Download Valid Splunk SPLK-2002 Exam Dumps for Success 1 / 10 Exam : SPLK-2002 Title : https://www.passcert.com/SPLK-2002.html Splunk Enterprise Certified Architect Exam Download Valid Splunk SPLK-2002 Exam Dumps for Success 2 / 10 1.Which of the following will cause the greatest reduction in disk size requirements for a cluster of N indexers running Splunk Enterprise Security? A. Setting the cluster search factor to N-1. B. Increasing the number of buckets per index. C. Decreasing the data model acceleration range. D. Setting the cluster replication factor to N-1. Answer: C Explanation: Decreasing the data model acceleration range will reduce the disk size requirements for a cluster of indexers running Splunk Enterprise Security. Data model acceleration creates tsidx files that consume disk space on the indexers. Reducing the acceleration range will limit the amount of data that is accelerated and thus save disk space. Setting the cluster search factor or replication factor to N-1 will not reduce the disk size requirements, but rather increase the risk of data loss. Increasing the number of buckets per index will also increase the disk size requirements, as each bucket has a minimum size. For more information, see Data model acceleration and Bucket size in the Splunk documentation. 2.Stakeholders have identified high availability for searchable data as their top priority. Which of the following best addresses this requirement? A. Increasing the search factor in the cluster. B. Increasing the replication factor in the cluster. C. Increasing the number of search heads in the cluster. D. Increasing the number of CPUs on the indexers in the cluster. Answer: A Explanation: Increasing the search factor in the cluster will best address the requirement of high availability for searchable data. The search factor determines how many copies of searchable data are maintained by the cluster. A higher search factor means that more indexers can serve the data in case of a failure or a maintenance event. Increasing the replication factor will improve the availability of raw data, but not searchable data. Increasing the number of search heads or CPUs on the indexers will improve the search performance, but not the availability of searchable data. For more information, see Replication factor and search factor in the Splunk documentation. 3.Search dashboards in the Monitoring Console indicate that the distributed deployment is approaching its capacity. Which of the following options will provide the most search performance improvement? A. Replace the indexer storage to solid state drives (SSD). B. Add more search heads and redistribute users based on the search type. C. Look for slow searches and reschedule them to run during an off-peak time. D. Add more search peers and make sure forwarders distribute data evenly across all indexers. Answer: D Explanation: Adding more search peers and making sure forwarders distribute data evenly across all indexers will provide the most search performance improvement when the distributed deployment is approaching its capacity. Adding more search peers will increase the search concurrency and reduce the load on each Download Valid Splunk SPLK-2002 Exam Dumps for Success 3 / 10 indexer. Distributing data evenly across all indexers will ensure that the search workload is balanced and no indexer becomes a bottleneck. Replacing the indexer storage to SSD will improve the search performance, but it is a costly and time-consuming option. Adding more search heads will not improve the search performance if the indexers are the bottleneck. Rescheduling slow searches to run during an off-peak time will reduce the search contention, but it will not improve the search performance for each individual search. For more information, see [Scale your indexer cluster] and [Distribute data across your indexers] in the Splunk documentation. 4.A Splunk architect has inherited the Splunk deployment at Buttercup Games and end users are complaining that the events are inconsistently formatted for a web source. Further investigation reveals that not all weblogs flow through the same infrastructure: some of the data goes through heavy forwarders and some of the forwarders are managed by another department. Which of the following items might be the cause of this issue? A. The search head may have different configurations than the indexers. B. The data inputs are not properly configured across all the forwarders. C. The indexers may have different configurations than the heavy forwarders. D. The forwarders managed by the other department are an older version than the rest. Answer: C Explanation: The indexers may have different configurations than the heavy forwarders, which might cause the issue of inconsistently formatted events for a web sourcetype. The heavy forwarders perform parsing and indexing on the data before sending it to the indexers. If the indexers have different configurations than the heavy forwarders, such as different props.conf or transforms.conf settings, the data may be parsed or indexed differently on the indexers, resulting in inconsistent events. The search head configurations do not affect the event formatting, as the search head does not parse or index the data. The data inputs configurations on the forwarders do not affect the event formatting, as the data inputs only determine what data to collect and how to monitor it. The forwarder version does not affect the event formatting, as long as the forwarder is compatible with the indexer. For more information, see [Heavy forwarder versus indexer] and [Configure event processing] in the Splunk documentation. 