USER MANUAL Step 1: Pick Up the Eyelash Using a pair of fine-tipped tweezers, carefully grip a single eyelash cluster at its very root. Gently lift and remove it from the packaging tray. Ensure the cluster retains its natural curve. Step 2: Apply the Adhesive Dip the base (root band) of the eyelash cluster into a drop of lash adhesive. Gently drag the base against the rim of the glue bottle to remove any excess, leaving a thin, even layer. Step 3: Adhere the Eyelash Looking straight into a mirror, position the cluster as close as possible to your natural lash line. Start from the outer corner of your eye for a guide. Gently press the adhesive-coated base onto your skin, right at the root of your own lashes. Hold it steady for 2-3 seconds to set. Step 4: Seal and Dry Apply a very small amount of lash sealant along the base of the adhered cluster. This step secures the lash and prolongs wear. Allow both the adhesive and sealant to air dry completely for approximately 60 seconds. Avoid getting the lashes wet or rubbing your eyes during this time.