ABOUT US We specialize in the manufacture, production and trade of modern building materials on the latest international methods using our scientific expertise through the assistance of specialized physicists and chemists to obtain the best desired results with the best quality and the cheapest prices. We also have different sections in various building materials and this catalog is specialized in part of the Adhesives and Insulators section 3 ALAMANA ALAMANA TILE ADHESIVE & GROUT PLATINUM FIX POOL C2FTES2 PLATINUM FIX HIGH TECH 2K C2FTES2 PLATINUM FIX PROFISSIONAL C2TES1 PLATINUM LITE C1TE PLATINUM FIX 124 PLATINUM GROUT 3000 PLATINUM GROUT 3900 PLATINUM ELASTICOOL 51 PLATINUM ELASTIKOR 31 ALAMANA PAINT 4 ALAMANA ALAMANA WATERPROOFING ADHESIVE - Latest technology of Cementous waterproofing Tile adhesive for swimming pools and wet area - sand and mud free - Use for high quality and , big size ceramic and porcelain tiles , natural stone and glass mosaic PROPERTIES - Waterproof made for solving problems in swimming pools - Use to fix Big size and heavy tiles and natural stone - Indoor and outdoor tile adhesive. - Long shelf life. - Perfect adherence. - Easy to use. - High deformation HOW TO USE THE PRODUCT? (APPLICATION) - Bring empty Bucket and fill with 5-6ltr of cold clean water. - Insert the 22 kg bag and mix using mechanical mixer for 4-5 minutes to get homogenies mixture - Let the mix rest for 5-10 min then mix it again. - Clean both surface and rinse with water. - The perfect way of using the adhesive Apply suitable amount of adhesive using jagged trowel making straight lines on both sides wall and tile - Stick the tile that covered with adhesive on the other layer of adhesive and move it slightly left to right to remove air under of it and adjust the tile can use plastic hummer or any other tool - Apply grout after 24 hours on floor and 12 hours walls WARNINGS - Don’t use hot water for mixing hot water has negative effect on chemical in adhesive. - Clean the tools using water after finishing. - Use safety equipment always be safe - Don’t stack more than 10 bags on top of each other for long time - If stored for long time check the properties. PACKING AND STORAGE - 20 kg paper bag - White powder - Store in dry place away from direct sun light - Valid for 2 years in original bags TECHNICAL INFORMATION - Appearance: white / Gray Powder - Shelf life: 24 month / 2 years - Mixing ratio : 5-6 ltr/ 20 kg - Pot life : 2-3 hours in 21C - Consumption: 3-5 kg/m² - Reaction to fire: A1 - Applying temperature: 30C-45C PLATINUM FIX POOL C2FTES2 5 ALAMANA ALAMANA WATERPROOFING ADHESIVE - Latest technology of Cementious waterproofing Tile adhesive for swimming pools and wet area - sand and mud free - Use for high quality and , big size ceramic and porcelain tiles , natural stone and glass mosaic PROPERTIES - Waterproof made for solving problems in swimming pools - Use to fix Big size and heavy tiles and natural stone - Indoor and outdoor tile adhesive. - Long shelf life. - Perfect adherence. - Easy to use. - High deformation HOW TO USE THE PRODUCT? (APPLICATION) - Bring empty Bucket and pure the white liquid in it - pure the 20 kg bag and mix using mechanical mixer for 4-5 minutes to get homogenies mixture - Let the mix rest for 5-10 min then mix it again. - Clean both surface and rinse with water. - The perfect way of using the adhesive Apply suitable amount of adhesive using jagged trowel making straight lines on both sides wall and tile - Stick the tile that covered with adhesive on the other layer of adhesive and move it slightly left to right to remove air under of it and adjust the tile can use plastic hummer or any other tool - Apply grout after 24 hours on floor and 12 hours walls WARNINGS - Don’t use hot water for mixing hot water has negative effect on chemical in adhesive. - Clean the tools using water after finishing. - Use safety equipment always be safe - Don’t stack more than 10 bags on top of each other for long time - If stored for long time check the properties. PACKING AND STORAGE - 20 kg paper bag - 5 liter white liquid - White powder - Store in dry place away from direct sun light - Valid for 2 years in original bags TECHNICAL INFORMATION - Appearance: white / gry powder White liquied - Shelf life: 24 month / 2 years - Mixing ratio : 5ltr liquid / 20 kg powder - Pot life : 2-3 hours in 21C - Consumption: 3-5 kg/m² - Reaction to fire: A1 - Applying temperature: 30C-45C PLATINUM FIX HIGH TECH 2K C2FTES2 6 ALAMANA ALAMANA DEFINITION - Cementous tile adhesive grade (C2FTES1) suitable for interior and exterior application. Field of application - Exterior and interior for all type of ceramic and granite stone. - Floors and walls - Swimming pools - Bathroom and kitchens - Fixing tile on old tiles - Workability at high temperature weather - Bonding on cement board and gypsum walls APPLICATION - Mix platinum 20 kg with 5 to 6 liter of water for 4 minutes and let the mixture rest for 5 minutes then mix it again for 1 minuet - After cleaning the both end of tile and surface you