Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � Workshop Manual Karoq 2018 ➤ Communication Edition 06.2017 Service Service Department. Technical Information GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � List of Workshop Manual Repair Groups R e p a i r G r o u p 00 - Technical data 91 - Communication Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed. Service All rights reserved. No reproduction without prior agreement from publisher. Copyright © 2017 ŠKODA AUTO a. s. D4B80773BE7 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � Contents 00 - Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Safety precautions for working on vehicles with start-stop system . . . . . . . . . . . . . . . . . . 1 1.2 Safety precautions during road tests in which testing and measuring equipment is used . . 1 2 Repair instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.1 General repair instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.2 Contact corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.3 Cable routing and securing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 91 - Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 Infotainment system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 Installation – Infotainment system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Infotainment system set overview of fitting locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.3 Removing and installing the infotainment system screen . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.4 Removing and installing the control unit for information electronics 1 J794 . . . . . . . . . . . . 9 2 Sound system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.1 Overview of locations where sound system is fitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.2 Removing and installing digital sound package control unit/amplifier . . . . . . . . . . . . . . . . 12 2.3 Removing and installing the rear treble speaker R14 / R16 . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4 Remove and install front tweeters R20 / R22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.5 Removing and installing the rear bass loudspeaker R15 / R17 . . . . . . . . . . . . . . . . . . . . 14 2.6 Removing and installing the front woofers R21 / R23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.7 Removing and installing subwoofer R211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.8 Removing and installing the central speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Aerial systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3.1 Overview of locations where aerial systems are fitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3.2 Removing and installing aerial amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.3 Removing and installing Amplitude modulation (AM) frequency filter R177 . . . . . . . . . . . . 20 3.4 Removing and installing frequency filters for frequency modulation (FM) R178 / R179 . . 20 3.5 Removing and installing roof aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.6 Removing and installing the LTE aerial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.1 Installation - Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 5 Telephone system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5.1 Installation - Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5.2 Phone system overview of fitting locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5.3 Removing and installing the aerial amplifier for mobile phone J984 . . . . . . . . . . . . . . . . . . 25 5.4 Removing and installing the microphone for the telephone R38 . . . . . . . . . . . . . . . . . . . . 26 5.5 Removing and installing storage compartment with interface for mobile telephone R265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 6 Navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6.1 Installation - navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6.2 Installation location overview - navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 7 Rear view camera system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 7.1 Installation - rear view camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 7.2 Summary of components - rear view camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 7.3 Removing and installing the rear view camera R189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 7.4 Removing and installing the rear view camera spray nozzle . . . . . . . . . . . . . . . . . . . . . . . . 31 8 Multi-functional steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 8.1 Installation - multifunction steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 8.2 Removing and installing the multi-function buttons on the steering wheel E441 / E440 . . 32 8.3 Removing and installing the Tiptronic switch in steering wheel E439 / E438 . . . . . . . . . . 33 Karoq 2018 ➤ Communication - Edition 06.2017 Contents i GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 9 Connection for external multimedia devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 9.1 Removing and installing the connection for external audio sources R199 . . . . . . . . . . . . 