5.A customer has installed a 500GB Enterprise license. They also purchased and installed a 300GB, no enforcement license on the same license master. How much data can the customer ingest before the search is locked out? A. 300GB. After this limit, the search is locked out. B. 500GB. After this limit, the search is locked out. C. 800GB. After this limit, the search is locked out. D. Search is not locked out. Violations are still recorded. Answer: D Explanation: Search is not locked out when a customer has installed a 500GB Enterprise license and a 300GB, no enforcement license on the same license master. The no enforcement license allows the customer to exceed the license quota without locking search, but violations are still recorded. The customer can ingest up to 800GB of data per day without violating the license, but if they ingest more than that, they will incur a violation. However, the violation will not lock search, as the no enforcement license overrides the Download Valid Splunk SPLK-2002 Exam Dumps for Success 4 / 10 enforcement policy of the Enterprise license. For more information, see [No enforcement licenses] and [License violations] in the Splunk documentation. 6.What does the deployer do in a Search Head Cluster (SHC)? (Select all that apply.) A. Distributes apps to SHC members. B. Bootstraps a clean Splunk install for a SHC. C. Distributes non-search-related and manual configuration file changes. D. Distributes runtime knowledge object changes made by users across the SHC. Answer: A,C Explanation: The deployer distributes apps and non-search related and manual configuration file changes to the search head cluster members. The deployer does not bootstrap a clean Splunk install for a search head cluster, as this is done by the captain. The deployer also does not distribute runtime knowledge object changes made by users across the search head cluster, as this is done by the replication factor. For more information, see Use the deployer to distribute apps and configuration updates in the Splunk documentation. 7.When using the props.conf LINE_BREAKER attribute to delimit multi-line events, the SHOULD_LINEMERGE attribute should be set to what? A. Auto B. None C. True D. False Answer: D Explanation: When using the props.conf LINE_BREAKER attribute to delimit multi-line events, the SHOULD_LINEMERGE attribute should be set to false. This tells Splunk not to merge events that have been broken by the LINE_BREAKER. Setting the SHOULD_LINEMERGE attribute to true, auto, or none will cause Splunk to ignore the LINE_BREAKER and merge events based on other criteria. For more information, see Configure event line breaking in the Splunk documentation. 8.Which of the following should be included in a deployment plan? A. Business continuity and disaster recovery plans. B. Current logging details and data source inventory. C. Current and future topology diagrams of the IT environment. D. A comprehensive list of stakeholders, either direct or indirect. Answer: A,B,C Explanation: A deployment plan should include business continuity and disaster recovery plans, current logging details and data source inventory, and current and future topology diagrams of the IT environment. These elements are essential for planning, designing, and implementing a Splunk deployment that meets the business and technical requirements. A comprehensive list of stakeholders, either direct or indirect, is not part of the deployment plan, but rather part of the project charter. For more information, see Deployment planning in the Splunk documentation. Download Valid Splunk SPLK-2002 Exam Dumps for Success 5 / 10 9.A multi-site indexer cluster can be configured using which of the following? (Select all that apply.) A. Via Splunk Web. B. Directly edit SPLUNK_HOME/etc./system/local/server.conf C. Run a Splunk edit cluster-config command from the CLI. D. Directly edit SPLUNK_HOME/etc/system/default/server.conf Answer: B,C Explanation: A multi-site indexer cluster can be configured by directly editing SPLUNK_HOME/etc/system/local/server.conf or running a splunk edit cluster-config command from the CLI. These methods allow the administrator to specify the site attribute for each indexer node and the site_replication_factor and site_search_factor for the cluster. Configuring a multi-site indexer cluster via Splunk Web or directly editing SPLUNK_HOME/etc/system/default/server.conf are not supported methods. For more information, see Configure the indexer cluster with server.conf in the Splunk documentation. 