want to use the adhesive on it and rinse with water start to apply the adhesive on both sides in straight lines(make sure no oils , grease ,lose parts ,dust) - Press the tiles against wall or floor the little movement to both sides to be sure you remove the air out and start to adjust the tile - You have only 10 to 20 minutes to re adjust the tile if you remove it you need to use new layer of adhesive don’t rely on old adhesive. - Use the trowel suitable for the tile and move it in straight lines and line it with line on the other surface - For using the platinum fix to install tiles on old tiles make sure of the old tile is clean and no any layers on top of it . WARNINGS - This product contain cement will irritating the eyes please use clean water to clean the eyes and get medical help if needed - The consumption of this product depend on the thickness of the layer and the type of tiles TECHNICAL INFORMATION Material : White or grey powder . Water mixing ratio : 5- 6 ltr Pot life : 5 hours Consumption : 3-5 kg/ m Tensile adhesion strength >1N/mm PLATINUM FIX PROFISSIONAL C2TES1 7 ALAMANA ALAMANA Cementous Tile adhesive sand and mud free high quality for ceramic and porcelain tiles floor and walls use the longest store life product ever PROPERTIES - Indoor and outdoor tile adhesive. - Long shelf life. - Perfect adherence. - Easy to use. HOW TO USE THE PRODUCT? (APPLICATION) - Bring empty Bucket and fill with 5-6ltr of cold clean water. - pure the 20 kg bag and mix using mechanical mixer for 4-5 minutes to get homogenies mixture - Let the mix rest for 5-10 min then mix it again. - Clean both surface and rinse with water. - The perfect way of using the adhesive Apply suitable amount of adhesive using jagged trowel making straight lines on both sides wall and tile - Stick the tile that covered with adhesive on the other layer of adhesive and move it slightly left to right to remove air under of it and adjust the tile can use plastic hummer or any other tool - Apply grout after 24 hours on floor and 12 hours walls WARNINGS - Don’t use hot water for mixing hot water has negative effect on chemical in adhesive. - Clean the tools using water after finishing. - Use safety equipment always be safe -Don’t stack more than 10 bags on top of each other for long time -If stored for long time check the properties. PACKING AND STORAGE -20 kg paper bag - White powder - Store in dry place away from direct sun light - Valid for 2 years in original bags TECHNICAL INFORMATION - Appearance: white / gry powder - Shelf life: 24 month / 2 years - Mixing ratio : 5-6 ltr/ 20 kg - Pot life : 2-3 hours in 21C - Consumption: 3-5 kg/m² - Reaction to fire: A1 - Applying temperature: 30C-45C PLATINUM LITE C1TE 8 ALAMANA ALAMANA PLATINUM GROUT 3000 PLATINUM GROUT 3900 PLATINUM FIX 124 9 ALAMANA ALAMANA DESCRIPTION • Acrylic dispersion based, one component, liquid plastic coating and waterproofing material which is highly elastic, and saves energy by reflecting radial heat energy on surface of roofs. FIELD OF APPLICATION • Waterproofing of the all types of flat or inclined roofs and terraces covered with concrete, plaster, asbestos cement, galvanized steel, zinc, aluminum, PVC, polyester or wood, • Exterior waterproofing of buildings. • Surfaces of stone, clinker, decorative coatings etc, • Old bitumen, bituminous membrane or asphalt covered surfaces, • On spray polyurethane foam, • Waterproofing protecting and energy saving material. PROPERTIES • Ready to use, easily applicable with brush and roller by airless spray method. • Low labor cost. • 400% elastic. • Water vapor permeable. • Highly resistant to UV rays. • High UV(radial heat) reflectivity. • Reduces the temperature within the building and protects the building from excess heat by decreasing the surface temperature. • Saves energy by reducing the need of electric energy used for cooling. • Strong adhesion to difficult surfaces. • Remains flexible at low temperatures. • Hard to get dirty. • Resistant to extreme weather conditions and aging. • Resistant to stagnant water. PLATINUM ELASTICOOL 51 10 ALAMANA ALAMANA DESCRIPTION • Acrylic emulsion based, one component, brush or roller applicable, elastic waterproofing material. FIELD OF APPLICATION • Waterproofing of the all types of flat or inclined roofs like concrete, plaster, asbestos cement, aluminum, zinc, PVC, asphalt (at least one year old), • Waterproofing of north side of buildings, • For crack bridging, PROPERTIES • Ready to use, easily applicable with brush and roller. • Low labor Cost. • Water vapor permeable. • Highly resistant to UV rays. • Elastic at low temperatures. • Tintable in 144 colors of Renk Ustası. • Over paintable. PLATINUM ELASTIKOR 31 11 ALAMANA ALAMANA DESCRIPTION Ready to use high performance emulsion polymer based tile adhesive with extended open time and reduced slip for ceramic tiles and stones. FIELD OF APPLICATION - Easy and clean application for interior wall and floor bonding of all types of ceramic tiles even on deformable surfaces - Bonding of tiles on gypsum panels and