35 9.2 Removing and installing USB distributor R293 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 10 Mobile services online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 10.1 General description - mobile services online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 10.2 Installation location overview - mobile online services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 10.3 Removing and installing control unit for emergency call module and communication unit J949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 10.4 Removing and installing emergency call button E276 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 10.5 Removing and installing speaker for emergency call module R335 . . . . . . . . . . . . . . . . . . 41 10.6 Removing and installing GSM aerial 2 R267 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 10.7 Replacing battery for control unit for emergency call module and communication unit J949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 10.8 Replacing, adapting and activating control unit for emergency call module and communication unit J949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 10.9 Checking that the components and communication of the ERA Glonass system are functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Karoq 2018 ➤ Communication - Edition 06.2017 ii Contents GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 00 – Technical data 1 Safety instructions (SRL001073; Edition 06.2017) ⇒ “1.1 Safety precautions for working on vehicles with start-stop system”, page 1 ⇒ “1.2 Safety precautions during road tests in which testing and measuring equipment is used”, page 1 1.1 Safety precautions for working on vehi‐ cles with start-stop system When working on vehicles with start/stop system, please observe the following: Caution Risk of injury from automatic engine start. ♦ On vehicles with activated start-stop system (recogniza‐ ble by a message in the dash panel insert) there is a risk that the engine can start automatically. ♦ It is therefore necessary to ensure that the start-stop sys‐ tem is deactivated when carrying out work on the vehicle (switch ignition off, if required switch ignition on again). 1.2 Safety precautions during road tests in which testing and measuring equipment is used Note the following if testers and measuring instruments are used during road tests: WARNING There is a risk of accident from insufficient securing of testers and measuring instruments. There is a hazard from the release of the passenger airbag in the event of an accident. • Drivers operating testing and measuring equipment while driving can lead to an accident. • Increased risk of accident due to unsecured test and measuring devices. Always secure the testing and measuring equipment with a belt on the rear seat and have a second person operate them there. Karoq 2018 ➤ Communication - Edition 06.2017 1. Safety instructions 1 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 2 Repair instructions ⇒ “2.1 General repair instructions”, page 2 ⇒ “2.2 Contact corrosion”, page 2 ⇒ “2.3 Cable routing and securing”, page 3 2.1 General repair instructions All the notes and comments to the following chapters can be found in the Workshop Manual “Electrical System - General notes” ⇒ Electrical System - General notes; Rep. gr. 97 . ♦ Repair the electric wiring harness and connectors ♦ Unlocking and disassembling the socket housing ♦ Clean the contact surfaces ♦ Optical fibre ♦ Vehicle diagnosis, testing and information systems 2.2 Contact corrosion The use of unsuitable connection elements (screws, nuts, wash‐ ers, etc.) causes contact corrosion. This is why only connection elements with a special surface coat‐ ings are fitted. Therefore, the rubber or plastic parts and the adhesives are made from electrically non-conductive materials. In case of doubt regarding the re-use of certain parts, the use of new parts is recommended. WARNING ♦ It is recommended to use only original connection material as well as spare parts which are tested and compatible with aluminium, see ⇒ Electronic Catalogue of Original Parts . ♦ It is recommended to use only Škoda accessories. ♦ Any damage resulting from contact corrosion is not cov‐ ered by the terms of the warranty. Karoq 2018 ➤ Communication - Edition 06.2017 2 Rep. gr.00 - Technical data GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 2.3 Cable routing and securing Caution Risk of damage to cables, risk of fire and failure of onboard electrical system! ♦ To rule out mix ups and ensure the original fitting position, mark the lines before disassembly. This includes lines for fuel, hydraulics, underpressure, activated charcoal filter, or electric cables. Make photos or sketches where nec‐ essary. ♦ To prevent damage to lines, sufficient clearance from all moving or hot components must be ensured in the engine compartment due to its cramped construction. ♦ All plug connections are locked using catches, if neces‐ sary with special securing clips, to prevent them discon‐ necting unintentionally. When connecting, the catches must engage audibly; for plug connections with catch, lock the plug connection by pushing in the catch. If necessary, check it is locked correctly by pulling gently on the plug connection. Example of a connector catch with special securing clip -1- Primary voltage supply in the relay and fuse carrier under the dash panel: Note After connecting