User Manual 1.Unbox and take out the fixture, then take off the driver from the fixture. Connector board 2.Unfold the light flat. 3.Fix the two sides of the fixture with connectors. Round screw Power supply Hang bar Sling Cable Connector 4.Put the driver on the fixture and fix it in the reserved holes with 6.After installation, use a sling to hang up the light on the Hang bar, as screws, connect the cable connector and locked. shown in the picture above. RJ14 port Controller 7. Insert the signal cable into the RJ14 port on fixture. 8.Insert the other side signal cable into the controller. SAFETY PRECAUTIONS: 1.Please read this manual thoroughly before attempting to install or operate the fixture; If you are not comfortable with the installation AC input of high-performance lighting systems, you should seek the services of a qualified installation professional or call us for help . 2.To prevent electrical shock, ensure to turn off the power before installing, maintaining or repair the fixture. 3.The fixtures are rated suitable for damp locations . A “damp Controller location” is defined as an interior or exterior location in which water or other liquids may drip, splash on or against the electrical components of a lighting fixture. 8.The last installation, as shown in the picture on the right, connect 4.Retain this manual in a safe place for future maintenance reference. the cable cord to power, and adjust the controller to the appropriate Safety is a key component to a long lasting and trouble-free brightness. installation.
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-