10.Which index-time props.conf attributes impact indexing performance? (Select all that apply.) A. REPORT B. LINE_BREAKER C. ANNOTATE_PUNCT D. SHOULD_LINEMERGE Answer: B,D Explanation: The index-time props.conf attributes that impact indexing performance are LINE_BREAKER and SHOULD_LINEMERGE. These attributes determine how Splunk breaks the incoming data into events and whether it merges multiple events into one. These operations can affect the indexing speed and the disk space consumption. The REPORT attribute does not impact indexing performance, as it is used to apply transforms at search time. The ANNOTATE_PUNCT attribute does not impact indexing performance, as it is used to add punctuation metadata to events at search time. For more information, see [About props.conf and transforms.conf] in the Splunk documentation. 11.Which of the following are client filters available in serverclass.conf? (Select all that apply.) A. DNS name. B. IP address. C. Splunk server role. D. Platform (machine type). Answer: A,B,D Explanation: The client filters available in serverclass.conf are DNS name, IP address, and platform (machine type). These filters allow the administrator to specify which forwarders belong to a server class and receive the apps and configurations from the deployment server. The Splunk server role is not a valid client filter in serverclass.conf, as it is not a property of the forwarder. For more information, see [Use forwarder management filters] in the Splunk documentation. Download Valid Splunk SPLK-2002 Exam Dumps for Success 6 / 10 12.What log file would you search to verify if you suspect there is a problem interpreting a regular expression in a monitor stanza? A. btool.log B. metrics.log C. splunkd.log D. tailing_processor.log Answer: D Explanation: The tailing_processor.log file would be the best place to search if you suspect there is a problem interpreting a regular expression in a monitor stanza. This log file contains information about how Splunk monitors files and directories, including any errors or warnings related to parsing the monitor stanza. The splunkd.log file contains general information about the Splunk daemon, but it may not have the specific details about the monitor stanza. The btool.log file contains information about the configuration files, but it does not log the runtime behavior of the monitor stanza. The metrics.log file contains information about the performance metrics of Splunk, but it does not log the event breaking issues. For more information, see About Splunk Enterprise logging in the Splunk documentation. 13.Which Splunk tool offers a health check for administrators to evaluate the health of their Splunk deployment? A. btool B. DiagGen C. SPL Clinic D. Monitoring Console Answer: D Explanation: The Monitoring Console is the Splunk tool that offers a health check for administrators to evaluate the health of their Splunk deployment. The Monitoring Console provides dashboards and alerts that show the status and performance of various Splunk components, such as indexers, search heads, forwarders, license usage, and search activity. The Monitoring Console can also run health checks on the deployment and identify any issues or recommendations. The btool is a command-line tool that shows the effective settings of the configuration files, but it does not offer a health check. The DiagGen is a tool that generates diagnostic snapshots of the Splunk environment, but it does not offer a health check. The SPL Clinic is a tool that analyzes and optimizes SPL queries, but it does not offer a health check. For more information, see About the Monitoring Console in the Splunk documentation. 14.In a four site indexer cluster, which configuration stores two searchable copies at the origin site, one searchable copy at site2, and a total of four searchable copies? A. site_search_factor = origin:2, site1:2, total:4 B. site_search_factor = origin:2, site2:1, total:4 C. site_replication_factor = origin:2, site1:2, total:4 D. site_replication_factor = origin:2, site2:1, total:4 Answer: B Explanation: In a four site indexer cluster, the configuration that stores two searchable copies at the origin site, one Download Valid Splunk SPLK-2002 Exam Dumps for Success 7 / 10 searchable copy at site2, and a total of four searchable copies is site_search_factor = origin:2, site2:1, total:4. This configuration tells the cluster to maintain two copies of searchable data at the site where the data originates, one copy of searchable data at site2, and a total of four copies of searchable data across all sites. The site_search_factor determines how many copies of searchable data are maintained by the cluster for each site. The site_replication_factor determines how many copies of raw data are maintained by the cluster for each site. For more information, see Configure multisite indexer clusters with server.conf in the Splunk documentation. 