the plug -2- to terminal 30+ on the relay and fuse carrier -3-, secure the plug connection by pushing the securing clip -1- in -direction of arrow- up to the stop! Karoq 2018 ➤ Communication - Edition 06.2017 2. Repair instructions 3 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 91 – Communication 1 Infotainment system ⇒ “1.1 Installation – Infotainment system”, page 4 ⇒ “1.2 Infotainment system set overview of fitting locations”, page 6 ⇒ “1.3 Removing and installing the infotainment system screen”, page 7 ⇒ “1.4 Removing and installing the control unit for information electronics 1 J794 ”, page 9 1.1 Installation – Infotainment system ⇒ “1.1.1 General points”, page 4 ⇒ “1.1.2 Infotainment self-diagnosis”, page 4 ⇒ “1.1.3 Electronic anti-theft coding”, page 4 ⇒ “1.1.4 Basic Infotainment features (entry plus)”, page 5 ⇒ “1.1.5 Medium Infotainment features (standard)”, page 5 ⇒ “1.1.6 High Infotainment features (high)”, page 6 1.1.1 General points ♦ Infotainment system = Multimedia information system (MIB – modular infotainment kit). ♦ It enables the driver to access the vehicle setting, assistance systems and comfort functions via a single system. ♦ Even the basic version can fully cover the entertainment, com‐ munication and vehicle interaction needs of the vehicle occu‐ pants. Further information and description of function: ⇒ Karoq Owner’s Manual ⇒ Current flow diagrams, Electrical fault finding and Fitting loca‐ tions 1.1.2 Infotainment self-diagnosis Performing the "self-diagnosis" with ⇒ Vehicle diagnostic tester 1.1.3 Electronic anti-theft coding The Infotainment display/control unit is equipped with an elec‐ tronic comfort anti-theft coding, which operates in combination with the dash panel insert. The Infotainment display/control unit must be coupled with an ap‐ propriate vehicle using the ⇒ Vehicle diagnostic tester. The se‐ curity code is no longer entered. The Infotainment display/control unit, which is installed at the fac‐ tory, is coupled only when it is used for the first time with the corresponding vehicle. If the battery is disconnected and then re‐ connected or if the Infotainment display/control unit is removed from a vehicle and then re-installed in the same vehicle, coupling with the corresponding vehicle is no longer valid. If the dash panel insert is replaced, the Infotainment display/con‐ trol unit must be coupled with the relevant vehicle once again. Karoq 2018 ➤ Communication - Edition 06.2017 4 Rep. gr.91 - Communication GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � The user must have a valid authorisation to use a programme for coupling the Infotainment display/control unit. 1.1.4 Basic Infotainment features (entry plus) Swing installation Display unit for control unit of the display and operating unit, front information - J685- Note Comprehensive description of infotainment functions and con‐ trols, depending on model year ⇒ Karoq Owner's Manual . 1.1.5 Medium Infotainment features (stand‐ ard) Bolero, Amundsen installation 1 - Display unit for control unit of the display and operating unit, front information - J685- 2 - Control unit for IT 1 - J794- Note Comprehensive description of infotainment functions and con‐ trols, depending on model year ⇒ Karoq Owner's Manual . Karoq 2018 ➤ Communication - Edition 06.2017 1. Infotainment system 5 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 1.1.6 High Infotainment features (high) Columbus 1 - Display unit for control unit of the display and operating unit, front information - J685- 2 - Control unit for IT 1 - J794- Note Comprehensive description of infotainment functions and con‐ trols, depending on model year ⇒ Karoq Owner's Manual . 1.2 Infotainment system set overview of fitting locations Note The number and the design of the components depend on the vehicle equipment. Karoq 2018 ➤ Communication - Edition 06.2017 6 Rep. gr.91 - Communication GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 1 - Multi-functional steering wheel ❑ Description and body work ⇒ “8.1 Installation - mul‐ tifunction steering wheel”, page 32 2 - Display unit for control unit of the display and operating unit, front information - J685- ❑ Removing and installing ⇒ “1.3 Removing and in‐ stalling the infotainment system screen”, page 7 3 - Control unit for IT 1 - J794- ❑ Removing and installing ⇒ “1.4 Removing and in‐ stalling the control unit for information electron‐ ics 1 J794 ”, page 9 4 - Roof aerial ❑ for GPS signal receipt ❑ Additional information, removing and installing ⇒ “3.5 Removing and in‐ stalling roof aerial”, page 21 5 - Rear window aerial ❑ not replaceable individ‐ ually ❑ Removing and installing ⇒ General body repairs, exterior; Rep. gr. 64 ; Rear window; Remov‐ ing and installing rear window ❑ Additional information and aerial overview ⇒ “3.1 Overview of locations where aerial systems are fitted”, page 17 6 - Connections for external audio/video sources ❑ in the rear centre console ❑ Removing and installing ⇒ “9.1 Removing and installing the connection for external audio sources R199 ”, page 35 7 - Connections for external audio/video sources ❑ Removing and installing ⇒ “9.1 Removing and installing the connection for external audio sources R199 ”, page 35 ❑ in the front centre console 8 - Digital sound package control unit/amplifier ❑ Removing and installing ⇒ “2.2 Removing and installing digital sound package control unit/amplifier”, page 12 1.3 Removing and installing the infotain‐ ment system screen Special tools and workshop equipment required ♦ Release tool - T10057- Karoq 2018 ➤ Communication - Edition 06.2017 1. Infotainment system 7 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � ♦ Disassembly wedge - 3409- Removing – Switch off the ignition and all electrical components. Caution Risk of damaging the infotainment screen. ♦ Slowly and carefully slide in the release tool and then re‐ move the display unit. – Insert unlocking tools into the openings in the display unit -see fig.