painted walls - Interior bonding of insulating and decorative ceiling materials PROPERTIES - Ready to use - Easily trowellable - Perfect adherence - Highly deformable , resistant to normal vibration to which building materials are subject - Extended open time, Allows installation of tiles from top towards the bottom Storge Shelf life 12 months PLATINUM 230 ALAMANA FLOOR PU PROTECTOR is a polyurethaneresin based, two-component, low- viscosity, and transparent coating material with high UV resistance. AREAS OF APPLICATION On epoxy or polyurethane floor coatings, On PVC, ceramic and marble floor coverings, On coverings such as decorative exterior stone cladding etc, On floor and vertical coverings of hygienic environments ALAMANA FLOOR PU PROTECTOR such as hospitals, laboratories and food-related establishments, It is used as easy-to-clean, chemical- and abrasionresistant protective top coat varnish. ADVANTAGES Low-viscosity, Flexible, High adhesion ability, High UV resistance, Good chemical resistance, High wearing resistance. 12 ALAMANA ALAMANA DEFINITION High performance, low thermal transmittance, micro ceramic-glass technology modified acrylic dispersion based, elastic, liquid, and water based lining. Provides thermal insulation for walls roofs inside and outside ADVANTAGES AND PRODUCT FEATURES • Has low heat conductivity • Provides up to 50% heat saving • Protects structure’s heat balance • Non•11amimable • 100% waterproof • Elastic. No cracking or disjuncture • Prevents moisture, damp, and mold • Easy to apply • Water-based • Breather. Doesn’t make condensation APPLICATION WHERE TO USE Suitable for houses, living quarters, public buildings, production plants, storages, warehouses. hangars, cold storages, geothermal facilities and fields, power transmission lines, power distribution units, silos and many more domestic and Industrial exteriors. CONSUMPTION ALAMANA PAINT Depending on the surface of application 30 m2 two coats STORAGE AND SHELFLIFE 12 months in cool and dry place, with the occasional change of location. Before using the paint, read the instructions. Package must be mixed with a low-speed mixer. If the package is open, do not use it and contact with the supplier. If the break between the paintings Is long, mix the package again before using. It is very important and delicate issue for spreading of the ceramics on the surface. Application area must be cleaned from oil, dirt and double skins. RP-PRIMER must be applied as primer lining, and put to dry for 24 hours. Do not add water or solvent to the product. Apply 2 coals. Wait approximately 24 hours between the coats. Ideal application temperature is between 5°C to 40’C. Avoid contact with eyes and skin. Hands and tools can be cleaned with water. Cannot be used with dry material. 13 ALAMANA ALAMANA WATERPROOFING PRODUCTS PLATINUM SEALATEX 3023 PLATINUM SEALATEX 3024 PLATINUM SEALATEX 3031 PLATINUM SEALATEX 3032 ALAMANA WATERPROOF ALAMANA PLATINUM HX 112 14 ALAMANA ALAMANA Positive waterproofing system for high pressure areas WHERE TO USE? You can use platinum sealatex every mineral surface to add waterproofing layer - Indoors - Outdoor - Bathroom and kitchens - Under tile - Swimming pools - Facades - Floors and walls - Retaining walls - Marin facades - Lakes and pools - Water tanks HOW TO USE IT? It’s so easy to use our waterproofing systems after reading this lines you will be professional in using our system - Clean the surface from lose parts and Dupree very well this can be weak layer between waterproofing system and the good surface we need to apply on it (sometimes the concrete has shiny area that needs to be sanded ). - Clean the area also from oils and grease - Rinse the area with clean water - Close and fix all the cracks and gabs better to be three days before the application - Moist the surface - Mix the product mechanically by adding the liquid in clean pucket slowly add the powder while mixing till you add all the powder to liquid now you are ready to apply the waterproofing system - Now use the brush short hair (short hair brush can move the leftover dust so the waterproofing system get into good surface) apply good amount of water proofing while you are move the brush in one direction forward and backward. - Be sure to apply thin layer every time so don’t get cracked surface - After drying the first layer start mixing new patch and apply second coat vertically on first layer. - Add the third coat vertically on second coat. - After 48 hours to 72 hours you are ready to test the waterproofing system with water. - Fill the area with water and check the water level if it decrease faster that evaporation rate you have to check the water proofing surface for any cracks and missing area (notes . check the area between vertical and horizontal areas in 90 degree angles We advise to use the tape for that areas ) - After passing the test congratulations you can apply the finishing layer as you want. PLATINUM SEALATEX 24 15 ALAMANA ALAMANA Positive waterproofing system WHERE TO USE? You can use platinum sealatex