Home Demolition redraptorsdemolition.com.au Cost Breakdown in Melbourne Planning to demolish a house in Melbourne? Whether you’re clearing a property for a rebuild, subdivision or renovation, knowing the true cost of demolition is essential. Too many homeowners go in under-budget, only to face surprises mid-way. This guide will walk you through realistic cost ranges for Melbourne, break down each component, highlight hidden fees, and give you tools to budget intelligently. Ensures you don’t blow your project due to unforeseen costs. Helps you align with your overall project (knock down + rebuild). Lets you evaluate quotes more effectively. Enables you to factor in potential savings (salvage, recycling). Reduces stress and delays by planning ahead. Why Prepare a Demolition Budget? Here are realistic cost estimates for residential house demolition in Melbourne: According to several industry sources, costs for a standard house demolition in Melbourne range from ≈ A$10,000 to A$40,000 depending on size, materials and site complexity. Some firms now estimate ranges up to A$20,000 to A$50,000 in 2025 for single-storey to large homes, including complex factors. One national guide suggests for Australia the average three-bedroom house demo ≈ A$17,000, but notes it can rise to A$40,000 or more in complex cases. What this means for you: If your house is a simple single-storey brick veneer in a typical suburb with good access, you might land in the lower part of the range (say A$15k-25k). If it’s large, double-storey, includes asbestos, in a difficult access site – budget more (A$30k-50k+). Typical Cost Ranges in Melbourne Major Cost Components Explained You will need to obtain the correct demolition permit from your local council in Victoria. These fees vary depending on the council, complexity, heritage status or tree/vegetation removal. Typical cost: from A$1,000-A$3,000 (estimate) depending on local rules. Tip: Confirm with your contractor whether the quote includes permit fees or if you pay separately. Permits & Council Fees Before demolition you must disconnect water, gas, electricity, NBN/phone etc. Sometimes the contractor arranges this, or you may need to handle it. Costs vary but can range from a few hundred to a few thousand dollars depending on provider, re-instatement requirements. Utility Disconnections Major Cost Components Explained Many older Melbourne houses (pre-1980s) may contain asbestos or other hazardous materials. Removal must be done by licensed contractors and adds significant cost. For example, one guide lists asbestos removal adds around A$2,000-A$5,000+ in many cases. Disposal fees for contaminated waste are higher. If asbestos is present, this may make up a meaningful portion of your budget. Hazardous Materials (Asbestos etc) This is the core of the cost: labour, plant (excavators, bobcats, trucks), operator hours. Size of house, number of storeys, construction materials (brick / concrete vs timber) all dramatically affect cost. For example: brick and concrete homes cost more to demolish than timber or lightweight homes. Example: A rough rate of A$40-65 per m² is cited for typical demolition work in Australia. For quoting: ask for breakdown: how many days, equipment, inclusions (site clean, skip bins etc). Demolition Contractor & Machinery Major Cost Components Explained Once your house is demolished the material must go somewhere: landfill, recycling, screen and reuse. Transport, tip fees, recycling separation all add cost. Additional cost factors: distance to tip, site access, amount of concrete/brick vs timber. Example: if you have large volume of concrete, bricks, or tree stumps to remove, budget more. Waste Removal & Disposal After demolition, you’ll often need the site cleaned, levelled, debris removed. If you plan to build soon, you may need foundation/pad removal, soil remediation, tree stump removal etc. Additional costs may run from A$1,000-A$5,000+ depending on complexity. Some quotes include this as standard; always check. Site Clean-up & Remediation These are costs you may not think of upfront, but which can add up: Tree/vegetation removal or protection (if mature trees, heritage trees) Fencing and hoarding for safety and neighbouring property protection Temporary site access (e.g., crane or large machinery if access narrow) Retaining walls or slope correction if the block is sloped Salvage & material recovery (if you want to keep timber, bricks etc) Environmental testing (soil contamination, asbestos pre-audit) Heritage structures – if your house is heritage listed then additional approvals and cost apply. Additional / Optional Costs Factors that increase cost Larger floor area / multiple storeys Heavy construction materials: double brick, concrete