- until there is an audible click. “Bolero”, “Amundsen” and “Columbus” equipment – Pull on the release tools -arrows- to remove the display unit -1-. – Release and disconnect the plug connections. – Press back catches from the side and remove the unlocking tools. “Swing” equipment The Infotainment display and control unit forms a single unit. – Remove the data storage device that is still in the unit. – Remove the infotainment display and control unit -1- by pulling on the unlocking tools -arrows-. – Compress plug catch -arrows-. Karoq 2018 ➤ Communication - Edition 06.2017 8 Rep. gr.91 - Communication GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � – Open catch clamp -arrow- and disconnect plug. – Release and pull off other plug connections. – Press back catches from the side and remove the unlocking tools. Installing Installation is performed in the reverse order, pay attention to the following points: Note When inserting the display unit, never press on the screen or on the buttons, as this could cause damage. When replacing the Display unit for the display and control unit control device, information at the front - J685- (applies to Info‐ tainment Swing, where the Infotainment Display and Control Unit is one unit) ⇒ “1.1.3 Electronic anti-theft coding”, page 4 . 1.4 Removing and installing the control unit for information electronics 1 - J794- Removing – Remove the data storage device that is still in the Infotainment control unit ⇒ Karoq Owner's Manual . – Switch off the ignition and all electrical components. – Remove glove compartment with frame on the front passenger side and rotate slightly downwards ⇒ General body repairs, interior; Rep. gr. 68 ; Compartments/covers; Removing and installing glove compartment . – Separate the retaining clip of the wiring loom between the in‐ fotainment control unit and the dash panel cross member. – Insert unlocking tools into the openings in the control unit -see fig.- until there is an audible click. Note Mask the lower edge of the assembly opening with commercially available tape that will not scratch the lining when the connectors are removed. – Pull on the release tools -arrows- to remove the control unit -1-. Karoq 2018 ➤ Communication - Edition 06.2017 1. Infotainment system 9 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � – Compress plug catch -arrows-. – Open catch clamp -arrow- and disconnect plug. – Release and pull off other plug connections. Installing Installation is performed in the reverse order, pay attention to the following points: When replacing, couple the Infotainment control unit (see ⇒ “1.1.3 Electronic anti-theft coding”, page 4 ). Karoq 2018 ➤ Communication - Edition 06.2017 10 Rep. gr.91 - Communication GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 2 Sound system ⇒ “2.1 Overview of locations where sound system is fitted”, page 11 ⇒ “2.2 Removing and installing digital sound package control unit/ amplifier”, page 12 ⇒ “2.3 Removing and installing the rear treble speaker R14 / R16 ”, page 13 ⇒ “2.4 Remove and install front tweeters R20 / R22 ”, page 14 ⇒ “2.5 Removing and installing the rear bass loudspeaker R15 / R17 ”, page 14 ⇒ “2.6 Removing and installing the front woofers R21 / R23 ”, page 14 ⇒ “2.7 Removing and installing subwoofer R211 ”, page 15 ⇒ “2.8 Removing and installing the central speaker”, page 15 2.1 Overview of locations where sound system is fitted Note The number and type of component depends on the vehicle equipment ⇒ Electronic catalogue of the original parts “ETKA” . Karoq 2018 ➤ Communication - Edition 06.2017 2. Sound system 11 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � 1 - Front treble speaker ❑ Removing and installing ⇒ “2.4 Remove and in‐ stall front tweeters R20 / R22 ”, page 14 2 - Central speaker ❑ In the centre of the dash panel ❑ Removing and installing ⇒ “2.8 Removing and in‐ stalling the central speaker”, page 15 3 - Rear treble speaker ❑ Removing and installing ⇒ “2.3 Removing and in‐ stalling the rear treble speaker R14 / R16 ”, page 13 4 - Subwoofer ❑ Removing and installing ⇒ “2.7 Removing and installing subwoofer R211 ”, page 15 5 - Rear bass speaker ❑ Removing and installing ⇒ “2.5 Removing and in‐ stalling the rear bass loudspeaker R15 / R17 ”, page 14 6 - Digital sound package con‐ trol unit - J525- ❑ Removing and installing ⇒ “2.2 Removing and in‐ stalling digital sound package control unit/ amplifier”, page 12 7 - Front bass speaker ❑ Removing and installing ⇒ “2.6 Removing and installing the front woofers R21 / R23 ”, page 14 2.2 Removing and installing digital sound package control unit/amplifier Removing – Switch off all electrical components and