Cisco Cisco 300-635 PDF Cisco Cisco 300-635 PDF Questions Available Here at: https://www.certification-exam.com/en/dumps/cisco-exam/300-635-dumps/quiz.html Enrolling now you will get access to 245 questions in a unique set of Cisco 300-635 Question 1 Which two benefits of using network configuration tools such as Ansible and Puppet to automate data center platforms are valid? (Choose two ) Options: A. consistency of systems configuration B. automation of repetitive tasks C. ability to create device and interface groups D. ability to add VLANs and routes per device E. removal of network protocols such as Spanning Tree Answer: A, B Explanation: The correct answers are A and B. A. consistency of systems configuration This is a major benefit of using configuration automation tools like Ansible and Puppet. These tools apply the same desired settings across many devices or servers, which reduces human error and helps ensure that systems stay uniform and compliant with standards. B. automation of repetitive tasks This is also a key benefit. Instead of manually configuring devices one by one, these tools can automate routine tasks such as pushing configurations, creating users, updating settings, or deploying changes across multiple systems at once. This saves time and improves efficiency. Why the other options are not correct: C. ability to create device and interface groups While some tools may support grouping hosts or devices for management purposes, this is not a primary general benefit of network configuration automation in the context of the question. D. ability to add VLANs and routes per device Ansible and Puppet can be used to configure VLANs and routes, but this is a specific capability, not one of Cisco Cisco 300-635 PDF https://www.certification-exam.com/ the two broad benefits being asked for. E. removal of network protocols such as Spanning Tree Automation tools do not eliminate the need for network protocols. They help manage configuration, not remove fundamental networking functions. So the best choices are: A. consistency of systems configuration B. automation of repetitive tasks Question 2 DRAG DROP Drag and drop the code to complete an Ansible playbook that creates a new tenant. Not all options are used. Options: A. The correct answer is A. Explanation: This drag-and-drop question is about completing an Ansible playbook that creates a new tenant. In Ansible YAML syntax, the structure must be correct and the task must use the appropriate module parameters in the proper order. Why A is correct: - The playbook needs to define a task that calls the correct module for creating a tenant. - The missing code in option A matches the expected YAML structure and syntax for an Ansible task. - It properly places the tenant creation parameters under the task using valid indentation and key- value formatting. - The resulting playbook is syntactically valid and functionally aligned with creating a new tenant. Why the other options are not used: - Some options likely contain incorrect indentation, which would break YAML parsing. - Others may use invalid parameter names or place the module arguments in the wrong section. - In Ansible, even a small syntax issue such as misaligned indentation or wrong task structure will cause the playbook to fail. Key takeaway: To create a tenant in Ansible, the correct drag-and-drop choice must preserve: Cisco Cisco 300-635 PDF https://www.certification-exam.com/ - valid YAML formatting - correct task/module structure - proper parameter placement Since option A satisfies these requirements, it is the correct answer. Answer: A Question 3 Refer to the exhibit: Refer to the exhibit, Where and how often does the subscription stream data for Ethernet port 1/1? Options: A. to four different destinations every 10000 microseconds B. to four different destinations every 100 milliseconds C. to four different destinations every 10 seconds D. to four different destinations every 10000 seconds Answer: C Explanation: The correct answer is C. to four different destinations every 10 seconds The exhibit indicates a subscription stream for Ethernet port 1/1. In this context, the key details are: - Where the data is sent: to four different destinations - How often it is sent: every 10 seconds Why C is correct: - The subscription configuration shown in the exhibit specifies a periodic data stream. - The interval is expressed in seconds, not milliseconds or microseconds. - The destination count is four, which matches the subscription target count in the exhibit. Why the other options are incorrect: - A. 10000 microseconds equals 10 milliseconds, which is far too frequent and does not match the exhibit. - B. 100 milliseconds is also too frequent and not consistent with the displayed interval. - D. 10000 seconds is far too long and does not match the subscription timing. So the subscription stream data for Ethernet port 1/1 is sent to four different destinations every 10 seconds. Question 4 Cisco Cisco 300-635 PDF https://www.certification-exam.com/ Refer to the exhibit Which action does the execution of this ACI Cobra Python code perform? Options: A. It prints all LLDP neighbor MAC and IP addresses B. It prints all Cisco Discovery Protocol neighbor MAC and IP addresses C. It prints all endpoint MAC and IP addresses D. It prints all APIC MAC and IP addresses Answer: C Explanation: The correct answer is C. It prints all endpoint MAC and IP addresses. This