PC3 – LEPC FRONT – APC BACK – CBN3 – FRONT FLAP ● PC3 setup comprised of LEPC front panel, APC back panel, CBN3 Cummerbund and removable Front Flap ● Removable Front Flap and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert ● Color matching Velcro® Brand Loop Admin Panel ● Back panel includes six rows of MOLLE webbing ● CBN3 - Three internal elastic mag pouches, soft armor pocket, and 6”x6” plate pocket with internal adjustment ● 100% made in the USA $294.00 The PC3 setup is comprised of the front panel of the Law Enforcement Plate Carrier (LEPC), the back panel of the Assault Plate Carrier (APC), the Standard Molle, Plate Pocket Cummerbund (CBN3) and a removable Front Flap. The PC3 is made of 500 Denier Cordura with a mesh interior and comes with our standard shoulder pads that are made of a stretch woven material allowing enough elasticity to permit room for cable/hydration tube routing. The front and rear hard armor plate pockets have adjustable internal plate suspension straps and a Velcro® Brand flap closer to secure the plates. The PC3 is available in two sizes; S/M and L/XL. The plate pockets are sized to accommodate Stand-Alone or ICW SAPI or Swimmer cut plates. The S/M fits size small, medium and 10"x12" sized plates. The L/XL fits large and x-large plates. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA. The Law Enforcement Plate Carrier (LEPC) front panel has an integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert. The chest has a color matching Velcro® Brand Loop Admin Panel and Velocity Systems SwiftClip® Attachment System for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs & SwiftClip® Placards). This setup also comes with our removable Front Flap, which provides 3 additional rows of MOLLE Webbing. The Assault Plate Carrier (APC) back panel features 6 rows of MOLLE webbing providing ample surface area for mounting mission essential pouches. This setup includes the Standard Molle, Plate Pocket Cummerbund (CBN3) which provides three rows of MOLLE webbing on the outer side, three internal elastic mag pouches, a soft armor pocket with Velcro® Brand closure, and a 6"x6" plate pocket with internal VELCRO® Brand adjustment to position a ballistic plate forward or backward. The size small has 5 complete columns of MOLLE, size medium has 6 complete columns of MOLLE, size large has 7 complete columns of MOLLE. *The follow is not included in this setup: Law Enforcement Plate Carrier (LEPC) Back Panel / Assault Plate Carrier (APC) Front Panel / Low-Profile Elastic Cummerbund (CBN1) / Quarter Flaps. *The Low-Profile Elastic Cummerbund (CBN1) and Quarter Flaps can be purchased from our website as additional accessories.
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-