15.Which of the following is true regarding Splunk Enterprise's performance? (Select all that apply.) A. Adding search peers increases the maximum size of search results. B. Adding RAM to existing search heads provides additional search capacity. C. Adding search peers increases the search throughput as the search load increases. D. Adding search heads provides additional CPU cores to run more concurrent searches. Answer: C,D Explanation: The following statements are true regarding Splunk Enterprise performance: Adding search peers increases the search throughput as search load increases. This is because adding more search peers distributes the search workload across more indexers, which reduces the load on each indexer and improves the search speed and concurrency. Adding search heads provides additional CPU cores to run more concurrent searches. This is because adding more search heads increases the number of search processes that can run in parallel, which improves the search performance and scalability. The following statements are false regarding Splunk Enterprise performance: Adding search peers does not increase the maximum size of search results. The maximum size of search results is determined by the maxresultrows setting in the limits.conf file, which is independent of the number of search peers. Adding RAM to an existing search head does not provide additional search capacity. The search capacity of a search head is determined by the number of CPU cores, not the amount of RAM. Adding RAM to a search head may improve the search performance, but not the search capacity. For more information, see Splunk Enterprise performance in the Splunk documentation. 16.Which Splunk Enterprise offering has its own license? A. Splunk Cloud Forwarder B. Splunk Heavy Forwarder C. Splunk Universal Forwarder D. Splunk Forwarder Management Answer: C Explanation: The Splunk Universal Forwarder is the only Splunk Enterprise offering that has its own license. The Splunk Universal Forwarder license allows the forwarder to send data to any Splunk Enterprise or Splunk Cloud instance without consuming any license quota. The Splunk Heavy Forwarder does not have its own license, but rather consumes the license quota of the Splunk Enterprise or Splunk Cloud instance that it sends data to. The Splunk Cloud Forwarder and the Splunk Forwarder Management are not separate Splunk Enterprise offerings, but rather features of the Splunk Cloud service. For more information, see Download Valid Splunk SPLK-2002 Exam Dumps for Success 8 / 10 [About forwarder licensing] in the Splunk documentation. 17.Which component in the splunkd.log will log information related to bad event breaking? A. Audittrail B. EventBreaking C. IndexingPipeline D. AggregatorMiningProcessor Answer: D Explanation: The AggregatorMiningProcessor component in the splunkd.log file will log information related to bad event breaking. The AggregatorMiningProcessor is responsible for breaking the incoming data into events and applying the props.conf settings. If there is a problem with the event breaking, such as incorrect timestamps, missing events, or merged events, the AggregatorMiningProcessor will log the error or warning messages in the splunkd.log file. The Audittrail component logs information about the audit events, such as user actions, configuration changes, and search activity. The EventBreaking component logs information about the event breaking rules, such as the LINE_BREAKER and SHOULD_LINEMERGE settings. The IndexingPipeline component logs information about the indexing pipeline, such as the parsing, routing, and indexing phases. For more information, see About Splunk Enterprise logging and [Configure event line breaking] in the Splunk documentation. 18.Which Splunk server role regulates the functioning of indexer cluster? A. Indexer B. Deployer C. Master Node D. Monitoring Console Answer: C Explanation: The master node is the Splunk server role that regulates the functioning of the indexer cluster. The master node coordinates the activities of the peer nodes, such as data replication, data searchability, and data recovery. The master node also manages the cluster configuration bundle and distributes it to the peer nodes. The indexer is the Splunk server role that indexes the incoming data and makes it searchable. The deployer is the Splunk server role that distributes apps and configuration updates to the search head cluster members. The monitoring console is the Splunk server role that monitors the health and performance of the Splunk deployment. For more information, see About indexer clusters and index replication in the Splunk documentation. 19.When adding or rejoining a member to a search head cluster, the following error is displayed: Error pulling configurations from the search head cluster captain; consider performing a destructive configuration resync on this search head cluster member. What corrective action should be taken? A. Restart the search head. B. Run the splunk apply shcluster-bundle command from the deployer. C. Run the clean raft command on all members of the search head cluster. Download Valid Splunk SPLK-2002 Exam Dumps for Success 9 / 10 D. Run the splunk resync shcluster-replicated-config command on this member. Answer: D Explanation: When adding or rejoining a member to a search head cluster, and the following error is displayed: Error pulling configurations from the search head cluster captain; consider performing a destructive configuration resync on this search head cluster member. The corrective action that should be taken is to run the splunk resync shcluster-replicated-config command on this member. This command will delete the existing configuration files on this member and replace them with the latest configuration files from the captain. This will ensure that the member has the same configuration as the rest of the cluster. Restarting the search head, running the splunk apply shcluster-bundle command from the deployer, or running the clean raft command on all members of the search head cluster are not the correct actions to take in this scenario. For more information, see Resolve configuration inconsistencies across cluster members in the Splunk documentation. 