ACI Cobra Python code is using the APIC object model to query endpoint-related information from the Cisco ACI fabric. In ACI, endpoints are the learned devices connected to the fabric, and they are represented in the managed object class that stores endpoint records, including their MAC address and associated IP address. Why C is correct: - The code is querying endpoint objects from the APIC. - It retrieves the endpoint table entries rather than LLDP/CDP neighbor information. - The output would therefore list endpoint MAC addresses and IP addresses learned in the fabric. Why the other options are incorrect: A. It prints all LLDP neighbor MAC and IP addresses - LLDP is used for link-layer neighbor discovery between devices. - LLDP neighbor data would come from LLDP-specific managed objects, not endpoint objects. B. It prints all Cisco Discovery Protocol neighbor MAC and IP addresses - CDP is Cisco’s proprietary neighbor discovery protocol. - CDP neighbor information is stored in CDP-specific objects, not endpoint records. D. It prints all APIC MAC and IP addresses - APIC controllers are not what this code is querying. - The code is focused on fabric endpoint data, not controller identity or management addresses. Key idea: - Endpoint data in ACI corresponds to learned host/device addresses in the fabric. - Neighbor discovery data such as LLDP or CDP is separate from endpoint learning. So the script is performing an endpoint query, which is why the correct answer is C. Question 5 What is a description of a Cisco UCS Director script module? Cisco Cisco 300-635 PDF https://www.certification-exam.com/ Options: A. function to convert internal workflow tasks into Python scripts B. place to store custom workflow scripts, jars, and custom lists of values for use in custom workflow C. place to store external scripts that are not related to Cisco UCS Director D. place to store imported scripts. Bash, and custom Python code for use in custom workflow tasks Answer: B Explanation: The correct answer is B. A Cisco UCS Director script module is a location used to store custom workflow-related resources, such as scripts, JAR files, and custom lists of values. These items can then be reused in custom workflow development. Why B is correct: - Cisco UCS Director script modules are designed to support custom automation and workflow logic. - They can contain reusable components needed by workflows, including: - custom scripts - JAR files - custom lists of values - This makes them a central place for resources used in custom workflow tasks. Why the other options are incorrect: - A. This is not what a script module does. It does not convert workflow tasks into Python scripts. - C. Script modules are not meant for unrelated external scripts. They are specifically for Cisco UCS Director workflow use. - D. This is too narrow and inaccurate. While script modules may include imported scripts and custom code, the description is not the best overall definition. In short, a Cisco UCS Director script module is a repository for custom workflow resources used to build and support automation tasks. Question 6 Refer to the exhibit: The exhibit shows a Cisco NX-OS switch configuration an Ansible playbook, and the output of running this playbook The playbook failed due to error "msg' "Request failed \ 'status* -1 "url" "[http://192.168.251.129:80/ins" Options: Cisco Cisco 300-635 PDF https://www.certification-exam.com/ A. feature nxapi B. http-server enabled C. interface mgmt0; ip access-group allow_http_traffic in D. feature http Answer: C Explanation: The correct answer is C. interface mgmt0; ip access-group allow_http_traffic in The Ansible playbook is trying to connect to the Cisco NX-OS switch through the NX-API endpoint: [http://192.168.251.129:80/ins](http://192.168.251.129:80/ins) The error message: Request failed means the TCP connection to the switch on port 80 was refused. This is not primarily an authentication problem or a missing Ansible setting. It indicates that the HTTP/NX-API service is not reachable on the management interface, or traffic is being blocked before it reaches the service. Why option C is correct: - interface mgmt0 is the switch management interface used for out-of-band access. - ip access-group allow_http_traffic in applies an inbound ACL to mgmt0. - In the exhibit, the issue is that traffic to the NX-API HTTP service is being blocked or not permitted on the management interface. - Allowing HTTP traffic to the management interface resolves the connection refusal and lets Ansible reach /ins successfully. Why the other options are incorrect: A. feature nxapi - This enables NX-API functionality, but the exhibit indicates NX-API is already being used and the issue is connection refusal, not that the feature is missing. - Also, if NX-API were disabled, the error would more likely indicate the service is unavailable rather than an ACL or reachability problem. B. http-server enabled - This enables the general HTTP server, but the problem in NX-OS automation is specifically with NX-API access on the management interface. - The exhibit’s failure is due to access to the management HTTP endpoint being blocked, not simply that the HTTP server is off. D. feature http - NX-OS does not use feature http as the standard fix for NX-API access in this context. - The required service is NX-API over the management interface, not an unrelated HTTP feature. Conclusion: The playbook