Pass API API-1184 Exam | Latest API-1184 Dumps & Practice Exams - Cert007 1 / 4 Exam : API-1184 Title : https://www.cert007.com/exam/api-1184/ Pipeline Facility Construction Inspector Exam Pass API API-1184 Exam | Latest API-1184 Dumps & Practice Exams - Cert007 2 / 4 1.Who is considered the operator in pipeline construction? A. The individual responsible for quality control B. The regulatory agency overseeing construction C. The entity that operates a pipeline D. The contractor performing the construction Answer: C 2.What is the scope of API Recommended Practice 1184? A. Offshore pipeline facility construction B. Onshore transmission pipeline facility construction C. In-line inspection of pipelines D. Anomaly evaluation Answer: B 3.What is a permit-required confined space in pipeline construction? A. Any space that requires a construction permit B. A space that requires a special permit for access C. A confined space that has restricted means of entry or exit D. A space with limited means of entry or exit and specific hazards Answer: D 4.What is the scope of API Recommended Practice 1184? A. Offshore pipeline facility coaznstruction B. Onshore transmission pipeline facility construction C. In-line inspection of pipelines D. Anomaly evaluation Answer: B 5.Who is responsible for monitoring and inspection requirements during pipeline facility construction? A. Operator B. Contractor C. Regulatory agency D. Engineer Answer: A 6.What does AQP stand for in the context of pipeline facility construction? A. American Quality Plan B. Activity Quantity Plan C. Activity Quality Plan D. Authorized Quality Procedure Answer: C 7.What is the purpose of an activity quality plan (AQP)? A. To identify potential hazards Pass API API-1184 Exam | Latest API-1184 Dumps & Practice Exams - Cert007 3 / 4 B. To establish construction schedules C. To outline project budgets D. To identify quality concerns and control methods Answer: D 8.What is the function of chainage station numbers in pipeline construction? A. Measure pipeline pressure B. Measure pipeline flow rate C. Measure distance along the pipeline centerline D. Measure pipeline diameter Answer: C 9.What is the definition of confined space in the context of pipeline construction? A. Any workspace within a pipeline B. A space designed for continuous occupancy C. A tank with unrestricted entry and exit points D. A space with limited entry and exit points Answer: D 10.Who is considered a contractor in pipeline facility construction? A. Pipeline operator B. Regulatory agency C. Inspection service company D. Equipment supplier Answer: C 11.What is the purpose of corrective action in pipeline construction? A. To prevent the discovery of nonconformances B. To eliminate the cause of a nonconformance and prevent recurrence C. To increase the production speed D. To change the design of the pipeline facility Answer: B 12.What is a ditch plug used for in pipeline construction? A. To prevent erosion around the pipeline B. To facilitate access into a pipeline C. To block the flow of water in a pipeline trench D. To provide structural support to the pipeline Answer: C 13.What is the purpose of an exclusion zone in pipeline construction? A. To demarcate the construction site B. To establish a safe work area C. To mark the location of a pipeline anomaly Pass API API-1184 Exam | Latest API-1184 Dumps & Practice Exams - Cert007 4 / 4 D. To identify the route of the pipeline Answer: B 14.What is included within the confines of a pipeline facility, as defined by the document? A. Areas within a certain radius of the facility B. Only the compressor station of the facility C. Systems, equipment, and pipe located within the facility D. Only the storage tanks of the facility Answer: C 15.What are heritage sites in the context of pipeline facility construction? A. Locations of historical pipeline leaks B. Locations of significant equipment failures C. Locations of historic or cultural significance D. Locations of future pipeline expansions Answer: C 16.What is a holiday in the context of pipeline construction? A. A day when construction work is prohibited B. A discontinuity in a protective coating C. A type of pipeline anomaly D. A term used for pipeline corrosion Answer: B 17.What does ITP stand for in the context of pipeline construction? A. Inspection and Test Plan B. In-Transit Pipeline C. Inspector Training Program D. Inspection and Test Procedure Answer: A 18.Who is considered an inspector in pipeline facility construction? A. Anyone involved in construction activities B. A representative of the regulatory agency C. An individual responsible for environmental monitoring D. An individual qualified to monitor construction activities Answer: D 19.What is the purpose of a material test report (MTR) in pipeline construction? A. To document construction progress B. To provide weather forecasts for construction activities C. To indicate compliance with standards for metal products D. To assess the quality of welds in the pipeline Answer: C