take out the ignition key. – Push the left front seat completely towards the rear and the highest point. Karoq 2018 ➤ Communication - Edition 06.2017 12 Rep. gr.91 - Communication GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � – Remove expanding rivets -2- and remove cover -1- towards the front. – Remove screws -2-. – Gently swivel out the control unit -1- and pull it out of the holder -3-. – Slacken by tilting out the clamp and disconnect the plug con‐ nection. – Release and disconnect the “MOST bus” databus -2-. – Protect socket for MOST-Bus Databus -2- with cover -1-. You can also use another suitable way (e.g. wrap around a clean film and tape up). Installing Installation is performed in the reverse order, pay attention to the following points: – When replacing, code the new control unit with the ⇒ Vehicle diagnostic tester. – If the MOST-Bus data bus is damaged, replace databus with end pieces ⇒ Electronic Catalogue of Original Parts , if nec‐ essary, re-generate “Electrical System- General Notes” ⇒ Electrical System - General Notes; Rep. gr. 97 . Specified torques Component Nm Screw of the control unit 1.5 Nm 2.3 Removing and installing the rear treble speaker -R14- / -R16- Removing – Remove rear door trim ⇒ General body repairs, interior; Rep. gr. 70 ; Inner lining of the door panel rear; removing and in‐ stalling rear door trim . Karoq 2018 ➤ Communication - Edition 06.2017 2. Sound system 13 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � – Carefully drill out the heads of the plastic rivets -1- with a suit‐ able drill and remove the speaker -2-. – Remove remains of the plastic rivets (cut off, grind down). Installing Installation is performed in the reverse order, pay attention to the following points: – Secure new speaker -2- with screws -3- (see ⇒ Electronic Catalogue of Original Parts “ETKA” ). Specified torques Component Nm Fixing screws for speakers 0.5 Nm 2.4 Remove and install front tweeters - R20- / -R22- Front tweeter is integrated into the A-pillar trim at the top. Replace the AS column cover if damaged ⇒ Body - assembly work inside; Rep. gr. 70 ; Interior finishings; removing and installing A-pillars and ⇒ Electronic catalogue of the original parts “ETKA” . 2.5 Removing and installing the rear bass loudspeaker -R15- / -R17- Removing – Switch off the ignition and all electrical components. – Remove the door trim panel from which you are removing the speaker ⇒ General body repairs, interior; Rep. gr. 70 ; Rear door trim panels; Removing and installing rear door trim . – Disconnect socket connector at the loudspeaker. – Drill out the rivets -1- with a suitable drill and remove the speaker -2-. Caution ♦ It is important to remove all the drill swarf from the door since it can otherwise lead to corrosion. ♦ Any damage to the paintwork which is caused by drilling out the rivets must be repaired immediately by a specialist. Installing Installation is carried out in the reverse order. 2.6 Removing and installing the front woof‐ ers -R21- / -R23- Removing – Switch off the ignition and all electrical components. Karoq 2018 ➤ Communication - Edition 06.2017 14 Rep. gr.91 - Communication GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � – Remove the door trim panel from which you are removing the speaker ⇒ General body repairs, interior; Rep. gr. 70 ; Front door trim panels; Removing and installing front door trim . – Disconnect socket connector at the loudspeaker. – Drill out the rivets -1- with a suitable drill and remove the speaker -2-. Caution ♦ It is important to remove all the drill swarf from the door since it can otherwise lead to corrosion. ♦ Any damage to the paintwork which is caused by drilling out the rivets must be repaired immediately by a specialist. Installing Installation is carried out in the reverse order. 2.7 Removing and installing subwoofer - R211- The subwoofer - R211- is located in the recess for the spare wheel. Removing – Switch off the ignition and all electrical components. – Raise and lock luggage compartment floor ⇒ General body repairs, interior; Rep. gr. 70 ; Luggage compartment trim pan‐ els; Removing and installing luggage compartment side trim panel . – Unlock the plug connection -2- and disconnect. – Unscrew securing nut -3- and remove subwoofer -1-. Installing Installation is carried out in the reverse order. Specified torques Component Nm Screw of the subwoofer 3 Nm Nut of the subwoofer 3 Nm 2.8 Removing and installing the central speaker Special tools and workshop equipment required ♦ Disassembly wedge - 3409- Only on vehicles with the equipment “Soundsystem” Removing Caution When using the lever tool, mask points where the lever tool is applied using commercially available adhesive tape. Karoq 2018 ➤ Communication - Edition 06.2017 2. Sound system 15 GETtheMANUALS.org Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S. � – Switch off the ignition and all electrical components. – Unclip cover -1- with the disassembly wedge and remove from the dash panel -arrows-. – Unscrew screws -1- and remove speaker -2-. – Disconnect plug. Installing Installation is performed in the reverse order, pay attention to the following points: Specified torques Component Nm Screws of the speaker 1 Nm Karoq 2018 ➤ Communication - Edition 06.2017 16 Rep. gr.91 - Communication GETtheMANUALS.org