanation: SiteID matches S101 to Good and S102 to Fair. Keeping all input records also retains S103, whose joined survey fields are null because it has no matching survey. ● Why A is incorrect: The ObjectID values pair different sites: Sites row 1 is S101, but Survey row 1 is S102. Retaining all rows does not correct those mismatches. ● Why B is incorrect: The site matches are correct, but S103 is excluded from the joined layer because it has no Survey record. Its source feature is not deleted. Key distinction: Choose fields that match the same entities, then decide how the join should handle unmatched input records. Review: Add Join — Summary, Usage, and Keep all input records. 11.A map already contains Roads and Land Use layers. An analyst wants to drag Roads above Land Use in the map's layer list. Which pane provides this control? A. Catalog B. Contents 7 / 7 C. Symbology Answer: B Explanation: The Contents pane lists the layers in the active map. On its Drawing Order tab, dragging Roads above Land Use makes Roads draw above that layer. ● Why A is incorrect: The Catalog pane provides access to project and portal items. It is not the map's layer drawing-order list. ● Why C is incorrect: The Symbology pane configures how features in a layer are symbolized. It does not reorder the map's layers. Key distinction: Use the Contents pane to manage the layers already in a map, including their drawing order. Review: Contents pane — Contents pane tabs; Introduction to ArcGIS Pro — Panes. 12.A point layer stores facility types in a numeric field named TypeCode: 1 means library, 2 means recreation center, and 3 means fire station. The codes identify facility types rather than amounts or ranks. Which primary symbology method is designed to assign a separate symbol to each type? A. Graduated Colors B. Graduated Symbols C. Unique Values Answer: C Explanation: TypeCode contains category identifiers even though the field is numeric. Unique Values creates symbol classes from those distinct attribute values, allowing a separate symbol for each facility type. ● Why A is incorrect: Graduated Colors groups quantitative values into ranges and represents those ranges with colors. The codes here are categories, not measurements to classify. ● Why B is incorrect: Graduated Symbols groups quantitative values into ranges represented by different symbol sizes. A code of 3 does not mean more of a facility than a code of 1. Key distinction: Choose symbology from what the values mean; a numeric field can contain categories instead of quantities. Review: Unique values — overview and setup; Graduated colors — overview; Graduated symbols — overview.