Drone License Practice Test NCDOT UAS PDF License License NCDOT UAS PDF Questions Available Here at: https://www.easy-quizzz.com/us/dmv-practice-test/faa-part-107-practice-test/ncdot- uas/quiz.html Enrolling now you will get access to 372 questions in a unique set of NCDOT UAS Question 1 What is the standard altitude for flying a drone near an airport in the United States? Options: A. 50 feet B. 400 feet C. 800 feet D. 1200 feet Answer: D Explanation: The FAA recommends a standard altitude of at least 1200 feet for flying drones near an airport to ensure safety and avoid any interference with aircraft operations. Question 2 What is the maximum altitude limit for flying a drone in Class G airspace in the United States? Options: A. 400 feet AGL B. 500 feet AGL C. 600 feet AGL D. 700 feet AGL License License NCDOT UAS PDF https://www.easy-quizzz.com/us/ Answer: A Explanation: In Class G airspace, drones can fly up to a maximum altitude of 400 feet AGL (Above Ground Level) without requiring any special permission from the Federal Aviation Administration (FAA). Question 3 What should a drone operator do in case of an emergency during a flight? Options: A. Land the drone immediately B. Fly the drone higher to avoid obstacles C. Keep flying the drone until the battery dies D. Ignore the emergency and continue the flight Answer: A Explanation: In case of an emergency, the drone operator should land the drone immediately to avoid any further damage or accidents. Question 4 What is the maximum altitude a UAS can fly in the United States without permission from the FAA? Options: A. 200 feet B. 400 feet C. 500 feet D. 1000 feet Answer: B Explanation: According to FAA regulations, UAS can fly up to 400 feet above ground level without permission. Question 5 Which of the following is a commonly used mapping technique in drone navigation? License License NCDOT UAS PDF https://www.easy-quizzz.com/us/ Options: A. LIDAR B. RADAR C. GPS D. Sonar Answer: C Explanation: GPS (Global Positioning System) is a commonly used mapping technique in drone navigation. It allows drones to know their exact location and navigate to specific points. Question 6 What is the term used to describe the force that opposes the motion of an aircraft through the air? Options: A. Thrust B. Lift C. Drag D. Weight Answer: C Explanation: Drag is the aerodynamic force that opposes motion through the air. It results from the friction and pressure differences caused by the movement of the aircraft through the air. Question 7 What is the standard communication protocol for drone operations in the United States? Options: A. IEEE 802.11 B. FAA Part 107 C. GSM D. CDMA License License NCDOT UAS PDF https://www.easy-quizzz.com/us/ Answer: B Explanation: The Federal Aviation Administration (FAA) Part 107 is the standard communication protocol for drone operations in the United States. It outlines the rules and guidelines for operating drones commercially in the US. Question 8 Which of the following is a recommended UAS equipment maintenance practice in the United States? Options: A. Ignoring minor equipment malfunctions B. Regularly inspecting and cleaning your equipment C. Using your equipment without proper training D. Disregarding manufacturer maintenance guidelines Answer: B Explanation: Regular equipment maintenance and inspection are important to ensure that UAS equipment is working correctly, and to identify and address any issues before they cause safety problems. Question 9 Which of the following is NOT a prohibited area for drone flights near airports in the United States? Options: A. Runways B. Taxiways C. Hangars D. Control towers Answer: C Explanation: While flying drones near runways, taxiways, and control towers is strictly prohibited, hangars are not considered as restricted areas. However, it is still important to avoid flying near any buildings or structures within the airport perimeter. License License NCDOT UAS PDF https://www.easy-quizzz.com/us/ Question 10 Which of the following airspace classifications require authorization from the FAA before flying a drone? Options: A. Class A B. Class B C. Class C D. Class G Answer: A, B, C Explanation: Flying a drone in Class A, B, and C airspace requires prior authorization from the FAA due to high levels of manned air traffic. Hence, it is important to obtain proper clearance before operating your drone in these airspaces. Would you like to see more? Don't miss our NCDOT UAS PDF file at: https://www.easy-quizzz.com/us/dmv-practice-test/faa-part-107-practice-test/ncdot- uas-pdf/ License License NCDOT UAS PDF https://www.easy-quizzz.com/us/