every mineral surface to add waterproofing layer - Indoors - Outdoor - Bathroom and kitchens - Under tile - Facades - Floors and walls - Retaining walls - Marin facades HOW TO USE IT? It’s so easy to use our waterproofing systems after reading this lines you will be professional in using our system - Clean the surface from lose parts and Dupree very well this can be weak layer between waterproofing system and the good surface we need to apply on it (sometimes the concrete has shiny area that needs to be sanded ). - Clean the area also from oils and grease - Rinse the area with clean water - Close and fix all the cracks and gabs better to be three days before the application - Moist the surface - Mix the product mechanically by adding the liquid in clean pucket slowly add the powder while mixing till you add all the powder to liquid now you are ready to apply the waterproofing system - Now use the brush short hair (short hair brush can move the leftover dust so the waterproofing system get into good surface) apply good amount of water proofing while you are move the brush in one direction forward and backward . - Be sure to apply thin layer every time so don’t get cracked surface - After drying the first layer start mixing new patch and apply second coat vertically on first layer. - Add the third coat vertically on second coat. - After 48 hours to 72 hours you are ready to test the waterproofing system with water. - Fill the area with water and check the water level if it decrease faster that evaporation rate you have to check the water proofing surface for any cracks and missing area (notes . check the area between vertical and horizontal areas in 90 degree angles We advise to use the tape for that areas) - After passing the test congratulations you can apply the finishing layer as you want. PLATINUM SEALATEX 23 16 ALAMANA ALAMANA Positive and negative crystalized waterproofing system WHERE TO USE? You can use platinum sealatex every mineral surface to add waterproofing layer - Indoors - Outdoor - Bathroom and kitchens - Under tile - Swimming pools - Facades - Floors and walls - Retaining walls - Marin facades - Lakes and pools - Water tanks HOW TO USE IT? It’s so easy to use our waterproofing systems after reading this lines you will be professional in using our system - Clean the surface from lose parts and Dupree very well this can be weak layer between waterproofing system and the good surface we need to apply on it (sometimes the concrete has shiny area that needs to be sanded ). - Clean the area also from oils and grease - Rinse the area with clean water - Close and fix all the cracks and gabs better to be three days before the application - Moist the surface - Mix the product mechanically by adding the liquid in clean pucket slowly add the powder while mixing till you add all the powder to liquid now you are ready to apply the waterproofing system - Now use the brush short hair (short hair brush can move the leftover dust so the waterproofing system get into good surface) apply good amount of water proofing while you are move the brush in one direction forward and backward . - Be sure to apply thin layer every time so don’t get cracked surface - After drying the first layer start mixing new patch and apply second coat vertically on first layer. - Add the third coat vertically on second coat. - After 48 hours to 72 hours you are ready to test the waterproofing system with water. - Fill the area with water and check the water level if it decrease faster that evaporation rate you have to check the water proofing surface for any cracks and missing area (notes . check the area between vertical and horizontal areas in 90 degree angles We advise to use the tape for that areas) - After passing the test congratulations you can apply the finishing layer as you want. PLATINUM SEALATEX 32 17 ALAMANA ALAMANA Positive and negative crystalized waterproofing system WHERE TO USE? You can use platinum sealatex every mineral surface to add waterproofing layer - Indoors - Outdoor - Bathroom and kitchens - Under tile - Swimming pools - Facades - Floors and walls - Retaining walls - Marin facades - Lakes and pools - Water tanks HOW TO USE IT? It’s so easy to use our waterproofing systems after reading this lines you will be professional in using our system - Clean the surface from lose parts and Dupree very well this can be weak layer between waterproofing system and the good surface we need to apply on it (sometimes the concrete has shiny area that needs to be sanded). - Clean the area also from oils and grease - Rinse the area with clean water - Close and fix all the cracks and gabs better to be three days before the application - Moist the surface - Mix the product mechanically by adding the liquid in clean pucket slowly add the powder while mixing till you add all the powder to liquid now you are ready to apply the waterproofing system - Now use the brush short hair (short hair brush can move the leftover dust so the waterproofing system get into good surface) apply good amount of water proofing