20.Which of the following commands is used to clear the KV store? A. splunk clean kvstore B. splunk clear kvstore C. splunk delete kvstore D. splunk reinitialize kvstore Answer: A Explanation: The splunk clean kvstore command is used to clear the KV store. This command will delete all the collections and documents in the KV store and reset it to an empty state. This command can be useful for troubleshooting KV store issues or resetting the KV store data. The splunk clear kvstore, splunk delete kvstore, and splunk reinitialize kvstore commands are not valid Splunk commands. For more information, see Use the CLI to manage the KV store in the Splunk documentation. 21.Indexing is slow and real-time search results are delayed in a Splunk environment with two indexers and one search head. There is ample CPU and memory available on the indexers. Which of the following is most likely to improve indexing performance? A. Increase the maximum number of hot buckets in indexes.conf B. Increase the number of parallel ingestion pipelines in server.conf C. Decrease the maximum size of the search pipelines in limits.conf D. Decrease the maximum concurrent scheduled searches in limits.conf Answer: B Explanation: Increasing the number of parallel ingestion pipelines in server.conf is most likely to improve indexing performance when indexing is slow and real-time search results are delayed in a Splunk environment with two indexers and one search head. The parallel ingestion pipelines allow Splunk to process multiple data streams simultaneously, which increases the indexing throughput and reduces the indexing latency. Increasing the maximum number of hot buckets in indexes.conf will not improve indexing performance, but rather increase the disk space consumption and the bucket rolling time. Decreasing the maximum size of the search pipelines in limits.conf will not improve indexing performance, but rather reduce the search performance and the search concurrency. Decreasing the maximum concurrent scheduled Download Valid Splunk SPLK-2002 Exam Dumps for Success 10 / 10 searches in limits.conf will not improve indexing performance, but rather reduce the search capacity and the search availability. For more information, see Configure parallel ingestion pipelines in the Splunk documentation. 22.The guidance Splunk gives for estimating size on for syslog data is 50% of original data size. How does this divide between files in the index? A. rawdata is: 10%, tsidx is: 40% B. rawdata is: 15%, tsidx is: 35% C. rawdata is: 35%, tsidx is: 15% D. rawdata is: 40%, tsidx is: 10% Answer: B Explanation: The guidance Splunk gives for estimating size on for syslog data is 50% of original data size. This divides between files in the index as follows: rawdata is 15%, tsidx is 35%. The rawdata is the compressed version of the original data, which typically takes about 15% of the original data size. The tsidx is the index file that contains the time-series metadata and the inverted index, which typically takes about 35% of the original data size. The total size of the rawdata and the tsidx is about 50% of the original data size. For more information, see [Estimate your storage requirements] in the Splunk documentation. 23.In an existing Splunk environment, the new index buckets that are created each day are about half the size of the incoming data. Within each bucket, about 30% of the space is used for rawdata and about 70% for index files. What additional information is needed to calculate the daily disk consumption, per indexer, if indexer clustering is implemented? A. Total daily indexing volume, number of peer nodes, and number of accelerated searches. B. Total daily indexing volume, number of peer nodes, replication factor, and search factor. C. Total daily indexing volume, replication factor, search factor, and number of search heads. D. Replication factor, search factor, number of accelerated searches, and total disk size across cluster. Answer: B Explanation: The additional information that is needed to calculate the daily disk consumption, per indexer, if indexer clustering is implemented, is the total daily indexing volume, the number of peer nodes, the replication factor, and the search factor. These information are required to estimate how much data is ingested, how many copies of raw data and searchable data are maintained, and how many indexers are involved in the cluster. The number of accelerated searches, the number of search heads, and the total disk size across the cluster are not relevant for calculating the daily disk consumption, per indexer. For more information, see [Estimate your storage requirements] in the Splunk documentation.