slab, reinforced walls Asbestos or other hazardous materials Poor accessibility: narrow driveway, steep slope, shared access lane Dense surrounds: neighbours very close, requiring protection, special equipment Additional structures: pool, garage, shed, retaining walls Tree/vegetation removal or heritage constraints Remote distance to disposal site or high tip fees Key Factors That Drive Cost Up or Down Factors that reduce cost Smaller home, single storey, lightweight construction Good access for machinery Minimal hazardous materials Site central in Melbourne with easy disposal access Salvageable materials (contractor recovers and offsets cost) Simple block, flat land, no slope or extra structures Key Factors That Drive Cost Up or Down Sample Budget Scenarios Scenario Description Estimated Cost Scenario A – Basic Single-Storey Timber frame, single storey, good access, no asbestos Approx A$15,000-20,000 Scenario B – Standard Brick House Single storey brick veneer, some access constraints, possible asbestos Approx A$25,000-35,000 Scenario C – Large House with Extra Complexity Double storey, concrete slab, partial heritage features, asbestos, poor access Approx A$35,000- 50,000+ Tips to Manage & Reduce Costs Get at least 3 quotes from reputable demolition contractors. Compare inclusions. Ask the contractor to break down the quote: which parts are permits, asbestos, waste, machine, clean-up. Confirm what is covered and what is excluded (e.g., tree removal, hazardous waste, pad removal). Consider salvage: if timber, bricks, leadlight windows are salvageable you might recover some cost or negotiate a lower price. Prepare the site: if you can make access easier, clear items beforehand, you may reduce labour time. Choose a contractor familiar with your local area (Melbourne suburbs) to avoid unexpected travel/disposal costs. Ask about recycling options: some contractors can crush concrete/brick onsite and reduce disposal fees. Beware of hidden costs: tree protection, site remediation, fencing, heritage listing. Time your project: if you bundle demolition + rebuild you might get better pricing or project synergy. Here are key questions you should ask when comparing demolition quotes: What exactly is included? (permits, disconnects, hazardous material removal, waste disposal, site clean up) Are any items excluded or likely to incur additional cost? Will the contractor manage utility disconnections or is that your responsibility? Do they have insurance and relevant licences (especially for asbestos removal) in Victoria? What is the anticipated timeline? How many days will the demolition take? Who will manage the waste disposal and tipping? Where will material go? How is access to the site? Will they need special machinery or neighbour coordination? Can they salvage/recycle materials to offset cost? How will additional cost overruns be handled (for example if asbestos is found)? Request references or past project examples in Melbourne. How to Choose & Compare Quotes Checklist: Demolition Cost Planner Use this checklist to track your budget and quotes: Site inspection completed 3 quotes received Permits & Council fees quoted Utility disconnections cost known Asbestos/hazardous audit done (or cost included) Demolition contractor cost in writing (labour + machinery) Waste removal & disposal cost included (skip bins, tip fees) Site clean-up, remediation, pad removal cost included Additional structures (pool, shed, retaining wall) cost estimated Access issues identified (narrow lane, trees, slope) Salvageable materials reviewed Budget cushion added (suggest +10-15%) for unforeseen costs Checklist: Demolition Cost Planner Use this checklist to track your budget and quotes: Site inspection completed 3 quotes received Permits & Council fees quoted Utility disconnections cost known Asbestos/hazardous audit done (or cost included) Demolition contractor cost in writing (labour + machinery) Waste removal & disposal cost included (skip bins, tip fees) Site clean-up, remediation, pad removal cost included Additional structures (pool, shed, retaining wall) cost estimated Access issues identified (narrow lane, trees, slope) Salvageable materials reviewed Budget cushion added (suggest +10-15%) for unforeseen costs Visit In summary: house demolition in Melbourne can vary widely — from around A$15,000-20,000 for a simple job, up to A$30,000-50,000+ for complex cases. The biggest cost drivers are size, materials, hazards (asbestos), site access and disposal. Next steps: choose your contractors, get detailed quotes, review budget, plan for disposal, and be sure to include a buffer for unexpected costs. With proper planning you’ll be able to move into your next phase (such as rebuild) with confidence. redraptorsdemolition.com.au