Pacific Beer Equipment | www.beerequipment.com | 1-888-225-2256 Page 1 BEER FOAM CONTROL Stop Wasting Beer at Every Keg Change | Powered by the DFC 9500 / DFC 9600 Your draught dollars are going down the drain — every keg, every day. Effective Beer Foam Control is the difference between pouring profit and pouring foam. Pacific Beer Equipment's renowned Draught Foam Control device, the DFC 9500 / DFC 9600 (also known as a beer FOB), stops beer flow the instant a keg empties, at both the keg and the tap. That eliminates the spitting and spraying that happens when a keg “blows” and keeps your supply lines full of beer, so a freshly tapped keg pours instant beer , not foam. What Is Beer Foam Control? A beer foam control device is installed at the keg connector to prevent gas and foam from rushing down the line when a keg runs dry. Without keg foam control, bartenders must pour off foam to reach clear beer, wasting product, time and money. With a proven draft beer foam control system, the beer line stays full during changeover, and the waste disappears. Drain Your Keg, Not Your Wallet Independent testing by various North American breweries has shown that the DFC 9500 / DFC 9600 saves an average of one pitcher of beer per keg on a typical long-draw run, with much greater savings at stadiums, airports and hotels. With roughly 40 pitchers in a keg and a volume of 40 kegs per week, bars, pubs, clubs and restaurants can save one keg a week — 52 kegs a year . Owners see a very fast return on investment with this beer foam control solution. Average Savings Per Keg Change (3/8 ′′ Supply Line) Beer Line Length Beer Saved Per Keg Change 10 ft 6 oz 30 ft 18 oz 100 ft 50 oz (2.5 pints) 150 ft 75 oz (almost 4 pints!) Key Benefits of the DFC 9500 / DFC 9600 • Instant shut-off: stops flow when the keg empties, keeping lines full for superior beer foam control at every changeover. • Less CO2 / beer gas used: gas no longer fills the supply line and escapes out of the tap. Pacific Beer Equipment | www.beerequipment.com | 1-888-225-2256 Page 2 • Protects flow meters: ideal for computer portion control and metering systems that can lose calibration when gas passes through. • Faster keg changes: no clearing gas and foam from the lines, so servers never wait on orders. • Cleaner lines, fresher beer: full lines reduce beerscale and sludge that form faster when exposed to air. • Easy to clean and service: lock it open for line cleaning, or take it apart and reassemble in minutes. • Simple installation: under five minutes, directly on the keg connector, with no cutting into supply lines. • Built tough: engineering-grade plastics with design recommendations from the Canadian Plastics Institute. Five Base Configurations for Any Setup Whatever your system, our foam control for draught beer units fit it. The DFC can be fitted with a range of base configurations, including keg-mount bases (F10/M10, F8/M8 for MicroMatic tapping heads, F8/FJG6, F10/FJG6) and wall-mount bases (M10/M10, FJG6/FJG6 with 3/8 ′′ John Guest SpeedFit). Trusted Around the World “Wasted beer has been reduced to just a few ounces per keg with the DFC 9500.” — Holiday Inn Hotel, Vancouver, Canada “From 9,000 kegs analyzed, the DFC 9500 saved about 360 kegs, roughly 4% of overall cost.” — Curtis Howser, London, UK “San Francisco Airport calculates annual draft beer savings of $27,248 with the DFC 9500.” — Host Marriott Corporation, Washington D.C. 5-Year Warranty Every DFC 9500 / DFC 9600 is warranted for 5 years from the date of original purchase against defects in workmanship and materials. Invest once in professional beer foam control and protect your profits for years to come. Pacific Beer Equipment | www.beerequipment.com | 1-888-225-2256 Page 3 STOP FOAMING AWAY YOUR PROFITS! Get Beer Foam Control working for your bar, brewery, stadium or restaurant today. Talk to our team and start saving up to a full keg every week. CALL NOW: 1-888-225-2256 Visit www.beerequipment.com Free shipping • Customized label • 5-year warranty