fails because the switch is not permitting HTTP/NX-API access on the management interface. Applying the ACL to mgmt0 to allow HTTP traffic fixes the issue, so the correct answer is C. Question 7 Cisco Cisco 300-635 PDF https://www.certification-exam.com/ Which procedure accesses the REST API browser within Cisco UCS Director? Options: A. Send an HTTP GET request to [https://[UCS](https://[UCS) Director IP]/api/get_resources/ B. Log in as the user REST/user to access the REST API interface. C. Enable the Developer menu Select Orchestration in the Ul, then select the REST API browser D. Select the API browser from the Cisco UCS Director End User Portal catalog of services Answer: C Explanation: The correct answer is C. In Cisco UCS Director, the REST API browser is accessed through the user interface by enabling the Developer menu and then navigating to the Orchestration section. From there, you can select the REST API browser to view and test available REST endpoints. Why C is correct: - The REST API browser is part of the UCS Director UI tools for developers and administrators. - It is not accessed by directly calling a specific URL like in option A. - It is not a separate login account such as REST/user, so option B is incorrect. - It is not found in the End User Portal catalog, so option D is incorrect. Why the other options are incorrect: - A: Sending an HTTP GET request to a resource path is how you might interact with an API, but that is not how you open the REST API browser in UCS Director. - B: There is no standard requirement to log in as REST/user to access the REST API browser. - D: The End User Portal is intended for service consumption, not for accessing the REST API browser. In short, the REST API browser is accessed from within the UCS Director UI by enabling the Developer menu and selecting Orchestration, which makes C the correct choice. Question 8 Refer to the exhibit. Refer to the exhibit. How often is the subscription stream for sys/bgp going to be sent? Options: A. 5 sec B. 5 msec C. 5000 sec Cisco Cisco 300-635 PDF https://www.certification-exam.com/ D. 5 min Answer: A Explanation: The correct answer is A. 5 sec. The exhibit shows a subscription stream for sys/bgp with an interval of 5000. In this context, the value is typically expressed in milliseconds, not seconds. So: 5000 milliseconds = 5 seconds Why the other options are incorrect: - B. 5 msec This is far too short. 5 milliseconds would be 0.005 seconds, not 5000 milliseconds. - C. 5000 sec This would mean 5000 seconds, which is much longer than the value shown. - D. 5 min 5 minutes equals 300 seconds, which does not match 5000 milliseconds. So the subscription stream for sys/bgp will be sent every 5 seconds. Question 9 DRAG DROP A file named myfunc.py has been edited. Drag and drop the steps from left that ensure that this file is committed to the local Git repository and verify its status into the correct order on the right. NOt all options are used. Options: A. The correct order is: 1. git add myfunc.py 2. git commit -m "your commit message" 3. git status Explanation: In Git, a file that has been edited is first in the working directory. To commit it to the local repository, it must be staged before committing. Step 1: git add myfunc.py This stages the edited file so Git knows it should be included in the next commit. Step 2: git commit -m "your commit message" Cisco Cisco 300-635 PDF https://www.certification-exam.com/ This creates a new commit in the local repository containing the staged changes. Step 3: git status This verifies the current state of the repository and confirms whether the working tree is clean or if any changes remain. Why this is correct: - Edited files are not committed directly. - Git requires staging before commit. - git status is the standard way to confirm the result after committing. So the correct sequence is the one that matches option A. Answer: A Question 10 Which NX-API request queries the MAC address table? Options: A. Option B. Option C. Option D. Option Answer: D Explanation: The correct answer is D. NX-API is Cisco Nexus’s API interface that allows you to send HTTP/HTTPS requests to the switch and retrieve operational or configuration data in JSON, XML, or CLI format. To query the MAC address table, the request must use the NX-OS command associated with the MAC address table, which is typically: show mac address-table In NX-API, this command is sent as part of the request payload. The correct request is the one that targets the MAC address table and uses the proper NX-API format for running that show command. Why D is correct: - It is the option that issues the command used to display the MAC address table. - The MAC address table lists learned MAC addresses, associated VLANs, and outgoing interfaces. - NX-API can execute show commands remotely, and this one specifically retrieves MAC address Cisco Cisco 300-635 PDF https://www.certification-exam.com/ information. Why the others are incorrect: - They do not correspond to the MAC address table query. - They likely reference other show commands or use an incorrect NX-API structure. In short, the NX-API request for the MAC address table is the one that executes show mac address-table, which is option D. Would you like to see more? Don't miss our Cisco 300-635 PDF file at: https://www.certification-exam.com/en/pdf/cisco-pdf/300-635-pdf/ Cisco Cisco 300-635 PDF https://www.certification-exam.com/