ROOF INSPECTIONS: SIMPLE STEPS TO PROTECT YOUR HOME https://www.roofingdalco.com/ A roof protects your home from rain, wind, heat, and storms. Over time, small issues can develop even when the roof looks fine from the ground. Missing shingles, loose flashing, poor drainage, or early signs of water damage may become bigger concerns if they are left unchecked. Regular roof care can help homeowners notice these problems sooner. A roof inspection Arlington can provide a closer look at the roofing system and help identify areas that may need attention. Knowing what to check and when to seek professional help can make roof maintenance easier and help protect your home. STEP 1: LOOK AT THE ROOF FROM THE GROUND STEP 1: LOOK AT THE ROOF FROM THE GROUND Start by checking the roof from a safe location. Look for shingles that appear missing, cracked, curled, or out of place. You can also check for roofing materials in the yard. Pieces of shingles or other materials may be signs of recent storm damage. Do not climb onto the roof during a basic inspection. A roof can be slippery or unsafe, especially after rain or severe weather. STEP 2: CHECK FOR WATER DAMAGE STEP 2: CHECK FOR WATER DAMAGE Water damage inside your home can be an early sign of a roofing problem. Check ceilings, walls, and attic spaces for changes. Look for: ●Water stains ●Damp areas ●Peeling paint ●Dark spots ●Musty odors ●Wet insulation A water stain does not always appear directly below the damaged roof area. Water can move through different parts of the roofing system before reaching the inside of the home. STEP 3: EXAMINE THE GUTTERS Gutters help move rainwater away from the roof and home. When they become blocked, water may not drain properly. Look for leaves, twigs, dirt, or other debris inside the gutters. Also check for loose sections, visible damage, or areas where water may not flow correctly. Keeping gutters clean can support better drainage and help reduce water-related roof problems. STEP 4: CHECK THE FLASHING STEP 4: CHECK THE FLASHING Flashing helps protect areas where the roof meets walls, vents, chimneys, and other openings. Loose, cracked, or damaged flashing can create weak points where water may enter. These areas can be difficult to check closely from the ground, so they may need professional attention. A closer inspection can help determine whether flashing is still providing proper protection. THANK THANK YOU! CONTACT US https://www.roofingdalco.com/ 214632-7177