DELL EMC DES-6322 Specialist - Implementation Engineer- VxRail Exam 1. A VxRail Manager VM must be configured as follows: * IP address: 192 168.10.16 * Net mask: 255.255.255.0 * Gateway: 192 168 10 254 Which command must be used? A. vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254 B. vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254 C. vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 - vxrail-gateway 192.168,10 254 D. vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 -- vxrail-gateway 192.168.10.254 ] 22 Answer: C 0 [2 ps um D 2. Which command is used to restart the Loudmouth process on an ESXi node? m xa A. /usr/IibAmiware/loudmouth/bin/loudmouthd restart E 2 B. systemcti restart loudmouth 32 -6 C. /etc/int.d/loudmouth restart S E D D. systemcti restart vmware-loudmouth C M Answer: C E LL E D h it W 3. A VxRail Test Plan has been completed m xa What is the protocol for recording the results'? E 2 A. With the implementation team, complete and document each test, test date, and a 32 -6 screenshot of results S E B. In front of a customer, complete each test and document the test date D s as C. With the implementation team, complete each test and document the test date P ly D. In front of a customer, complete and document each test, test date, and a nt ie screenshot of results ic ff Answer: A E 4. An implementation engineer is configuring External SRS. Where can they find the installation files for SRS VE? A. VxRail Support Matrix B. VxRail Manager C. SolVe Online D. Dell Support Page Answer: D 5. What data protection option is included with VxRail? A. vSphere Replication NetWorker B. PowerProtect Software Data Domain Cloud Tier C. RecoverPoint for VM vSphere Replication D. RecoverPoint for VM Avamar Answer: C 6. An implementation engineer is tasked with setting up RecoverPoint for VMs on a new 4-node E Series VxRail duster How many VMs are licensed to be protected on the cluster? A. 5 ] 22 B. 10 0 [2 C. 20 ps um D. 25 D Answer: C m xa E 2 32 -6 7.1.What is validated by running the Proactive VM Creation test in vCenter on a S E D VxRail cluster? C M A. vSAN operates successfully E LL B. Network firewalls are configured correctly E D C. vSAN has sufficient storage capacity h it W D. Network performance is sufficient m xa Answer: A E 2 32 -6 S E 8. What is the maximum number of supported nodes for a VxRail cluster running on a D s as 1 GbE network? P ly A. 4 nt ie B. 5 ic ff C. 16 E D. 32 Answer: B 9. During the activation of Internal SRS, the implementation engineer receives a message that the deployment has failed What is a possible cause? A. SRS VE Gateway on the same subnet as the VxRail Manager B. VxRail status already set to installed' in IB database C. Site ID mismatch between the IB database and the SRS Wizard D. Witness Gateway not configured following Dell best practices Answer: C 10. What is a consideration when adding nodes to a VxRail G Series chassis? A. G560 and G410 nodes are permitted in the same chassis B. In a full G Series chassis, all nodes must have 10GbE ports C. Hybrid and All-Flash nodes are permitted, if in different chassis D. All nodes in a G Series chassis must be identical Answer: D 11. What is validated by running the Proactive Network Performance test in vCenter ] 22 on a VxRail cluster? 0 [2 A. Latency and bandwidth measurement to the witness host ps um B. Network configuration and performance for vSAN D C. Network performance for virtual machines m xa D. Latency measurement between DCs for Stretched Clusters E 2 Answer: B 32 -6 S E D C M 12. A company needs to enable vSphere GPU capabilities on their VxRail cluster. To E LL do so, they need to purchase a specific entitlement. E D What licensing satisfies this requirement? h it W A. vSphere Enterprise Plus m xa B. vSAN Enterprise Plus Edition E 2 C. vSAN Advanced Edition 32 -6 D. vSphere Standard S E Answer: A D s as P ly nt ie 13. What is a valid 2-node VxRail cluster configuration? ic ff A. 2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenter E B. 2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenter C . 2x 1 GbE and 2x 10 GbE in a switch configuration and internal vCenter D. 2x 10 GbE and 2x 25 GbE in a direct-connect configuration and internal vCenter Answer: B 14. A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible? A. Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding) B. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding) C. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring) D. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy Answer: B Test DES-6322
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-