while you are move the brush in one direction forward and backward . - Be sure to apply thin layer every time so don’t get cracked surface - After drying the first layer start mixing new patch and apply second coat vertically on first layer. - Add the third coat vertically on second coat. - After 48 hours to 72 hours you are ready to test the waterproofing system with water. - Fill the area with water and check the water level if it decrease faster that evaporation rate you have to check the water proofing surface for any cracks and missing area (notes . check the area between vertical and horizontal areas in 90 degree angles We advise to use the tape for that areas) - After passing the test congratulations you can apply the finishing layer as you want. PLATINUM SEALATEX 31 18 ALAMANA ALAMANA DEFINITION It is a void free closed pore waterproofing mixture that with stands the positive and negative pressure of water PLACES OF USE It is used in all internal and external places such as bathroom, swimming pools and walls. It is used to repair the flowing water channels and is used in the basements of building as an insulator for moisture and water and is used as connections for water pipes made of cement material’s GROUND PREPARATION All holes and cracks must be repaired before use at least 24 hours in advance, and the floor must be cleaned of all extraneous material’s such as oils, paint, dust and the like TERMS OF USE Ambient temperature The temperature should be between +5C to +35C degrees Celsius, do not use in frosty weather or strong winds or the like. HOW TO USE The product consists of white crystal granules and natural chemicals that help isolate stronger, the thickness of the material on the floor should be 2 mmm and other material’s can be used on the product after drying, and the method of use is simple, which is through two stages with the withdrawn money, provided that we leave a period of time not less than two or three hours the material dries up after 24 hours with normal temperatures as for water tanks, the dry period lasts between seven to ten days. PLATINUM SEALATEX M FIX 19 ALAMANA ALAMANA DESCRIPTION Elastic waterproofing paint infused with polymers acrylic based, resistant to adhesion, UV Light, and has a high adhesive to different types of surfaces concrete, metal wood suitable for roofs, walls indoor and outdoor. APPLICATION AREA Different types of surfaces, wood, metal, concrete, used before and after applying tiles and also used outside of buildings APPLICATION Apply the suitable primer depending on the surface, then apply two coats using roll or brush, wait between 4-8 hrs before applying the second coat, then leave the surface to dry for 24hrs before use ALAMANA WATERPROOF 20 ALAMANA ALAMANA PLATINUM HX 112 is a powerful product with the feature of closing the leaks that occur on wet grounds on site It provides permanent solution in the areas where it is used. Application areas of HX 112 It can be used easily in any condition where water meets the concrete surface such as Swimming Pools, Ornamental Pools, Terraces, Concrete surfaces, Balconies, Bathrooms, Toilets. THINGS TO BE CONSIDERED BEFORE APPLICATION 1- Weather conditions are important in terms of application. It should not be used in open areas exposed to the harmful rays of the sun. Evening hours should be preferred for use in these and similar areas. 2- Since freezing occurs in cold weather, it is recommended to be used when the air temperature is 6 -10°C and above. 3- The application area should be cleaned and the floor should be wetted in advance. 4- All water outlets in the application area should be closed. 5- In environments where the ground is oily (Dining hall, etc.), the floor should be deoiled and cleaned before applying. 6- The amount of product to be used must be determined correctly. The amount of product in the application will vary depending on the condition of the joint on the wet floor. 7- 1lt of product should be used for 2 m2 area on concrete surfaces. 8- 1 lt of product should be used for an area of 3 m2 as cracks can form on the floors with old, long-used and worn joints. METHOD OF APPLICATION 1- Half of the amount determined for application is poured on the previously wetted floor. Priority is given to the areas where you suspect a leak, and it is rubbed in the entire floor with the help of a brush. The chemical is activated on the ground with a brush every one hour. In this way, the product will gain more reaction and increase its effect. This is valid for the first 5 hours after the application. 2- After 5 hours, the rest of the product is poured by diluting 1/4. The product is rubbed in the entire surface with a brush. It is left to mature. Since our concentrated product is diluted and thinned in the second application, it will reach the capillary cracks more easily. After the second application, wait for 6 to 12 hours and wash. Outlets that are closed during the application are opened, the floor is washed with plenty of water and the surface is cleaned from all residues.